How to wear Xiaomi AirDots 3 Pro: full instructions with nuances

Why is AirDots 3 Pro so important?

Xiaomi AirDots 3 Pro wireless headphones are not just a gadget for listening to music, but a complex engineering solution where every detail affects sound, comfort and life. Incorrectly worn headphones can cause discomfort during prolonged wear, deterioration in sound quality due to poor insulation or even rapid battery discharge (yes, this is related!).

In this article, we will not only look at the basic putting instructions, but also the unique features of the AirDots 3 Pro that set it apart from previous generations and other brands, such as why the shape of the hoods is asymmetrical, how to properly distribute pressure on the ear, and why the left/right ear may require different approaches.

Before we get to the point, the big question is, what are properly-wearing headphones?

• 🎧 The earpiece sits tightly in the ear, but does not press on the cartilage (no pain even after 2 hours).+ hour)
• 🔇 Passive noise cancellation works at maximum (you can not hear external sounds on the air). 70-80%)
• 🎵 Bass sound deep, and high frequencies - clear, without a "deaf" effect
• 🏃‍♂️ Headphones do not move with sudden movements (running, jumping, tilting the head)

Preparing headphones for the first use

Before you put on the AirDots 3 Pro, you have to prepare them properly, and many people miss this stage, and it's a waste of time, it affects the durability and sound quality.

1. Charge the case and headphones. Even if the indicator shows charge, connect the case to the network for 30 minutes, which activates the calibration of the battery, which is responsible for accurately displaying the level of charge in the Mi Home application.
2. Update your firmware. Go to Bluetooth Settings → Xiaomi AirDots 3 Pro → Update to firmware. New versions often improve noise reduction algorithms and connection stability.
3. Clean the bottles. The factory treats them with a special composition that can leave the film, wipe the silicone nozzles with an alcohol napkin (at least 70% alcohol).

Pay special attention to the choice of earpieces. Included with AirDots 3 Pro come 3 pairs of nozzles size S/M/L. Here is a trick: the size for the left and right ear may differ. For example, 60% of people have a left ear slightly smaller than the right (Journal of Anatomy data).

Step-by-step: how to insert headphones into the ears

Now, to the point of putting your headphones on, follow this algorithm to get the perfect fit.

1. Take the earpiece by the stem. Don't hold it by the body, so you can accidentally tap the touchpad and activate unnecessary commands.
2. Turn the headphone at an angle of 15-20°. The asymmetrical shape of the AirDots 3 Pro suggests that the upper part of the body should be slightly forward (to the temple), rather than strictly upwards.
3. Carefully insert into the ear canal. The earpiece should go to a depth of ~1 cm. You will feel a slight "suction" - this means that the necessary seal for bass has been created.
4. Scroll the earpiece 5-10° clockwise (for the right ear) or against (for the left ear), which will help the earpiece to better "steer" the contours of the ear canal.
5. With a gentle movement, pull the earlobe down, so you straighten the ear canal and improve the fit.

Check the correct landing:

• 👂 The earpiece should not stick out of the ear more than on 3-4 mm (optimally — 1-2 mm)
• 🎛️ When pressing the case with your finger, you should not hear a click (this means that the ambusheure fits tightly)
• 🔊 Turn on a deep bass track (like "Seven Nation Army" - The White Stripes) if the bass sounds blurry, the landing is wrong.

The headphone does not fall out when the head is tilted |

Bass sounds clear, no wheezing |

No pressure on ear coils |

Touch panel not activated accidentally |

The body does not heat up after 20 minutes of use.-->

⚠️ WARNING: If after 10 minutes of wearing you feel pressure in your ear, don't ignore it! Prolonged wearing of improperly chosen earpieces can lead to irritation of the ear canal or even temporary hearing impairment due to constant pressure on the eardrum.

