Xiaomi Wireless Headphones: A Complete Guide to Connecting and Managing from Your Phone

Xiaomi’s wireless headphones are not just an accessory, but a complete tool for listening to music, calling and working with voice assistants. The brand’s lineup features models from the budget Redmi Buds to the premium Xiaomi FlipBuds Pro, each with unique features: active noise cancellation, low latency for games or long battery life. However, even the most advanced devices require the right setup, especially if you use them with a phone from the same manufacturer.

Synchronize headphones Xiaomi with the phone Xiaomi, Redmi or POCO opens access to additional features: fast parking, automatic audio settings through the MIUI But many users have difficulty in the first connection stage: headphones are not detected, the sound is interrupted or the battery quickly goes down. In this article, we will analyze all the nuances - from basic pairing to fine-tuning the sound profile and solving typical problems.

Particular attention will be paid to models with Bluetooth support 5.2/5.3 (For example, Xiaomi Buds 4 Pro or Redmi Buds 5 Pro), as they require specific settings to work with functions such as LDAC (codec for high-quality audio, or dual connection to two devices at the same time. MIUI 14+, You can also use control gestures directly from the system menu – we will talk about this separately.

1. Preparation of headphones and phone for the first connection

Before pairing, make sure both devices are ready to go. Xiaomi headphones usually come in standby mode, but you need to put them into the pairing mode for the first time.

For most models, the algorithm is the same:

1. Take the headphones out of the case (they should turn on automatically).
2. Press the touchpad on both headphones simultaneously for 5-7 seconds until the indicator starts flashing white and red (or only white for new models).
3. On your phone, activate Bluetooth via the notification panel or in Settings → Connections → Bluetooth.

If the headphone indicator does not respond, check the charge of the case: at a level below 10%, they may not turn on. For models with a button on the case (for example, Xiaomi Buds). 3T Pro) hold it for 3 seconds to put the headphones in pairing mode.

💡

If the headphones have already been connected to another device, reset them: place them in a case, then press the touchpad for 10 seconds before flashing double red.

On the Xiaomi phone, it is recommended to:

• 📱 Update MIUI Up to the latest version (in Settings) → The phone. → Updating the system).
• 🔄 Reboot your phone if you have previously had Bluetooth problems.
• 🎧 Remove old devices with the same name from your phone memory (for example, "Mi True Wireless Earphones").

2. Step-by-step phone connection Xiaomi/Redmi/POCO

The pairing process takes no more than a minute, but there are nuances for different versions. MIUI. Let’s take a look at a universal algorithm:

Step 1. Open the Settings. → Bluetooth on your phone and make sure the slider is active. Headphones should show up in the list of available devices called your model (e.g., "Redmi Buds 4 Active").

Step 2. Click on the headphone name in the list. If you request a code confirmation (usually 0000 or 1234), type it. For fast-connected models (such as Xiaomi Buds 4), no code is required.

Step 3. Once paired successfully, a notification will appear on the screen, and the headphones will be marked as "Connected" in the list of devices. Some phone models (such as the Xiaomi 13 Pro) will also display the charge level of the headphones and case.

Headphones appear in the Bluetooth list|The indicator on the headphones is lit blue / green|The sound is played without delay|In the notification panel appeared widget management-->

If the headphones don't connect, try:

• 🔌 Remove and re-insert the headphones into the case, then repeat the pairing.
• 📴 Disable Bluetooth on other devices nearby (laptop, tablet).
• 🔄 Reboot the case: Remove the headphones and press the reset button (if any) or leave the case to discharge for 10 minutes.

Redmi Buds 3/4 Lite|Xiaomi Buds 4/4 Pro|Xiaomi FlipBuds Pro|Redmi Buds 5/5 Pro|Another model-->

3. Sound and control settings through MIUI and Mi Earphones.

Once connected, Xiaomi headphones automatically integrate into the ecosystem. MIUI, This gives you access to additional features, like on phones with a MIUI 13+ in the notification panel appears widget to control playback and switching noise reduction modes.

For a deep setup, download the official Mi Earphones app from Google Play (or AppGallery for models without Google services).

• 🎛️ Equalizer with preset profiles (bass, vocals, classics) or manual adjustment.
• 🔇 Noise reduction modes (ANC) Transparency for models with support (for example, Xiaomi Buds 4 Pro).
• 👆 Customization of gestures: double touch, hold, swipe up/down.
• 🔋 Monitoring the battery of each headphone and case in real time.

The Mi Earphones app also allows you to update your headphone firmware (if an update is available) or reset to factory settings.Please note: Redmi Buds models may require a separate Redmi Earphones app.

Customization of gestures (example for Xiaomi Buds 4 Pro):

Important: For models with support LDAC (For example, Xiaomi Buds 4 Pro in the Bluetooth settings of the phone you need to manually select a priority codec, otherwise the sound will be transmitted through the Bluetooth phone. SBC inferiorly.

4.Sound optimization for music, calls and games

Xiaomi’s wireless headphones support different Bluetooth codecs that affect sound quality and latency. Here’s how to choose the best settings for different scenarios:

For music:

• 🎵 Select the codec. AAC (balance of quality and stability; or LDAC (Maximum quality, but more battery consumption).
• 📊 In the Mi Earphones app, activate the Low-Frequency Equalizer for bass or Vocal for vocals.
• 🔊 Turn off noise cancellation (ANC), If you listen to music in a quiet environment, it will reduce the load on the headphone processor.

