Xiaomi irrigators are not just gadgets for oral hygiene, but real assistants in the fight against plaque, bleeding gums and unpleasant odor. W10 up to powerful stationary Soocare X3, But many users are faced with questions like how to adjust the pressure, what the nozzles are for, and how to avoid the typical mistakes of the first use.
In this article, we will analyze the step-by-step instructions for the operation of Xiaomi irrigators, including preparing the device for operation, choosing modes for different tasks (brace cleaning, gum massage, implant care), as well as the nuances of care for the device itself, and pay special attention to common myths - for example, whether it is possible to use ordinary tap water or why you should not turn on maximum power from the first day.
If youβve just purchased an irrigator or have been using it for a while but want to optimize the process, this article will help you understand the intricacies. For those who still choose a model, weβve added a comparison table of key characteristics of popular Xiaomi devices.
1. Preparation of Xiaomi irrigator for the first use
Before you first turn on, the device must be properly assembled and prepared. Start with unpacking: complete with an irrigator, Xiaomi usually go:
- π Main unit (with water tank or removable tank)
- π§ 2-4 nozzles (standard, for braces, periodontal, etc.)
- π Charger (for portable models) or network adapter (for stationary models)
- π Instructions in Chinese/English (often without Russian translation)
First, flush the tank and nozzles with warm water and soap, which will remove any possible industrial contamination.
Rinse the tank and nozzles|Charge the battery (for portable models)|Set the nozzle before clicking.|Fill the tank with filtered water (not from the tap!)|Select the minimum power mode-->
Pay special attention to the installation of the nozzle: it should be fixed with a characteristic click. If the nozzle sits loosely, water will leak during operation, and pressure will be lost. W10 Soocare X3 squirts are attached differently:
- π Oclean W10: counterclockwise.
- π Soocare X3: Clicking with subsequent rotation (QuickLock system).
Portable irrigators (Oclean) W10, Mi Portables require pre-charge, full charge time is 4 to 8 hours (depending on model) and it is forbidden to use the device while charging, which can cause the battery to overheat. X3) connect directly to the network.
2. How to fill the tank: water, rinses and other liquids
The quality of the liquid not only determines the efficiency of cleaning, but also the life of the irrigator.
- π§ Filtered or boiled water (optimum option).
- π§΄ Special rinses for irrigators (e.g. Oclean Mouthwash).
- πΏ Decoctions of herbs (chamomile, sage) - but only in diluted form (1: 1 with water).
What can not be put in the irrigator:
- β Water from the tap (due to chlorine and salts, a raid is formed on the internal parts).
- β Alcoholic solutions (corroding seals).
- β Carbonated drinks or juices (lead to a breakdown of the pump).
Filtered water|Irrigator rinse|Decoction of herbs|Water from the tap|Other-->
The temperature of the liquid should be room temperature (20-35).Β°C) Hot water can deform plastic parts, cold water can cause discomfort when used:
| Model | Volume of reservoir (ml) | Operating time at 1 gas station |
|---|---|---|
| Oclean W10 | 200 | 45-60 sec. |
| Soocare X3 | 600 | 90-120 secs |
| Mi Portable | 150 | 30-40 sec. |
β οΈ Warning: If you use a rinse, dilute it with water in a 1:1 ratio. Concentrated solutions can damage the sealing rings and shorten the life of the nozzles.
3. Modes of work: which to choose for your tasks
Xiaomi irrigators are equipped with several modes of operation, which differ in jet pressure and pulse frequency.
- π Normal β Universal mode for daily cleaning (pressure 50-70) PSI).
- π©Ί Soft β for sensitive gums or first use (30β50) PSI).
- π¦· Pulse β massage of gums and braces cleaning (cyclic pressure 60β90) PSI).
- πͺ Strong (Intensive) - to remove the old plaque (90-120) PSI).
Which regime to choose?
- πΉ Beginners: Start with Soft for 1-2 weeks to make your gums adapt.
- πΉ For braces/implants: Pulse with nozzle for orthodontic structures.
- πΉ With periodontitis: Normal with periodontal nozzle (jet at an angle of 90)Β° gum-to-mum).
Soocare models X3 olean W10 Pro has an additional Custom mode (manual pressure setting:
- Hold the power button for 3 seconds.
- With short presses, select the pressure level (the display will display the current value in the PSI).
