How to wear Xiaomi wireless headphones: 7 steps for the perfect fit

Why is the right fit of Xiaomi headphones so important?

Xiaomi’s wireless headphones are some of the most popular on the market, thanks to a combination of price, sound quality and functionality. However, even premium models like the AirDots 4 Pro or Redmi Buds 5 can disappoint if they are not worn correctly. A bad landing leads not only to discomfort during long listening, but also to deterioration in sound quality (loss of bass, penetration of external noise), as well as frequent fallouts when driving.

According to the Counterpoint Research (2023), 68% users are returned TWS-The first month of the headphones was due to ergonomics problems. 80% In some cases, the fault is not the design of the device, but the wrong technique of wearing. In this article, we will discuss the step-by-step instructions for all models. Xiaomi/Redmi, including nuances for sports scenarios, features of earpieces and secrets of long-term operation without fatigue of the ears.

1. Preparation of headphones for the first use

Before you put on new Xiaomi headphones, they must be properly prepared, this applies not only to unpacking, but also to the initial setting, which affects comfort:

• 🔋 Charging to 100%. Even if the headphones come with a partial charge, bring it to the maximum - this activates all the functions of connection stabilization (especially important for AirDots 3 Pro with a high-speed charge). ANC).
• 📱 Reset: If the used headphones or were unstable, reset: press both touchpads for 10 seconds until the red light flashes.
• 🔄 Update firmware. In the Mi Home or Xiaomi Earbuds app, check the software’s relevance – newer versions often improve ergonomics by optimizing weight distribution.

Special attention should be paid to ambusheurs (silicone nozzles).Combined with most Xiaomi models are 3-4 sizes (S/M/L/XL). Sony research (2022) showed that 73% of users use inappropriate size nozzles, which reduces the quality of noise reduction by 40%.

💡

If the kit does not have earpieces of your size, order separately from SpinFit (model) CP100) — They are compatible with most TWS-Xiaomi headphones and provide better tightness.

2. How to determine the correct size of the earpieces?

Selecting the size of the nozzles is a key step. Wrong size leads to:

• 🎵 Loss of bass (due to leaky fitting)
• 😖 Discomfort after 30+ minutes
• 🏃 Headphones fall out when running or sudden movements

To find the perfect size:

1. Take a piece of paper and circle the inside of the ear.
2. Compare the diameter of the hole with the size of the bottles from the kit (usually indicated on the package).
3. Put on headphones with selected nozzles and pull slightly behind them - if they don't fall out, the size fits.

3. Step-by-step instructions: how to properly wear headphones

Wearing techniques affect comfort as much as the size of the instalments.

1. Place the headphone correctly. The Xiaomi logo or microphone should be pointed forward (to your mouth). Most models have the "L" (left) and "R" (right) labels on the body.
2. Pull the ear canal back. Pull the earlobe down lightly, which straightens the ear canal for a deeper landing.
3. Insert the earpiece at an angle. Tilt it 15-20° forward (towards the nose), then scroll back slightly for a tight fit.
4. Check the leakproofness. Close your finger on the ear canal, and if the sound becomes muffled, the landing is correct.

Headphones do not fall out when tilting the head |

The sound is not distorted when you touch the body.|

No pressure on ear cartilage after 10 minutes of wearing |

The microphone clearly transmits voice (check the recording in voice notes)-->

For models with active noise cancellation (AirDots 3 Pro, Buds 4) it is critical that the ear canal is completely blocked, otherwise the ANC will work inefficiently, and the battery will run out faster due to constant sound correction.

4.Typical mistakes and how to avoid them

Even experienced users sometimes make mistakes that spoil the experience of the headphones.

⚠️ Warning: Never put Xiaomi headphones in the forehead (perpendicular to the head) and this leads to pressure on the auditory canal and headaches afterward. 1-2 hours of use. Right angle of entry — 15-25° forward.

• 🚫 Ignoring the "run-in" -- new silicone or foam cloths need to be designed -- put on. 2-3 It's a time at home to make them look like an ear, especially for Buds. 4 memory-foam.
• 🚫 Excessive entanglement. The earpiece should sit tight, but not deep. If you feel pressure on your eardrum, pull it out onto your eardrum. 1-2 lens.
• 🚫 Wearing inside out: Open-engine models (Redmi Buds 4 Lite) have an easy up/down mix, and the right position is when the status indicator looks up and forward.

Another common problem is sweating, and silicone mounts slide when you exercise.

• 💦 Use foam nozzles (such as Comply Foam) – they absorb moisture better.
• 🧴 Apply a thin layer of antiperspirant to the ears (such as Perspirex) before exercising.
• 🔄 Change the earpieces every time. 3-6 Over time, silicone loses its elasticity.

5. Features for sporting scenarios

If you use Xiaomi headphones for running, gym or bicycle, a standard fit may not be enough.

• 🏃 Double-strap: For models without wings (like AirDots 2), use a sports strap (sold separately) that connects the headphones to the back of your head and prevents loss of your head.
• 🎧 Jump test after you're wearing it, jump on the spot. 10-15 If the headphones are not moved, they are ready for loads.
• 💪 In the Xiaomi Earbuds app, activate the “Workout” profile – it increases the volume of ambient sounds for safety (relevant to Buds 4 and newer).

Only models with IPX8 (Xiaomi FlipBuds Pro) are suitable for swimming. Conventional AirDots with IPX4 can withstand only splashes.

1. Check the density of the planting – water should not seep when tilting the head.
2. Use earplugs for additional sealing.
3. After swimming, wash the headphones with fresh water and dry for 2-3 hours.

💡

For running, it is better to choose models with wings (Redmi Buds 5 Pro) or open construction (FlipBuds Pro) - they heat the ear less and fall out less often.

6. How do you get used to headphones when they are pressing?

If you feel uncomfortable after 30-60 minutes of wearing, don't rush back your headphones. In many cases, it's a matter of getting used to it. Here's the adaptation plan:

If the discomfort does not go away for more than a week:

• 🔄 Try other shaped ambushes (for example, oval instead of round ones).
• 🩹 Use silicone pads between the earpiece and ear (sold in accessories stores).
• 📉 Turn down the volume – high decibels increase pressure on the eardrum.

⚠️ Warning: If you experience ringing in your ears or temporary hearing loss after wearing headphones, stop using immediately and contact the ENT.This may be a sign of barotrauma due to improper pressure distribution.

7. Headphone care for long-term use

Proper care extends the life of the bottles and improves the fit over time.

• 🧼 Clean. Clean your earpieces once a week with an alcohol towel (don't use water, it corrodes silicone). Use a soft brush to clean the microphone.
• 🔋 Storage. Keep your headphones in your case -- without protection, silicone will deform in the case. 2-3 Avoid high temperatures (do not leave in the sun or near the battery).
• 🔄 Replacement of the bulges. Silicone nozzles wear out for 6-12 Signs to replace: Loss of elasticity (nozzles don't return to shape after compression) Microcracks Emerge Headphones start to fall out with movements that didn't cause problems before

For models with touch control (AirDots 3 Pro, Buds 4), avoid pressing with excessive force - this shifts the earpiece in the ear and over time loosens the mounting of the earpieces.

💡

If the headphones began to hold worse, try to heat the earpieces with a hairdryer (temperature to 40 ° C) for 10-15 seconds - this will temporarily restore their elasticity.

FAQ: Frequent questions about landing headphones Xiaomi