For calls:

• 📞 Use the mSBC codec or CVSD (voice-optimized).
• 🎤 Turn on the "Transparency" mode to better hear the interlocutor in a noisy place.
• 🔇 Activate the Voice Amplification feature in the app settings (available for Xiaomi Buds) 3/4 Pro).

For games:

• 🎮 Switch to aptX Low Latency codec (if supported) or AAC minimally buffered.
• 🕹️ Enable "Game Mode" in the Mi Earphones app (reduces latency to 80-100 ms).
• 🔋 Turn it off. ANC — This will reduce the delay by 10-15 ms.

💡

For minimal delays in games, use headphones with Bluetooth support 5.2+ aptX codec LL. On Xiaomi phones with Snapdragon chipset 8 Gen 1/2 delay may be lower 60 miss.

If the sound is interrupted or distorted, try:

⚠️ Note: On Xiaomi phones with MIUI 12 and below, you may have a codec conflict. To fix this, go to Settings. → Developer → Bluetooth audio settings and manually select AAC car.

5. Resolving common problems

Even with the right settings, users face typical problems, and let's look at the most common ways to solve them:

Problem 1: The headphones are plugged in, but there is no sound.

• 🔈 Check the volume level on your phone and headphones (sometimes they are adjusted separately).
• 🎧 Make sure the headphones are selected as the playback device in Settings → Sound. → Output device.
• 🔄 Reconnect the headphones: remove them from the Bluetooth list and pair again.

Problem 2: The battery is rapidly draining.

• 🔋 Turn it off. ANC, If you don’t need it, it reduces your work time by 20-30%.
• 📵 Reduce the volume: at the maximum level, the headphones will discharge in 3-4 hours.
• 🔄 Update the firmware of headphones through the Mi Earphones app.

Problem 3: Sound delays in video or games.

• 🎮 Turn on "Game mode" in the headphone settings.
• 📱 Switch the codec to aptX LL or AAC (In Bluetooth settings → Additionally).
• 🔄 Restart your phone and headphones.

Problem 4: The headphones are not synchronized with each other.

⚠️ Attention: If one earphone is working and the other is silent, place both in a case for 10 seconds, then pull out and hold the button on the case (if any) until double blinking. For models without a button, use reset via the Mi Earphones app.

If the problem persists, check:

• 📦 Cleanliness of contacts in the case (mud can interfere with charging one of the headphones).
• 🔋 Charge level of the case – at a discharge below 20%, the headphones may not synchronize.

6 Additional functions: dual connection, voice assistant and others

Xiaomi’s current models support features that many users don’t even know they have.

Dual connection (Multipoint):

Xiaomi Buds 4 Pro and later headphones can connect to two devices at the same time (for example, a phone and a laptop).

1. Connect the headphones to the first device.
2. Activate the pairing mode (hold the touchpad for 5 seconds).
3. Connect to the second device via Bluetooth.

Now, headphones will automatically switch between devices based on activity (for example, when playing music or calling).

Voice assistant:

On Xiaomi phones, you can configure a Google Assistant or XiaoAI call through gestures:

• 🗣️ In the Mi Earphones app, assign a double/triple touch to call the assistant.
• 📱 On the phone, allow access to the microphone for the assistant app.

Automatic pause when removing the headphone:

Wear Detection is available in most models, to enable it:

1. Open Mi Earphones.
2. Go to Settings. → Additionally. → Autopause.
3. Activate the slider.

Setting up ANC (noise-canceling):

In headphones Xiaomi Buds 4 Pro and FlipBuds Pro have 3 modes ANC:

• 🔇 Maximum - for planes and subways.
• 🔈 Balanced - for the office.
• 🌿 Transparency – for conversations without removing headphones.

Switch between modes can be through an application or gesture (touch panel retention).

7. Care and extension tips

To make Xiaomi headphones last longer, follow simple recommendations:

• 🧼 Clean your headphones and case with a dry soft brush 1 time per week. Use a cotton swab soaked in alcohol to remove earwax (do not drip the liquid directly into the speaker!).
• 💧 Avoid getting moisture, even if the model has protection. IP54/IPX4. After rain or training, dry your headphones. 1–2 squirt.
• 🔋 Don't keep your headphones discharged, which reduces battery life. Optimal charge level for storage: 40-60%.
• 🌡️ Do not leave your headphones in the sun or near heat sources (such as on a torpedo in a car).

For the case:

• 🔌 Use only the original charging cable (especially for models with wireless charging).
• 🔋 Do not allow full discharge of the case - recharge it at the level of 20-30%.

If the headphones stopped holding the charge:

⚠️ Attention: Battery in TWS-If the charging time is reduced to 1-2 hours, try the "calibration": 1. Fully discharge the headphones and case. 2. Charge to 100% without interruption. 3. Repeat 2-3 times. If this does not help, the battery needs to be replaced (at the service center).

FAQ: Frequent questions about Xiaomi wireless headphones