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when putting on AirDots 3 Pro. Here are the most common ones and ways to fix them:

The problem of different volume levels in the left and right earphones deserves special attention. If you notice that one earphone sounds quieter, the reasons may be:

• 🔊 Clogging of the sound channel. Clean the hole with a soft toothpick (not metallic!).
• 📱 The sound balance settings on the phone. Check in Settings → Special facilities → Mono-audio.
• 🔋 Different levels of headphone charge. Fully discharge and charge both earphones to 100%.

💡

If the headphones are constantly falling out when running, try to put them backwards (turning 180°), paradoxically, this method often helps with the abnormal shape of the ear.

How to check the tightness of the landing: a test for noise cancellation

Xiaomi AirDots 3 Pro features a hybrid noise cancellation system that only works when the seat is perfect. Here's how to check how well your headphones isolate external sounds:

1. Turn on ANC mode. To do this, tap and hold the touchpad on any headphone for 2 seconds.
2. Close your ear with your earpiece, and if you hear a noticeable change in sound (it's become "deaf"), it's a wrong landing.
3. Run the test in a noisy place. Play the music on. 50% Volume and rate how well external sounds are suppressed: 🚗 Street noise (cars, conversations) – should be silenced on the street 70-80% 🏠 The sound of the air conditioner working should be almost not heard 💬 The voice of the person nearby should be muffled, but legible (if the voice is near) ANC included)

If the test fails, try:

• 🔄 Change the size of the bottles to a size larger or smaller
• 🌀 Turn the earpiece in your ear on 5-10° sideways
• 🧴 Apply a drop of ear lubricant (such as AudioQuest Ear Gel) to the earbrush for better fit

Durability Tips: How to Wear Headphones to Last Longer

A proper fit affects not only comfort, but also the life of your headphones. Here’s what will help extend the life of your AirDots 3 Pro:

• 🧼 Clean the bottles 2 times a week. Use a cotton swab dipped in an alcohol solution (at least 70%). Do not use water - it destroys silicone!
• 🔋 Don't keep your headphones empty unless you use them anymore. 3 Days, charge until 40-60% Put it in a case. The full discharge kills the lithium polymer batteries.
• 🌡️ Avoid extreme temperatures. Do not leave your headphones in the sun (such as in a car in the summer) or in the cold below. -10°C. This deforms the embushures and reduces the battery capacity.
• 💦 Dry your headphones after sweating. If you exercise, wipe them with a dry wipe after exercise. Humidity speeds up the oxidation of your contacts.

Note the touchpads. AirDots 3 Pro is more sensitive than previous models, to avoid accidental tapping:

• Do not touch your headphones while walking (vibrations can activate commands)
• Turn off gestures you don’t use in the Mi Home app settings
• If you wear a hat or hood, put them on after you have inserted the headphones.

⚠️ Attention: If you notice that one of the headphones is running out faster or sounding quieter, don't delay the diagnosis! 80% of the time, this is due to contamination of contacts in the case, wipe them with a blower (yes, a regular school!) and check the charge.

💡

The ideal fit for AirDots 3 Pro is when you forget that you have them in your ears, and if you feel the headphones after even an hour of wearing, then you need to adjust the landing.

What to do if the headphones fall out anyway?

If you’ve tried all the tips but AirDots 3 Pro stubbornly doesn’t want to keep your ears open, here are some radical measures:

1. Buy winged hoods, like the SpinFit CP100 or Comply Foam Tips, which lock in the ear and prevent it from falling out.
2. Use earbuds. Silicone earhooks (like Shokz) wrap around the ear and hold the earbud.
3. You can set the pressure. The Mi Home app has a Seal Level option (in the ANC settings). Experiment with the values.
4. Sometimes the left ear holds the right earphone better and vice versa (due to asymmetry of the skull).

If the problem is in one headphone, check:

• 🔋 Charge level (a discharged earphone may hold worse due to reduced weight)
• 🧲 Magnet in case (if it is weakened, the earphone is not fixed correctly when charging, which affects the landing)
• 🔧 Fixing the ambusheet (sometimes it unwinds - carefully pull it with pliers)

Walking |

Run |

Head tilts |

Never fall out.|-->

FAQ: Answers to Frequent Questions