How to wear Xiaomi Redmi wireless headphones: instructions with tips and life hacks

Why it is important to wear wireless headphones correctly

Xiaomi Redmi Buds wireless headphones (including Redmi Buds 4 Pro, Redmi Buds 3 Lite and others) are not just an accessory, but a high-tech device that depends on the correct use of sound quality, comfort and even safety. Improper wear can lead to poor noise insulation, loss of headphones while driving or even damage to the membrane due to loose fit. For example, if the ambusures (silicone nozzles) are chosen incorrectly, bass will “fail” and high frequencies – cut the hearing.

Xiaomi also uses active noise reduction in its models (ANC) It's a transparent mode that only works when it's airtight, and if the headphones are sitting crooked, those functions will simply shut down or not work properly. In this article, we will analyze not only the basic instructions, but also unique nuances for Redmi models with touch control and Bluetooth 5.3 support, which are often missed even in the official guides.

Preparing headphones for the first use

Before you wear Xiaomi Redmi Buds, you need to follow a few mandatory steps. First, check the configuration: the box should be the headphones, charging case, cable. USB-C (Or Micro-USB for older models, and 2-3 pairs of interchangeable bottles of different sizes, and if something is missing, it's an excuse to go to the store, because without the original nozzles, it will be extremely difficult to achieve the correct fit.

Second, charge your headphones to 100 percent, and even if the indicator on the case shows a charge, it doesn't guarantee that the headphones themselves are fully charged.

• 🔋 Put the headphones in the case and close the lid.
• 📱 Bring the case to the smartphone - a pop-up indicator of the charge level should appear (works on the device). MIUI 12+ Android 10+).
• 🔄 If the indicator does not appear, restart the case: press and hold the button on the back panel for 10 seconds.

Also, before you use it for the first time, update your headphone firmware through the Mi Home or Xiaomi Earbuds app. Outdated software can cause connectivity and management problems.

1. Open the Mi Home app.
2. Go to Profile. → My devices. → Redmi Buds headphones.
3. Click on the three dots in the upper right corner and select Update firmware.

Choosing the Right Size of Ambusheries

The most common mistake users make is using the wrong sized earpieces. Xiaomi typically completes headphones with three pairs of headphones: S (small), M (medium), and L (large), but even if you think the M size fits, it's not always the case.

1. Check your ear canal: take a mirror and see how wide your ear canal is. If it's narrow, start with a size S.
2. Put on your headphones without the music on and spin them around your ear a little bit. They should suck in, not hang around.
3. Shake your head: if the headphones do not fall out and do not shift, the size is chosen correctly.

For models with active noise cancellation (for example, Redmi Buds 4 Pro), the adhesion density is critical.

• 🎧 Turn on the mode. ANC In the Mi Home appendix.
• 👂 If you put your palm over your ear with your earpiece, if noise reduction works, you'll hear a characteristic "hisping" or a decrease in external sounds.
• 🚶 Walk around the room: if the sound does not “float” when the jaw moves, the earpieces sit correctly.

⚠️ Warning: If you feel pain or pressure after 10-15 minutes of wearing, remove your headphones immediately. Prolonged wearing of inappropriate earpieces can irritate the skin or even inflame the ear canal.

Step-by-step: how to insert headphones into the ears

Now, to the process itself, it's important to understand that the Xiaomi Redmi Buds are ergonomic, so you have to insert them at a certain angle.

1. Take the earpiece with your right hand (for your right ear) and unfold it so that the microphone is pointing down and slightly forward (to your chin).
2. With your left hand, pull the earlobe downwards - this straightens the ear canal.
3. Carefully insert the earpiece into the ear and scroll it slightly clockwise (for the right ear) or against (for the left).
4. Make sure the headphone is sitting tight: you should feel a slight "suction".
5. Repeat for the second ear.

For models with stems (such as the Redmi Buds 4 Pro), it is important that the stem is parallel to the cheek, rather than sticking to the side.

💡

If your headphones are falling out all the time, try putting them inside out: take a left ear ear ear ear and put them in the right ear, and vice versa. Sometimes ear canal asymmetry requires this approach.

After the headphones are on, perform a leakproofness test:

• 🎵 Turn on the music at medium volume.
• 👆 Carefully pull the earpiece over you. If the sound gets quieter, the fit is tight.
• 🗣️ Try talking: if you hear your voice from inside your head, the headphones sit right.

