Users often experience discomfort with fully wireless headphones, and Xiaomi Airdots 2 is no exception. The main problem is not the sound quality, but the wrong fit, which leads to the fall of the gadget from the ear shell or, conversely, to painful pressure on the cartilage. Many owners mistakenly believe that it is enough to simply put the device in the ear, ignoring the anatomical features and design of the device itself.
⚠️ Warning: Incorrectly installing the headphone not only reduces the sound quality, but can also damage the microphone or proximity sensor under strong pressure.
Proper wear not only provides comfort for several hours, but also creates the necessary tightness to reproduce low frequencies. In this article, we will discuss in detail the physics of landing, the features of the charging case and the typical mistakes that beginners make when first familiar with Redmi products.
Headphone anatomy and choice of ambusheries
The first step to comfortable use is understanding the design of the audio device. The case Xiaomi Airdots 2 has a specific shape designed to be specific to the orientation in the ear canal. Silicone nozzles, or bulges, play a key role in fixation. The kit usually comes in three sizes: S, M and L, with the ears initially set to medium.
You need to remove the nozzle and check its labeling on the inside to make sure the size matches your expectations. If the standard size M causes discomfort or the sound seems "flat", you should experiment with other options. Small size may not provide proper insulation, and large - cause rapid fatigue of cartilage.
The process of replacing the embroideries requires care, because the plastic tube on which they are put is fragile enough, you need to hold the base of the speaker firmly and smoothly tighten the silicone, trying not to damage the metal mesh of the dynamic head. After installing the new size, make sure that the edges of the silicone fit tightly to the plastic housing around the perimeter.
To test for the right size, you can do a simple thing: pull the earphone slightly after installation, if it is removed easily and without air resistance, then the tightness is broken, in which case the sound will be devoid of bass, and external noise will interfere with listening.
Instructions: How to insert an earpiece into the ear
There is a common misconception that True Wireless headphones need to be inserted vertically. In the case of Xiaomi Airdots 2, the algorithm of actions is different. The shape of the body is designed so that it lies in the ear at an angle, repeating the bending of the channel.
To set it properly, hold the earpiece in your hand so that the logo or indicator is pointed outwards and the sound engineer is looking forward. Hold the device to your ear and start the introduction with light rotational movements, pointing it slightly forward and upwards. Don't try to push it deep right away.
Once the bulk of the body has taken its place, you need to turn the tail of the earpiece back to the earlobe, and this is the turn that locks the device into an anatomical notch and prevents it from falling out when you're moving, and many users ignore this final turn, which is why the gadget is only held by friction of the silicone.
☑️ The right fit for the headphone
If you feel pain or pressure after a few minutes of use, the input angle has been chosen incorrectly or the size of the earpieces is too large, normally the earpiece should feel like a natural extension of the ear without requiring constant correction by the hand.
Working with a charging case: nuances of installation
The charger case for Xiaomi Airdots 2 is made in the form of an oblong capsule with a magnetic fixation system. The correct installation of headphones in the case is critical for their charging and battery safety. Inside the case are recesses with contacts that should exactly match with the charging areas on the legs of the headphones.
It's important to be very orientated: the headphones are placed vertically, dynamically up and down, and the magnets will pull the device up if you bring it close enough, but you don't have to rely on it. If you feel resistance, don't push -- you probably have a broken geometry.
⚠️ Warning: Attempting to shove the headphone into the case horizontally or upside down can lead to breakage of the cover or damage to internal charging contacts.
Once you've put it in, you have to close the lid, it has to close with a characteristic click, and it has to close without gaps, and if the lid doesn't close until the end, it's a curved headphone, and then you don't charge, and the case can run out of pocket because the closing sensor doesn't work properly.
What if the case does not charge the headphones?
Table of compatibility and landing characteristics
For a deeper understanding of the technical aspects, consider the main parameters that affect the ergonomics of the Xiaomi Airdots 2.
| Parameter | Meaning/Description | Impact on landing |
|---|---|---|
| The weight of one earpiece | 4.1 grams | Minimum load on cartilage, but good fixation is required |
| Type of connection | Bluetooth 5.0 | No wires eliminates the risk of pulling at the hook |
| Case material | Glossy plastic | Can slide with a sweaty ear, requires a dry installation |
| Location of sensors | Inside face | If inserted incorrectly, the ear sensor may not work. |
Analysis of the table shows that despite the light weight, the glossy surface requires special attention when installing during sports, sweat can reduce the friction coefficient, and then only the correct landing geometry, which was discussed above, comes to the rescue.
Problems with microphone and voice control
One of the common complaints is that people don't hear well or the voice assistant doesn't respond to commands, and 90 percent of the time, the microphone hole is not aligned correctly with the mouth, and the Xiaomi Airdots 2 has a microphone at the bottom of the leg.
If the earpiece is inserted too deep or inverted, the microphone is overlaid by the ears or clothing, creating a deaf sound effect, and if worn properly, the lower end of the leg should be pointed downwards and slightly removed from under the ears to have direct access to the surrounding air.
And then there's the touchscreen, which is located on the outer flat edge of the earphone, and if you're used to fixing the earphone by grabbing that area, you can accidentally pause the track or reset the challenge, and train yourself to just take the top of the body or the leg, avoiding the touchpad.
💡
Wipe the microphone mesh with a dry toothbrush every two weeks. Earwax and dust quickly clog small holes, causing even a properly inserted earphone to malfunction.
Reset and reconnect for fixation problems
Sometimes software failures can create the illusion of malfunctioning, although the headphone is physically inserted correctly. For example, if one earphone is quieter than another, it can be desynchronization of channels. In such cases, a complete reset of the Xiaomi Airdots 2 settings to factory settings is required.
To perform the reset, remove both earbuds from the case. Then press and hold the touchpads on both devices simultaneously for 5-7 seconds until the indicators light up red. Then put them back in the case and retrieve them - they will go into pairing mode.
Emission sequence:
1. Remove both earbuds.
Press and hold 5 seconds (up to red light).
3. Put it in the case.
4. Remove the device from the phone's Bluetooth list.
5. Perform the pairing again.This procedure helps to eliminate software errors that can affect the operation of proximity sensors and the distribution of sound through channels, which indirectly affects the perception of the correctness of the landing.
💡
The main conclusion of the section: If the physical fit is perfect, but the sound is distorted, perform a full reset (Hard Reset) of headphones before contacting the service.
Frequent errors in operation
Many users make common mistakes that shorten the life of the device, such as storing headphones in a case with a discharged battery for a long time leads to a deep discharge of the Li-Ion battery, after which it may not recover.
Another mistake is using headphones in high humidity or rain.The Xiaomi Airdots 2 model has basic sweat protection but is not waterproof. Moisture entering the body through microphone holes can cause contact corrosion and electronics failure.
And it's also worth mentioning the habit of leaving the case open, which not only causes accidental discharge, but also causes dust and pile to hit the contacts, which ultimately requires cleaning with alcohol or disassembling the device. Always monitor the position of the lid in your pocket.