Instructions for using the Xiaomi scooter: from the first trip to maintenance

Xiaomi scooters have become one of the most popular vehicles in the city – they are compact, environmentally friendly and capable of speeds up to 25-30 km / h. However, even such simple at first glance devices have nuances: from the correct assembly to the intricacies of management and maintenance. If you just bought a Xiaomi M365, Pro 2, 4 Pro or another model, this article will help to avoid typical errors and extend the life of equipment.

We will not only examine the basics of how to turn on the scooter or fold it, but also the less obvious: calibrating the brakes, setting up the Mi Home mobile app, caring for the battery and even the legal aspects of driving, and focus on the unique energy saving feature in the 2023-2026 models, which is missing in older versions.

1. First assembly and preparation for the trip

Xiaomi’s new scooters are usually semi-disassembled, and in the box you’ll find the body itself, the steering wheel (sometimes separately), the charger, the folding key, and instructions in several languages (unfortunately, the Russian version is often shortened).

The assembly takes no more than 5-10 minutes:

• 🔧 Hold the steering wheel: insert it into the base and tighten the two bolts on the side (use the key from the kit.
• 🔋 Connect the battery: if the scooter is new, it is discharged by 30-40%. Connect the charge to the socket, then to the socket on the case (it is located under a rubber plug).
• 📱 Install the app: download Mi Home (Android/iOS) You need this to unlock the maximum speed and update the firmware.

Before the first trip, be sure to check the tire pressure. The optimal value for most models is 2.5-3.0 bar (indicated on the side surface of the wheel), Low pressure impairs handling and increases the risk of puncture.

2.Scooter control: basic actions

The scooter is switched on and off with a single button on the steering wheel (usually illuminated in blue or white) to start the device:

1. Press the power button and hold for 2-3 seconds until the indicator lights up.
2. Wait for the beep (one short beep means ready for the trip).
3. Put one foot on the platform, the other push off the ground – the engine is activated automatically at a speed of 3-5 km / h.

The braking occurs in two ways:

• 🛑 Electronic brake: press the steering lever (left hand for most models) and it activates energy recovery by charging the battery.
• 🦵 Foot brake: step on the rear bumper (lit in red) used for emergency stop.

Important: don't brake sharply at high speed - this can block the wheel and lead to a fall. Optimal technique: first smoothly use the electronic brake, then finish with a foot if necessary.

3.Mi Home mobile application: settings and capabilities

The Mi Home app not only allows you to track battery power, but also to adjust the key parameters of the scooter. Once connected (via Bluetooth), you will be able to:

Please note the Security section in the app. You can include:

• 🔒 Children's mode (speed limit to 10 km / h).
• 🚨 Fall warning (scooter vibrates when tilted sharply).
• 📍 Location tracking (useful for theft).

In 2026 models (such as Xiaomi Electric Scooter 4 Ultra), the Adaptive Light feature is introduced, which automatically adjusts the brightness depending on the lighting, and can be enabled in the app settings.

💡

If the scooter does not connect to the Mi Home, try resetting the Bluetooth settings: turn off the scooter, hold the power button for 10 seconds, then turn it on again.

4. Battery: How to extend the service life

Xiaomi scooters have a lithium-ion battery life of 300 to 500 charge cycles, but if used improperly, that time is halved.

Charging:

• ⚡ Do not leave the scooter on charging for more than 12 hours - this leads to overheating.
• 🔌 Use only the original charger (voltage) 42V, current 1.7A).
• 🌡️ Charge at a temperature of 10–25°C. In the cold, the battery loses up to 30% of capacity.

Storage:

• 📉 If you do not use a scooter for more than a month, discharge the battery to 40-60% and store it in a cool place.
• 🔄 Once every 3 months, fully discharge and recharge the battery for calibration.

⚠️ Warning: If a scooter suddenly loses power or turns off when charged above 20%, this is a sign of battery degradation.

5 Maintenance: What You Can Do on Your Own

Regular care extends the life of the scooter and makes travel safer, and here is the minimum checklist for each month:

Cleaning and lubrication:

• 🧹 Use wet fabric without abrasives to clean the case. Avoid direct water ingress on electronics.
• 🛢️ Lubricate wheel bearings every 3-6 months (depending on the intensity of use).

Diagnosis of malfunctions:

• 🔊 Scream in the wheel - a sign of bearing wear or sand hitting.
• 🚲 Vibration at speed – check the wheel balance or tire pressure.
• ⚡ The scooter is not turned on - perhaps the protection against overheating worked (wait 10-15 minutes).

6.Safety rules and legal nuances

In Russia, electric scooters are equated to personal mobility (SIM) and are subject to traffic rules. Here are the key points (relevant to 2026):

Where to go:

• 🚲 Cycling tracks (priority option).
• 🛣️ Right side (if there is no bike lane and speed of the scooter) ≤ 25 km/h).
• 🚶 Sidewalks – prohibited (final up to 1500) ₽).

Mandatory requirements:

• 💡 Headlamp or white reflector in front, red in rear.
• 🛎️ Audible signal (built-in or separate).
• 👮 Speed not exceeding 25 km/h (in some regions - 20 km/h).

⚠️ Note: Since 2023 in Moscow and St. Petersburg there is a rule of mandatory registration of scooters with a capacity of more than 250 W. For Xiaomi Pro 2 (600 W) will require registration in the traffic police.

💡

Riding on the carriageway is allowed only if your scooter reaches a speed of > 25 km / h and is equipped with a license plate (like a moped).

7. Frequent Beginner Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes that shorten the life of the scooter or lead to accidents.-5 slip-up:

1. Ignoring the run-in. Avoid top speed and heavy braking for the first 100 km, which helps you get used to the mechanical parts.
2. Driving in puddles. Water gets into bearings and electronics, causing corrosion. If you can't avoid puddles, dry the scooter for 2-3 hours.
3. Storage on the balcony in winter, frost below -10°C damages the battery, and keep the scooter in the hallway or storage room.
4. Use of non-original parts: Cheap tires or brake pads wear out 2-3 times faster.
5. Even at 15 km/h, a fall can cause serious injury.

Another common problem is the unbalanced wheels after the tire has been replaced. If you feel vibration on the steering wheel, check:

• 🔄 Correct installation of the wheel (nuts must be tightened cross-cross).
• ⚖️ Balancing by cargoes (in the service it is worth it) ~300 ₽).

FAQ: Answers to popular questions