Synchronization and connection to the phone

Getting the right fit is only half the success. To make the headphones work, you need to sync them up and connect them to your smartphone. Most Redmi Buds models sync automatically when you first remove them from the case, but sometimes you need to manually adjust them.

If the headphones are not connected:

1. Put both headphones in the case and close the lid for 10 seconds.
2. Pull them out and hold the touchpads on both headphones for 5 seconds until the indicators start flashing red and white.
3. Turn on Bluetooth on your phone and find it in the Redmi Buds Device List XXX (where XXX — model).
4. Connect if you're asked. PIN-code - enter 0000.

For dual-connection models (such as the Redmi Buds 4 Pro), you can connect your headphones to your phone and laptop at the same time.

• 📱 Connect the headphones to the first device (phone).
• 💻 On the second device (laptop) turn on Bluetooth and find Redmi Buds XXX.
• 🔄 Press Connect. Headphones will automatically switch between devices depending on activity.

⚠️ Attention: If the headphones are connected only one at a time, this is a sign of resetting sync. To fix: 1. Put the headphones in the case. 2. Press and hold the button on the case for 15 seconds until the indicator flashes three times red. 3. Remove the headphones and connect again.

Removing typical problems when wearing

Even if you do everything according to the instructions, there may be difficulties, and let's look at the most common ways to solve them:

If the headphones are hanging, but the size of the earbuds is maximum, try a two-layer fit:

• Put on the headphone first the M size earpieces.
• On top, put on size L earpieces (it should fit tightly around the first one).
• Insert the earpiece into the ear - this will increase the density of fit.

Another common problem is long-term wear discomfort, which may be related to:

• 🩹 Silicone allergy - try foam embusheries (sold separately).
• 🔊 Pressure too high – reduce the size of the bottles or take a break every 2 hours.
• 💦 Sweating – wipe your headphones with salicylic alcohol after training.

Features of management and wearing

Xiaomi Redmi Buds models come with touch controls that can be confusing for newcomers, such as the Redmi Buds 4 Pro:

• 🎵 One touch - playback/pause.
• 🔀 Double touch - the next track.
• 🔙 Triple touch - previous track.
• 🔇 Retention 2 Seconds – switching noise reduction modes (ANC/clear-off).

Important: Don't press too hard, it can move the earpiece in the ear and break the tightness, and avoid accidental touch when you put it on or remove it.

For self-enabled models (such as Redmi Buds 3 Lite), the headphones start playing music immediately after putting on. If this interferes, turn off the feature in the Mi Home app:

1. Open Mi Home → Redmi Buds headphones → Settings.
2. Find the Autoplay option and turn it off.

💡

Touch control on Redmi Buds only works when you fit properly, and if the touch doesn't work, check if the headphones are tight and if the microphone is closing your finger.

When wearing on the street, consider:

• 🌧️ Headphones have protection IPX4 (from splashes, but cannot withstand immersion in water.
• 🌬️ In high winds, turn on the transparent mode to hear the surrounding sounds.
• ❄️ In the cold, the battery sits down faster - keep the case in your inner pocket.

Care and storage: how to extend the life of headphones

Proper care has a direct impact on sound quality and lifespan, and here are the key recommendations:

1. Cleaning: 🧼 Wash the bottles with warm water and soap 1 time a week. 🎛️ Grille speakers clean dry soft brush (for example, toothbrush). 🚫 Do not use toothpicks or needles – they can damage the membrane.
2. Storage: 📦 Always put headphones in the case - this protects against dust and mechanical damage. 🔋 Keep the charge case at a temperature of 0-35°C. In cold or heat, the battery degrades faster.

Charging.

• ⚡ Use only the original cable or certified cable. USB-C.
• 🔋 Do not leave the case on charge for more than 2 hours after full charge.

⚠️ Attention: If the headphones stopped holding the charge, this may be due to swelling of the battery due to the use of non-original chargers. In this case, contact the service center - self-repair can cause fire.

For extension of the life of the bulges:

• 🔄 Change them every 3-6 months (silicone loses elasticity over time).
• 🛒 Buy the original Xiaomi nozzles - cheap analogues may not fit in size.

FAQ: Frequent questions about Xiaomi Redmi Buds