Xiaomi Wireless Headphones: How to Connect, Configure and Use 100%

Xiaomi’s wireless headphones have gained popularity with a combination of affordable prices, high-quality sound and advanced features. However, even such devices have nuances in use that the manufacturer does not always talk about in the manual. This article will help you understand all the subtleties from the first connection to the hidden features that make listening to music more comfortable.

We'll look at not only the basic operations, but also the advanced settings that are available through the Mi Home or Xiaomi Earbuds app, and we'll also look at the typical problems that users face and give specific solutions. Whether you have a Redmi AirDots for 1,500 rubles or a flagship Xiaomi Buds 4 Pro, there's useful information for all models.

1.The first connection: how to sync headphones with the phone

The pairing process for all Xiaomi wireless headphones is almost the same, but there are nuances depending on the model. For example, AirDots 3 Pro supports fast connection via the phone. NFC, Redmi Buds 4 requires manual search in Bluetooth settings.

The general algorithm is this:

• 🔋 Take the headphones out of the case - they should automatically turn on. If not, press and hold the button on the case (from Buds). 3T Pro is a touchpad).
• 📱 Open Bluetooth settings on your smartphone. On Android, path: Settings → Connected devices → New device.
• 🔍 In the list of available devices, find the name of your model (e.g. Mi True Wireless Earphones 2.
• 🎧 Confirm the connection if you request it. Some models (for example, Buds 4 Pro) will require you to install a proprietary application for full functionality.

If the headphones are not determined, check:

• 🔄 Reboot the phone’s Bluetooth module (turn it off/on in settings).
• 🔋 Make sure the headphones are charged (the indicator on the case should be white or green).
• 📦 Try to reset the headphones to factory settings (the method is described in the section about resetting).

💡

On the iPhone, Xiaomi headphones connect the same way, but without support for branded features (such as gestures or equalizer).

2.Gestural control: which commands the headphones support

All modern Xiaomi models are equipped with touch panels, but the set of gestures is different. For example, Redmi Buds 4 Lite can only turn on / off playback and receive calls, and Buds 4 Pro recognize double and triple touch, hold and even swipes.

Here are the standard gestures for most models:

To change the purpose of the gestures:

1. Open the Xiaomi Earbuds app (you can download it from Google Play or AppGallery).
2. Select your headphone model from the top menu.
3. Go to the Touch Management section.
4. Assign each gesture the desired function (for example, you can swap “next track” and “previous track”).

The Xiaomi Buds 4 Pro headphones have a unique feature called Adaptive Noise Reduction, which automatically adjusts the noise suppression level depending on the environment (for example, in the subway or on the street), which is enabled in the company’s application and requires the latest firmware version.

3. Sound tuning: equalizer, noise cancellation and spatial sound

Xiaomi headphones use a neutral sound profile by default, but you can change it to your preferences.

1. Open the Xiaomi Earbuds app.
2. Go to the section Sound Effects.
3. Select one of the pre-set profiles: 🎵 Balance – Neutral settings (recommended for most genres). 🎸 Bass.+ — Higher frequency low frequencies (for hip-hop, electronic music). 🎻 Clarity – High and medium frequencies (for classics, vocals). 🎧 Custom – manual equalizer setting.

Models with active noise reduction support (ANC) There are additional options:

• 🔇 ANC — Complete suppression of ambient noise (useful in transport).
• 👂 Transparent mode - skips external sounds (need for conversations without removing headphones).
• 🎧 Adaptive mode – automatically adjusts to noise level (available only on Buds 4 Pro and later).

Set the "Transparent Sound" mode"|Turn it off. ANC (he can interfere)|Activate the “Voice Improvement” function in the settings|Check the microphones for dirt.-->

For models with spatial sound support (e.g. Xiaomi Buds 4 Pro):

1. Enable the option in the app: Settings → Spatial sound → Turn on.
2. Select a mode: 🎬 Cinema - for watching movies (the effect of surround sound). 🎮 Games – for better localization of sounds in shooters. 🎵 Music - Extended sound scene for tracks.

⚠️ Attention: Spatial audio only works with supported apps (e.g. YouTube Premium, Netflix, Tidal.

4 Problems and Solutions: What to Do When Headphones Don't Work

Even high-quality Xiaomi headphones sometimes fail, and here are the most common problems and specific ways to solve them:

Problem 1: The headphones don't connect to the phone.

• 🔌 Check the charge of the case and headphones (the indicator should burn when opening the lid).
• 🔄 Reboot Bluetooth on your phone: Turn it off for 10 seconds, then turn it on again.
• 🗑️ Remove the headphones from the list of associated devices and connect again.
• 🔧 Reset the headphones to factory settings (see instructions below).

Problem 2: The sound is interrupted or jammed.

• 📶 Make sure there are no obstacles between the phone and the headphones (walls, metal objects).
• 🔋 Check the charge of the headphones – with a low battery level, communication can deteriorate.
• 📱 Close background apps that can use Bluetooth (such as fitness trackers).
• 🔄 Switch the Bluetooth codec in the developer settings (optimum option — AAC or).

Problem 3: The microphone is not working during the call.

