Modern wearable gadgets have ceased to be just pedometers and have become powerful tools for health control. Xiaomi Mi Band 4 became a real hit thanks to the colored AMOLED-But to make the device reach its full potential, you need to do a good initial setup and optimization.
Owners often have difficulty pairing or are unaware of the hidden capabilities of the firmware. Mi Band 4 requires careful attention to application versions and regional settings. In this article, we will detail the process of activating, adjusting notifications and fine-tuning sensors for maximum measurement accuracy.
An incorrect configuration can result in a fast battery drain or no notifications.We will help you avoid common errors and set your device up so that it works as a single organism with your smartphone.This guide is relevant for all versions of the tracker, including NFC and Global edition.
Preparation for interface and installation of software
The first step is always to prepare the software. The tracker will require the official Mi Fit app (or its analogue Zepp Life), download the program exclusively from official Google Play stores or the App Store to avoid malicious code.
Once you install the app, you need to create an account or log in via social networks. The region of the account is critical: for the correct operation of all functions, it is recommended to choose the country corresponding to your location, or China / Europe depending on the version of the bracelet.
⚠️ Before turning on the bracelet, make sure it is charged at least on 20-30%. Fully discharged lithium batteries can wake up for a long time and not appear in a Bluetooth search.
It is also important to check the version of your smartphone’s operating system. Mi Band 4 requires Android 4.4 or iOS 9.0 and higher to work smoothly. Make sure that Bluetooth and geolocation (GPS) are enabled in the phone’s settings, as without permission to access the location, the device may not be searchable.
Activation and Primary Synchronization Process
Launch the app and press the Add Device button, and the system will tell you to choose the type of gadget — in this case, an activity tracker — and the app will start scanning the available devices within range.
The Mi Band 4 screen may have a pairing request that needs to be confirmed by touching the touch button. If the device is not automatically located, try restarting Bluetooth on the phone or restarting the app itself.
- 📱 Make sure the bracelet is not connected to other devices in the background.
- 🔄 Restart your smartphone if the search takes more than 2 minutes.
- 🔋 Bring the tracker closer to the phone (less than 10 cm).
At the time of connection, the bracelet will appear on the screen QR-A code or vibration signal. Once a successful connection is made, time and date synchronization will begin. This is a basic process that cannot be interrupted until the firmware update is complete.
☑️ Checking before synchronization
Configuring the interface and dials
One of the main features of the model was a color display, where the user can choose one of the preset dials or download a new one from the directory. To do this, go to the device profile and select the dial.
There are many free and paid options available in the store, and customization allows you to display the most important data: pulse, steps, weather or date, and choosing a static image consumes less energy than animated themes.
| Screen setting | Description | Impact on the battery |
|---|---|---|
| Brightness | Adjustment of illumination (1-5) | High. |
| Wrist lifting | Activation of the screen by movement | Average. |
| Time out | Time to screen-extinguishing | Low. |
| Do not disturb mode. | Turning off the lights at a given time | Savings |
To save charge, it is recommended to set the automatic switch off of the screen after 5-10 seconds, and it is also worth adjusting the sensitivity of the wrist lift so that the screen does not light up with every wave of the hand during a conversation.
💡
Use dark dials on the AMOLED-The black pixels on these displays do not consume energy, which significantly prolongs the autonomy of the device.
Configuration of notifications and alerts
Notification functionality is why many people buy fitness bracelets. Xiaomi Mi Band 4 can display messages from instant messengers, SMS and system notifications. To activate, go to the app settings and find the Application Notifications section.
You need to check the boxes against the right programs (Telegram, WhatsApp, Viber, etc.) It is important to understand that the bracelet only broadcasts the text that comes to the application on the phone. If the notification did not arrive on the smartphone, it will not appear on the wrist either.
⚠️ Note: Android phones must allow Mi Fit to access notifications in the phone’s system settings. Without this permission, the bracelet will be silent.
You can adjust the vibration and the time of the message, and you can turn off the vibration response for certain applications, leaving only the visual alert, which is useful if you're quiet, but you want to see the incoming ones.
Health monitoring and sports regimes
The main task of the tracker is to collect health data, the device is equipped with an optical pulse sensor that operates automatically, and you can set the frequency of measurements in the application: from 1 minute to 30 minutes.
Frequent pulse measurements (1 min) significantly increase the accuracy of the charts, but reduce battery life. For the average user, an interval of 10-30 minutes is the best option, and sleep and stress monitoring (PAI) is also available.
- 🏃♂️ Running: exact GPS-tracking (via phone) and pulse zones.
- 🏊♀️ Swimming: water resistance 5 ATM allows swimming.
- 🚴♂️ Cycling: Speed and distance accounting.
To start the workout, select the appropriate mode in the bracelet menu. Mi Band 4 supports 5 main sports modes. After the activity is over, the data is synchronized with the smartphone, where you can see detailed statistics.
Hidden sports regimes
Advanced settings and battery optimization
To keep the device running for a long time, it is important to properly configure the background processes.The autonomy of the Mi Band 4 can reach 20 days, but when used actively with notifications and a pulseometer, this period is reduced to 7-10 days.
It is recommended to turn off the function of "Raising the wrist" at night or use the "Do not disturb" mode, and it is also worth limiting the number of applications that send notifications, leaving only the most important ones.
The app also includes the feature of Find the bracelet and unlock the screen (for some Android smartphones), which allows you to unlock the phone by simply looking at the screen while the bracelet is on your hand.
💡
The optimal balance between function and autonomy is achieved by measuring the pulse every 10 minutes, the wrist lift included and a moderate number of notifications.
Regularly update the device’s firmware through the app. Xiaomi engineers are constantly releasing patches that correct errors and improve sensor accuracy.