How to use Xiaomi Mi True Wireless Earbuds Basic 2: detailed instructions with tips

Xiaomi Mi True Wireless Earbuds Basic 2 is an affordable and functional solution for those who value freedom of movement and high-quality sound. Despite the budget price, the model offers a stable Bluetooth connection, a compact charging case and intuitive control. However, even such simple devices have nuances that should be considered when you use them for the first time.

In this article, we'll take everything from basic smartphone connectivity to the subtleties of customizing the sound to fix typical problems, learn how to wear headphones properly so they don't fall out, how to extend battery life, and what to do if one earphone stops working, and also unique features that aren't written about in the official instructions, such as how to reset to factory settings without a smartphone.

Whether you bought the Mi True Wireless Earbuds Basic 2 for sports, work or everyday music, here you will find the answers to all the questions.

Xiaomi Mi True Wireless Earbuds Basic 2 Connected to Smartphone

The first time you turn on your headphones can raise questions, especially if you haven’t used wireless gadgets before.The process of connecting to Android or iPhone takes no more than a minute, but there are a few things that will speed up the setup.

To activate the headphones, follow the following steps:

• 🔋 Take both of these headphones out of the case, they'll automatically turn on and go into pairing mode, and the indicator on the case will flash white and red.
• 📱 On your smartphone, turn on Bluetooth in settings or through the Quick Access Panel.
• 🔍 In the list of available devices, find Mi True Wireless Earbuds Basic 2 (sometimes displayed as Mi Basic 2) and click Connect».
• 🎧 After successful pairing, the indicator on the case will light up blue, and a notification about the connection will appear in the phone.

If the headphones are not determined, check:

• 🔄 Make sure they are not connected to another device (like a laptop). To do this, press and hold the touchpad on any headphone for 5 seconds until you hear the audible shutdown beep.
• 🔋 Case charge and headphones (the indicator on the case should burn green at full charge).
• 📶 Distance between headphones and phone – it should not exceed 10 meters without obstacles.

On Xiaomi Android smartphones (for example, Redmi Note 10 or POCO X3), after connecting, a pop-up will appear with a suggestion to install the Mi Earphones branded application. Its installation is not mandatory, but with it you will get access to additional settings, for example, selecting sound mode or updating the firmware.

⚠️ Note: If you connect your headphones to your iPhone, some features (such as displaying battery power) may not work properly.This is due to the limitations of iOS for third-party devices.

Headphone management: gestures and buttons

Xiaomi Mi True Wireless Earbuds Basic 2 features touch panels that respond to touch. The controls are intuitive, but not all users are aware of the hidden features. For example, you can not only turn on / off music, but also activate voice assistant or skip tracks.

Here is the full list of gestures supported:

Note that the left earphone does not support music control by default, only calling the voice assistant and on/off. This is done to save battery power, since the main load falls on the right earphone, which is the “leader” in the pair.

Make sure the headphones are connected to the phone.|Check that the touch panels are clean (the dirt can block touches)|Touch the center of the panel, not the edges.|Reset your headphone settings if gestures don't work-->

If you’re uncomfortable with default gestures, you can reassign them via the Mi Earphones app (available only for Android).For example, you can set up a double tap on your left earphone to call the latest app or turn off noise cancellation (although Basic 2 doesn’t have this feature, but older models do).

⚠️ Warning: Excessive use of touch panels (e.g., constantly switching tracks) can lead to false positives when walking or running.In this case, calibrate sensitivity in settings or reduce the force of pressing.

Charging headphones and case: how to extend the battery life

The Xiaomi Mi True Wireless Earbuds Basic 2 runs up to 5 hours on a single charge at 50% volume and up to 20 hours on case charges, but these numbers can be significantly reduced if you don't monitor the battery. Here are some tips on how to maximize battery life:

• 🔌 Don't leave your headphones in a discharged state for long, which shortens the life of your lithium-ion batteries. Put them on charge when the level drops below 20%.
• ☀️ Avoid overheating: Do not charge the case in direct sunlight or near heat sources (e.g., on the dashboard of the car).
• 🔄 Once a month, perform a full discharge-charging cycle (0% to 100%) to calibrate the battery controller.
• 📵 Turn off Bluetooth on your phone when you’re not using headphones – it will reduce background energy consumption.

Indicators on the case help to control the level of charge:

• 🟢 Green: Charge over 60%.
• 🟡 Yellow: 20 to 60 charge%.
• 🔴 Red – charge less than 20%, requires connection to the charger.
• 🔄 Blinking white - there is a process of charging headphones inside the case.

