How to wear headphones Xiaomi AirDots: the secrets of comfort and safety

Xiaomi AirDots wireless headphones have gained popularity due to a combination of affordable price, high-quality sound and usability. However, even such compact gadgets have nuances of operation that affect comfort, sound quality and life. One of the key points is the proper wearing of headphones. Careless handling can lead to loss during movement, discomfort during prolonged wearing or even damage to the speakers.

In this article, we will discuss not only the basic technique of wearing all models of AirDots (including AirDots Pro). 2/3, AirDots Youth and AirDots SE), But also reveal professional secrets: how to choose the best earpieces, check the tightness for better noise insulation, avoid the loss of headphones during sports training. We will pay special attention to the typical mistakes that even experienced users make, and give recommendations for the care of headphones so that they last longer.

Why it is important to wear AirDots correctly: 5 reasons

So, what's so hard about putting headphones in your ears? In practice, a wrong fit leads to a whole host of problems.

• 🔊 Sound deterioration: loose fit of the earpieces reduces bass frequencies and misses external noises, which makes the music sound "empty".
• 🏃 Loss of movement: even a light jog or a sharp turn of the head can cause the loss of the earphone if it is not fixed correctly.
• 😖 Wearing discomfort: Pressure on the ear or ear canal causes headaches after 30 to 60 minutes of use.
• 🔋 Fast battery discharge: with poor tightness, the user is forced to increase the volume, which reduces the operating time from a single charge.
• 🛠️ Damage to speakers: If the earphone constantly falls and falls, over time, it can lead to microcracks in the body or membrane.

According to a study by SoundGuys (2023), 68% of wireless headphone users experience problems due to improper fitting, but only 12% know how to solve them. Meanwhile, AirDots take no more than 10 seconds to wear correctly, and the effect lasts for the whole day.

Preparing headphones for the first use

There are several steps you need to take before you wear AirDots, both new headphones and those that have been out of use for a long time.

1. Charging the case and headphones. Even if the indicator on the case is green, check the charge level through the Mi Home or Xiaomi Wear mobile application. The minimum threshold for stable operation is 30%.
2. Update firmware. Outdated software can cause connection or sound problems. Update your headphones through the official app (path: Devices) → Headphones → Firmware update).
3. Cleaning the earpieces and speakers. Use a soft brush or cotton swab dipped in alcohol to remove factory lubrication or accumulated dirt. Never use sharp objects, this will damage the speaker's protective net.
4. Select sized bottles, complete with AirDots 3–4 silicone pairs (sizes) S/M/L). Choose those that tightly fit the ear canal, but do not cause pressure.

If you buy used headphones, be sure to reset to the factory settings.

1. Put both earbuds in the case.
2. Press the button on the case for 10 seconds until the indicator starts flashing red and white.
3. Connect the headphones again via Bluetooth.

Step-by-step: how to properly wear AirDots

The technique of putting on depends on the headphone model, but the general principles are the same. Consider a universal algorithm that is suitable for most versions of AirDots.

Step 1: Determine the right and left earphone

On the body of each headphone there is a marking:

• R (Right) is right.
• L (Left) is left.

In some models (for example, AirDots Pro 2), the labeling is on the inside of the earpiece. If the labels are erased, focus on the shape: the right earphone usually has a more rounded edge.

Step 2: Right position in the ear

Take the earphone with your thumb and index finger, placing it at an angle of 15-30° Carefully insert into the ear canal, then scroll slightly clockwise (for the right ear) or against (for the left) to make the earbrush fit tightly.

The key is that the earpiece should not sit on the cartilage of the ear, but inside the ear canal, and if you feel it hanging on the ear, remove it and put it back on.

Step 3: Checking the leakproofness

After both earphones are on, perform the test:

1. Turn on the music at medium volume.
2. Close the ear canal with your finger (do not press the earphone!).
3. If the sound became noticeably quieter or there was a feeling of "stuffiness" - the tightness is normal. If the sound has not changed, the insulations are chosen incorrectly.

💡

For models with active noise cancellation (ANC) First, disable this feature in the settings – it can distort the results of the leak test.

