How to increase the volume on Xiaomi wireless headphones: all ways

Xiaomi’s wireless headphones are some of the most popular gadgets, thanks to a combination of price, quality and functionality. But many users face a problem: even at maximum volume, the sound seems quiet, especially in noisy places or when listening to music with low frequencies.

In this article, we’ll look at all the possible ways to increase volume on Xiaomi AirDots, Buds, FlipBuds and others, both through physical buttons on the headphones themselves and software. It’s important to understand that some methods can affect sound quality or speaker life, so we’ll point out the potential risks.

If you want to quickly add sound without unnecessary manipulation, go straight to the section "Manage buttons on headphones." For deep customization, read about the Mi Home app and equalizer.

⚠️ Warning: Boosting volume above factory limits can cause sound distortion or damage to speakers. Xiaomi sets limits not by accident - it's hearing and equipment protection.

1. How to add sound through the buttons on headphones

Most Xiaomi models support physical volume control right on the headphone case, depending on the generation and type of device:

🔹 Headphones with touch control (Xiaomi Buds) 3/4 Pro, FlipBuds Pro):

1. Touch and hold the right earpiece (usually responsible for increasing the volume).
2. Use the left earphone to reduce.

🔹 Headphones with mechanical buttons (Redmi AirDots) 2/3, Mi True Wireless Earbuds Basic 2):

• 🎧 Single press on the right button – increase.
• 🎧 Double pressing on the left - decrease.

📌 Important: On some models (e.g. Xiaomi Air 2) SE) Volume control is disabled by default. To activate it, you need to go to the Bluetooth settings on your phone or the Mi Home app.

1.Make sure the headphones are connected to the phone

2. Check the model - sensory or mechanical

3. Try holding the button 1-2 seconds (for sensor)

4.If it doesn't work, update the headphone firmware-->

2. Volume setting via Mi Home or Xiaomi Wear app

Xiaomi’s official apps allow you to fine-tune the sound, including volume limiters and equalizers.

📱 Steps for Mi Home (suitable for most models):

1. Open the app and find your headphones in the list of devices.
2. Go to the sound settings. → Loudness.
3. Move the slider to the desired level (some versions have the option to Remove the EU restriction).
4. Save the changes.

📱 For Xiaomi Wear (relevant to Buds 3 Pro and newer):

⚠️ Note: The Mi Home app for European models may block a volume slider above 80%. EU Volume Limit (volume limiting to protect hearing) is only possible through the developer mode.

Mi Home|Xiaomi Wear|I don't use it.|Other-->

3. Unlocking restrictions through Android Developer Mode

If your smartphone is on Android, you can turn off the system volume limits for Bluetooth devices, a method that works on most phones, but requires caution.

🛠 Instructions:

1. Activate Developer Mode: Go to Settings → About Phone. Find Build Number and click on it 7 times.

Settings → System → For Developers

Turn off the absolute volume level of Bluetooth

Disable Absolute Volume

Reconnect the headphones.

📊 What does it mean:

⚠️ Note: On some firmware (for example, MIUI 14+) Disable Absolute Volume may not be available, in which case try an alternative method through the ADB (described below).

💡

If after activating the developer mode, the headphones began to connect with a delay, try to disable the AAC audio codec option in the Bluetooth settings.

4.Use of equalizer to amplify sound

The equalizer allows for amplification of individual frequencies, which subjectively makes the sound louder, which is especially useful for models with weak bass (for example, Redmi AirDots 2).

🎛 How to set up:

• 📱 In the Mi Home app: Go to Sound Settings → Equalizer. Choose the preset "Bases" or "V-shaped." Hand-lift the sliders on the top. 60-250 Hz (bass) and 2-5 kHz (medium frequencies).
• 🎵 In a player (e.g. Poweramp or Spotify): Activate the built-in equalizer. Increase gain on +3…+6 dB for low and medium frequencies.

🔍 Lifehack: If your model does not have a built-in equalizer, use third-party apps:

• 🎧 Wavelet (with support) LDAC aptX).
• 🎧 Equalizer FX (simple interface).

Critical information: On Xiaomi Buds 3 Pro and newer models, the equalizer in the Mi Home only works with active ANC (noise reduction).

5. Advanced method: Volume increase through ADB

If standard methods fail, you can manually change system restrictions through ADB (Android Debug Bridge), a method that is suitable for advanced users.

🖥 Step-by-step instruction:

1. Install ADB Tools on your PC.
2. Connect your phone to your computer and activate USB Debugging in the developer settings.
3. Open the command line (cmd) and type: adb shell settings put global bluetooth_a2dp_offload_disabled 1 This disables Bluetooth hardware acceleration, which sometimes removes the limitations.
4. Next Post Adb shell settings put global volume_bluetooth_sco 15 (significance 15 — maximum, usually by default 7-10).
5. Restart the phone and check the volume.

⚠️ Attention: Wrong commands ADB You can also make Bluetooth crashes. Before experimenting, back up your settings with adb backup.

🔧 Alternative method (for the purpose of MIUI):

• Install ViPER4Android via Magisk (root rights required).
• In the module settings, activate the Bluetooth Compatibility Mode and increase Master Limiter to +6 dB.

💡

The ADB method doesn’t work on all Xiaomi models; on some firmware (e.g. MIUI Global), changes are reset after a reboot.

Hardware problems: when software methods do not help

If you’ve tried all the ways but the sound remains quiet, the problem may be the hardware:

• 🔊 Contamination of speakers: Dust and earwax reduce volume. Clean your headphones with a cotton swab soaked in alcohol.
• 🔋 Battery discharge: At a charge level below 20%, many models automatically turn down the volume.
• 🛠 Membrane damage speaker: If the sound wheezes or disappears at high frequencies, repair is required.

🔍 How to diagnose:

💡 Tip: If Xiaomi headphones are guaranteed, do not disassemble them yourself. Contact the service center with a check - according to the law of the Russian Federation (Article 18 ZoZPP) you are required to conduct a diagnosis for free.

7. Alternative ways to amplify sound

If standard methods don’t work, try these options:

🎵 1. Use of an external amplifier

• 🔊 Connect the headphones via a Bluetooth transmitter with an amplifier (for example, FiiO) BTR3).
• 🔊 For wired mode (if supported) use USB-C → 3.5 mm adapter with built-in DAC.

📱 2. Sound settings at the source

• 🎧 On iPhone: Go to Settings → Music. → Select the equalizer and select "Late Night" (increases quiet sounds).
• 🎧 On Windows: In the Control Panel → Sound. → Properties of headphones activate Improvements → Loudness.

🔋 3. Headphone firmware

• 🔄 Some models (Xiaomi AirDots Pro 2) allow you to update the firmware through the Mi Home.
• 🔄 Redmi Buds 3 Lite has unofficial firmware (like BudsXMod), but it requires root on the phone.

⚠️ Note: Unofficial firmware may contain errors or malicious code, install them only from trusted sources (for example, a forum). 4PDA).

Yes, official firmware | Yes, custom |No, I'm afraid |No, I didn't know that I could-->

FAQ: Frequent questions about the volume of Xiaomi headphones