- Confirm the choice with a long press.
π‘
If you feel pain while using Strong mode, switch to Soft immediately and rinse your mouth.High pressure can injure your gums when the angle of the nozzle is wrong.
4. Technique of use: how to hold the nozzle and treat the teeth
The efficiency of an irrigator is 70 percent dependent on the right technique.
- Body tilt: lean over the sink 45-60Β° (So that the water drains away without getting into the airways).
- Position of the nozzle: keep it at an angle of 60-90Β° For interdental spaces, 45.Β°.
- Distance: The nozzle should touch the tooth or gum, but without pressing.
- Motion: Treat each tooth for 2-3 seconds, moving from the gums to the crown.
Typical errors:
- β Hold the nozzle perpendicular to the gum (leads to bleeding).
- β Only the front of the teeth (plaque accumulates from the inside!).
- β Use an irrigator instead of a toothbrush (it complements, not replaces, cleaning).
For the treatment of braces and implants, use special nozzles:
- π¦· Orthodontic nozzle (with a thin tip) - for cleaning under the arc of braces.
- π Periodontal nozzle (with rubber tip) - for massage of gums around implants.
β οΈ Warning: Do not direct the jet directly into the tonsils or throat - this can provoke a gag reflex.
5. Care of irrigator: how to extend the service life
Xiaomiβs irrigator will last longer if you follow the simple rules of care:
Wash the tank with acetic solution (1: 1 with water)|Drying nozzles in the open air|Clean the filter (for stationary models)|Check the sealing rings for wear-->
Once a month, you should do a deep cleaning:
- Pour a solution of water and vinegar (1: 1) into the tank.
- Turn on the irrigator for 30 seconds in Strong mode.
- Wash the tank and nozzles with running water.
For models with removable battery (Oclean) W10):
- π Once every 3 months remove the battery and wipe the contacts with an alcohol napkin.
- π Store the device with a charge of 40-60% (full discharge or 100% charge reduces battery life).
If the irrigator has stopped turning on or makes uncharacteristic sounds, check:
- π Charging (for portable models).
- π§ Filter (in stationary models - can be clogged with a raid).
- π The rings are stained with water (the water is stained).
What to do if the irrigator is not turned on?
6. Model comparison: which Xiaomi irrigator to choose
Xiaomi offers irrigators in three categories: portable, stationary and smart (with an app connection).
| Model | Type | Pressure (PSI) | Volume of tank (ml) | Autonomy | Features |
|---|---|---|---|---|---|
| Oclean W10 | Portable | 30β120 | 200 | 14 days | Wireless charging, 4 modes, IPX7 |
| Soocare X3 | Stationary | 20β150 | 600 | Networked | 10 nozzles in the kit, water temperature adjustment |
| Mi Portable | Portable | 30β100 | 150 | 7 days | Compact, suitable for travel |
| Oclean W10 Pro | Portable | 40β140 | 220 | 20 days | Display, 5 modes, compatibility with the application |
Which irrigator to choose?
- π For the home: Soocare X3 (big tank, big pump).
- π Travel: Mi Portable or Oclean W10 (compact, battery-powered).
- π± For gadget lovers: Oclean W10 Pro (control from a smartphone, cleaning statistics).
π‘
Stationary irrigators (Soocare) X3) Suitable for family use, and portable (Oclean) W10) β The latter are inferior in power, but they benefit in mobility.
7. Frequent problems and their solution
Even with proper operation, there can be problems.
Problem 1: The irrigator turns on, but the water doesn't come in.
- πΉ Check if the sleeve is tightly installed.
- πΉ Make sure there is water in the tank (the level sensor may not work properly).
- πΉ Clean the filter (in stationary models).
Problem 2: Weak pressure at full charge.
- πΉ Maybe the holes of the nozzle clogged - wash it under a stream of water.
- πΉ Check the mode (Soft can be activated).
- πΉ If the problem persists, the pump is faulty (repair required).
Problem 3: The irrigator is rapidly discharged.
- πΉ The battery of portable models loses capacity in 2-3 years. Try to "rock" it: completely discharge, then charge for 12 hours.
- πΉ Use the original charger (non-original chargers may be undercharged).
β οΈ Warning: If the irrigator starts leaking or squeezing after a fall, immediately disconnect it from the mains.