• 🎤 Check if the microphone holes are contaminated (clean with a soft brush).
• 🔇 Turn off noise cancellation (ANC) — It can suppress your voice.
• 📞 Try using headphones with another device (like a laptop) to rule out a smartphone problem.
• 🔄 Update the firmware of headphones through the Xiaomi Earbuds app.

💡

If Xiaomi headphones are not defined by any device, there is likely a firmware failure, in which case only a factory reset will help (see next section).

5. Reset to factory settings: when and how to do

Reset is required in three cases:

1. The headphones do not connect to any device.
2. One of the headphones does not work (for example, does not play sound).
3. You want to sell or transfer the headphones to another person.

Resetting instructions (relevant for most models):

1. Put both headphones in the case and close the lid.
2. Open the lid and hold the button on the case (or touchpad on Buds). 4 Pro) during 10-15 seconds.
3. The indicator on the case will start flashing red and white - this is a signal for a reset.
4. Once reset, the headphones will automatically turn off, and now you can reconnect them.

For AirDots 3 Pro and Buds models 3T Pro process a little different:

1. Get the headphones out of the case.


2. Press and hold the touch panels on both headphones at the same time.




3. After 5 seconds, the indicators will start flashing purple - let go.




4. Headphones will drop and reboot.

⚠️ Warning: After resetting, all user settings (gestures, equalizer, device binding) will be deleted. You will have to reset the headphones through the app.

6.Firmware Update: Why It Matters and How to Do It

Xiaomi's headphone firmware is responsible for the stability of communication, sound quality and additional functions. 3-6 months and correct:

• 🔊 Bugs with sound (for example, crackling in the microphone).
• 🔋 Problems with autonomy (improved working time).
• 🎛️ Add new features (e.g., spatial sound support).

To update the firmware:

1. Install the latest version of the Xiaomi Earbuds app.
2. Put the headphones on the phone.
3. Open the application and go to the Settings → Firmware Update.
4. If a new version is available, click Update and wait until it is completed (don’t turn off the headphones!).

Important nuances:

• 🔋 Make sure the headphones are charged >50%, otherwise the update may be interrupted.
• 📶 Connect your phone to Wi-Fi – the firmware weighs ~10-30 MB.
• ⏳ If the headphones are stuck in the upgrade phase, wait 10 minutes. If nothing has changed, reset (see previous section).

7. How to prolong the life of headphones: care and storage

The life of Xiaomi wireless headphones depends not only on the build quality, but also on the correct use. Here are specific recommendations to help avoid breakdowns:

Caring for the body and speakers:

• 🧼 Wipe your headphones and case with a dry soft cloth (do not use alcohol or wet wipes - they can damage the coating).
• 🎵 To clean the speakers, use a soft brush (such as a toothbrush) or sticky tape to remove dust.
• 🚫 Don’t blow into microphones or speakers – this can damage the membrane.

Charging and battery:

• 🔌 Use only the original cable or certified cable. USB-C/Lightning (case-model).
• 🔋 Don’t leave your headphones on charging any more. 2-3 hours after full charge.
• 🌡️ Avoid overheating – do not charge the case in direct sunlight or near heat sources.

Storage:

• 📦 Always put your headphones in your case when not in use, which protects them from dust and mechanical damage.
• 🧲 Keep headphones away from magnets (such as magnetic-mounted phone cases).
• 🌧️ Do not leave headphones in wet areas (bathroom, swimming pool), even if they have protection. IPX4.

⚠️ Note: If Xiaomi headphones have stopped holding charge (for example, instead of using the device) 5 work-hours 1-2), This is a sign of battery wear, and in this case, only replacing the battery at the service center will help, because self-repair can damage the board.

8 Hidden Features: What Xiaomi Headphones Can Do That You Didn't Know About

In addition to the standard features, Xiaomi headphones have several hidden chips that are not described in the instructions:

1. Quick connection to multiple devices

The Buds 4 Pro and later headphones support multipoint, which is a simultaneous connection to two devices (like a phone and a laptop) to activate:

1. Connect the headphones to the first device.
2. Open Xiaomi Earbuds and go to Settings → Multi-point.
3. Turn on the option and connect the second device via Bluetooth.

2. Voice notifications in Russian

AirDots 3 Pro and above models can voice:

• 🔋 Charge level of headphones and case.
• 📞 Name of the subscriber when the call is in (if the contact is saved in the phone).>
• 🎵 Name of the track being reproduced (in some firmwares).

To include:

Open Xiaomi Earbuds → Settings → Voice prompts → Select “Russian”

3. "Low Latency" mode

To reduce the latency of sound in games (relevant to the PUBG Mobile, Call of Duty, etc.):

1. Open Xiaomi Earbuds.
2. Go to Settings. → Mode for games.
3. Activate the option - the sound delay will decrease with ~200 ms to ~80 ms.

4. Set up automatic shutdown

If the headphones lie still for more than 5 minutes, they automatically turn off to save charge.

Xiaomi Earbuds → Settings → Auto-Switch → Select 5/10/15 minutes or “Switch off”

💡

The function "Mode for games" increases the battery consumption ~10-15%. Use it only when necessary.

FAQ: Answers to Frequent Questions