Step 4: Fixing for active use

If you exercise or move frequently, use additional fixation methods:

• 🎧 Ear Loops: Some models (like the AirDots Pro 2) come with silicone arches attached to the earpiece and cover the ears to prevent loss of the ear.
• 🧢 Headgear: A cap or bandana presses headphones to the head, but can make sound worse due to pressure on the earpieces.
• 🔄 Double scrolling: After putting on, slightly pull the earphone down, then scroll again - this improves grip on the ear.

💡

For models with a wear sensor (such as the AirDots Pro 3), don’t press the headphone after putting on – it can knock off the automatic calibration.

Typical AirDots Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes that spoil the experience of using headphones, and here are the most common ones:

⚠️ Warning: If you feel pain or pressure in your ear after wearing, remove your headphones immediately. Prolonged wear in this condition can lead to inflammation of the ear canal or headaches.

• 🚫 Using dirty earbrushes: A buildup of earwax and dust not only makes the sound worse, but can irritate the skin. Clean the nozzles once a week with a soft brush or special wipes.
• 🚫 Wearing the opposite. If you mix right and left headphones, the sound scene will be distorted (for example, the voice in the podcast will sound right, not left). In some models, this also disables touch control.
• 🚫 It's too deep, and the ear canal should be sitting at the entrance to the ear canal, not deep inside, and it's fraught with injury and discomfort.
• 🚫 Ignoring the leak test. Without checking, you may not notice that one of the headphones is not sitting tight, which will cause the sound to be unbalanced.
• 🚫 Wearing while sleeping. Even if the headphones are comfortable, prolonged pressure on the ear cartilage can cause swelling.

Another common problem is that one earpiece falls out on its own while talking or chewing, and this is because of the jaw movement that shifts the ear canal.

• Before putting on, slightly open your mouth (as with yawning) - this will expand the ear canal.
• Use earbuds with an emphasis on antitragus (cartilage in front of the ear).

How to check if the headphones are worn correctly: 3 tests

Not sure you've done the job? Do these simple tests to make sure you're fitting properly.

1. Stability test

After putting on:

1. Shake your head from side to side.
2. Tilt your head forward and backward.
3. Pull the earlobe down a little.

If the headphones do not move and do not fall out, the landing is reliable.

2. Sound test

Include a track with clear bass lines (e.g., "Seven Nation Army" - The White Stripes) and notice:

• 🎵 Basses should be felt physically (light vibration) rather than sounding flat".
• 🎵 The sound should not “leak” outwards (ask someone to listen from a distance of 30 cm – they should not hear your music).
• 🎵 The volume of the sound scene should be balanced (no shift left / right).

3.Comfort test

Wear your headphones for at least 20 minutes without interruption.

• 😊 No pain or pressure in the ears.
• 😊 No feeling of “stuckness” (if it does not disappear after 5 minutes – the embushures are too large).
• 😊 The skin around the ear did not turn red after removal.

⚠️ Attention: If you find that one earphone sounds quieter than the other after the tests, don't blame the manufacturer. 90% of the time, the problem is solved by fitting correctly or changing the earpiece. Only if the difference persists, check the phone's sound balance settings or update the headphone firmware.

Care Tips: How to prolong the life of earbuds and headphones

Wearing the right clothes is only half the success, and to make AirDots last longer, follow these guidelines:

• 💧 Avoid moisture despite the declared protection class IPX4 (Most models don't wear headphones in the rain or in the shower, and salty sweat can also erode silicone nozzles -- wipe them after exercise.
• 🌡️ Do not leave it in the sun. High temperatures (such as in a car in the summer) deform the embroideries and reduce battery capacity.
• 🔌 Charge correctly. Use only the original Xiaomi cable and adapter (or certified counterparts). Charging from powerful power supplies (>10W) Damages to the battery controller.
• 🧼 Brush regularly. Use dry cotton swabs or special sticky stickers to remove earwax (for example, 3M Earwax Removal.Do not use alcohol more than 1 time a month - it dries silicone.
• 📦 Keep it in your case. Even if your headphones are dead, don't leave them on the table, which increases the risk of loss or mechanical damage.

The average life of the AirDots is 6-12 months with heavy use. If they have lost elasticity or started to crumble, replace them. The original AirDots nozzles can be ordered on AliExpress or at Xiaomi brand stores (the article is usually listed in the instructions).

💡

If the bottles are slippery, wipe them with a dry microfiber wipe, it will restore the grip on the skin. Do not use wet wipes or soap!

Frequent questions about wearing Xiaomi AirDots