To charge the case, use a USB Type-C cable (included) and a power adapter with an output current of at least 1A. Full charging takes about 1.5 hours. If the case is not charging, check:

• 🔌 Correction of cable and connector (try another cable).
• 🧹 Cleanliness of contacts inside the case – sometimes dust or dirt interferes with current transmission.
• 🔋 Case battery status (if it is not turned on at all, it may be necessary to replace the battery).

💡

If the headphones are dead and the case is also down, plug the case into charging for 5-10 minutes, enough to give the headphones enough power to run for 30-60 minutes.

Wearing and comfort: how to fit headphones in the ear

One of the most common problems with Mi True Wireless Earbuds Basic 2 is falling out of your ears while you're driving, because you only have 3 pairs of silicone embroideries (sizes S, M, L) and you don't always get the perfect one on the first try.

1. Insert the headphones correctly: gently scrolle them in the ear canal so that the earpiece fits tightly against the walls. The earpiece should be sucked inward, not dangling.

Experiment with sizes: Even if you think the size M is right, try L – sometimes the larger one is better fixed.

3. Check the symmetry: if one earphone sits tighter than the other, perhaps the ears are different shapes, in which case you can combine the dimensions (for example, the left is M, the right is L).

For sports or active movements, ear hooks can be added to the headphones (sold separately) to prevent loss even when the head is turned sharply.

Another nuance is hygiene: Silicone earwaxes accumulate earwax and bacteria over time, which can lead to irritation, wash them once a week with warm water and soap and dry them in the air (do not use a hair dryer or battery!).

⚠️ Warning: If you experience discomfort or pain in your ears after prolonged wearing of headphones, take a 1-2 hour break. Prolonged pressure on the ear canal can cause headache or temporary hearing impairment.

Sound and microphone settings

By default, the Xiaomi Mi True Wireless Earbuds Basic 2 offers a balanced sound profile, but it can be customized to your preferences.

1. On Android: install the Mi Earphones app from Google Play, which has 3 preset modes:

Bass boost (enhances low frequencies, suitable for electronic music)

Clear vocals (emphasizes the medium frequencies, perfect for podcasts)

Balanced (standard profile)

2. On iPhone: use the built-in equalizer in Settings → Music → Equalizer. Recommended presets:

- Pop music for modern tracks.

- Rock for guitar parts.

- Voice boost for podcasts and audiobooks.

The microphone in Basic 2 is medium-quality, enough to make calls in a quiet room, but on the street or in a noisy place, the person may not hear you well.

• 🎤 Speak clearly and close to the microphone (located on the outside of the earpiece).
• 🔇 When ringing on the street, cover the second headphone with your palm - this will reduce wind noise.
• 📱 Use noise reduction applications (e.g. Krisp for Zoom or Discord).

💡

For better microphone sound, use only one earpiece (right earpiece) during calls, which will reduce noise interference.

Update firmware and reset settings

The manufacturer periodically releases firmware updates for Xiaomi Mi True Wireless Earbuds Basic 2, which improve connection stability, add new features or fix bugs. You can check the relevance of the version through the Mi Earphones app (Android only).

Instructions for updating:

1. Open the Mi Earphones app and connect the headphones.
2. Go to the Firmware Update section (usually located in the settings menu).
3. If a new version is available, click Update and wait until the process is complete (~5 minutes).
4. Do not disconnect the headphones from your phone and do not close the app until the end of the update!

If the headphones start to glitch (switch off, play poorly or not respond to touch), resetting to factory settings will help.

Method 1: Through the app (Android only):

1. Open Mi Earphones.
2. Go to Settings → Reset settings.
3. Confirm the action.

Method 2: Manual reset (works on all devices):

1. Put both earphones in the case.
2. Open the case lid.
3. Press and hold the button on the back of the case for 10 seconds until the indicator flashes red and white.
4. Close the lid and wait for the reboot (the indicator will go out and light up again).

Typical problems and their solutions

Even reliable headphones like the Mi True Wireless Earbuds Basic 2 sometimes have problems, and here are the most common ones and ways to fix them:

If none of these things worked, there may be a hardware problem, so you can contact Xiaomi's service center (especially if the headphones are warranty-free), and don't try to disassemble them yourself, which could lead to a loss of warranty.

⚠️ Warning: If the headphones get caught in rain or have been flooded with liquid, turn them off immediately, dry for 24 hours in a dry place (do not use a hair dryer or heat!) and only then try to turn on. Xiaomi Mi True Wireless Earbuds Basic 2 has no official water protection (IPX4 Only on more expensive models, so contact with moisture can make them fail.

FAQ: Answers to Frequent Questions