How to use Xiaomi Redmi Airdots wireless headphones: from connectivity to fine-tuning

Why are Redmi Airdots still popular?

Xiaomi Redmi Airdots wireless headphones (including Redmi Airdots models) 2/3/Pro) For several years, they have held leading positions among budgets. TWS-Headsets: Their combination of price, sound quality and battery life (before) 4 single-charged + 12 The case clock makes the device a versatile choice for music, calls and podcasts. However, many users face difficulties when connecting for the first time or are unaware of hidden features - such as how to activate low latency for games or switch between devices.

In this article, you will find unique instructions for managing Redmi Airdots through touch panels, how to reset headphones when crashes, and a compatibility table with different versions of MIUI/Android. We will also analyze common errors (for example, when one earphone does not connect) and give recommendations for extending battery life. If you have just unpacked your headphones or want to unleash their potential 100%, read on.

The package and appearance: what should be in the box?

Before using it, check the completeness. In the standard packaging of Xiaomi Redmi Airdots (any version) must be present:

• 🎧 Two wireless headphones (right and left, marked R and L).
• 🔋 Charging case with charge level indicator (4 LEDs).
• 🔌 Cable USB Type-C (newer versions) or Micro-USB (older versions).
• 📄 Short instructions in several languages (including Russian).
• 🔄 Additional ambushes (in Pro models or SE).

Pay attention to the indicators of the state:

• 🔴 Red – Low charge (less than 20%).
• 🟢 Green: Charge above 50%.
• 🔵 Blue (Blinking) - mode of pairing.
• 🟣 Purple (in Airdots 3 Pro) – Game Mode activated.

⚠️ Warning: If the box is missing a cable or one of the headphones, do not try to connect the device - contact the seller for a replacement. Using non-original charging accessories can damage the headphone battery.

First connection to the smartphone: step-by-step instructions

The process of pairing Redmi Airdots with a phone takes no more than 30 seconds, but requires a precise algorithm.

1. Remove both earphones from the case. They will automatically turn on and start flashing white (ready to connect).
2. On your smartphone, activate Bluetooth: 📱 On Android: Settings → Connected devices → Bluetooth. 🍎 On iPhone: Settings → Bluetooth.

In the list of available devices, find Redmi AirDots_R (Right earphone, main headphone. Press it.

Confirm the pairing. Once successfully connected, the left earpiece (Redmi) AirDots_L) plug in automatically.

If the headphones are not listed:

• 🔄 Reboot Bluetooth on your phone (turn off/on).
• 🔋 Check the charge of the case (the indicator should burn green when opened).
• 🧲 Reset your headphones (press the button on the case for 10 seconds until the indicator flashes red).

Headphone management: touch gestures and voice assistant

Redmi Airdots have touch panels on the outside of the case, and their functionality depends on the model and the firmware version. Below is the table of basic gestures for Airdots 2/3:

To activate the game mode (reduced sound latency to 88 ms in Airdots 3 Pro):

1. Open the Mi Home or Xiaomi Wear app.
2. Select headphones in the list of devices.
3. Go to Settings → Sound Mode → Game Mode.

⚠️ Attention: Redmi Airdots touch panels respond to touch, not to press. Don't press the body -- just a little finger touch is enough. Excessive pressure can damage the microphone.

💡

If the headphones do not respond to touch, wipe the touch panels with an alcohol solution (at least 70% alcohol), and dust and fat from the skin can block the operation.

Problems and Solutions: What to Do When Your Headphones Are Not Working?

Even reliable devices fail. Here's the top.-5 Redmi Airdots and how to fix them:

• 🔊 No sound in one earphone: Check if the speaker is dirty (use a toothpick with cotton wool). Reset the headphones (see section below). In Bluetooth settings on the phone, turn off high-quality audio (AAC/aptX).
• 🔋 Headphones discharge quickly: Reasons for fast discharge Old battery (lifetime) ~300 charge-cycle)|Permanent Bluetooth connection in the background|Use in cold (below) -10°C reduces capacity by 30%)|Play mode enabled (increases power consumption) Turn off Bluetooth headphones when not in use. Store in a case (it automatically turns off power). Update your firmware via Mi Home.
• 🎵 The sound is interrupted or jammed: Make sure the distance to the phone is less than 10 meters. Turn off other Bluetooth devices (fitness bracelets, smart watches). Switch the codec in the Bluetooth settings to SBC (More stable, but with less quality).

If the headphones are not determined by the phone:

1. Remove them from the list of associated devices.
2. Reset the case settings (press the button for 15 seconds until the indicator goes out and again flashes blue).
3. Connect again, starting with the right earpiece.

💡

In 90% of cases, connection problems are solved by resetting headphones and rebooting the Bluetooth module on the phone.

Resetting to factory settings: when is it needed?

A Redmi Airdots reset is required in the following situations:

• The headphones only connect one at a time.
• The sound is delayed (>200 ms).
• Indicators burn incorrectly (for example, red at full charge).
• The device does not respond to sensor commands.

Resetting instructions:

1. Put both headphones in the case and close the lid.
2. Connect the case to the charger (the indicator should burn red).
3. Press the button on the case for 20 seconds until the indicator starts flashing red and blue.
4. Remove the headphones - they will automatically go into pairing mode.

After discharge:

• 🔄 Headphones will lose all saved connections.
• 🔊 Factory gesture settings will return.
• 📱 You will need to reconnect them to the phone (see section above).

⚠️ Note: Do not reset more than 1 time a month - this can lead to wear and tear of flash memory of headphones and their failure.

Compatible with other devices: PC, Mac, Smart TV

Redmi Airdots supports connectivity not only to smartphones, but also to other gadgets.

• 💻 Windows 10/11: Open the settings. → Devices → Bluetooth. Press Add the device. → Bluetooth. Select Redmi. AirDots_R. For proper sound operation, install the codec AAC (device-like).

MacOS:

• Turn on Bluetooth in the menu bar.
• Select the headphones in the list and click Connect.
• Airdots 3 Pro firmware may require macOS to be upgraded to version 12.3+.
• 📺 Smart TV (Mi TV, Samsung, LG): Features of connection to TVs On Xiaomi TVs headphones are connected automatically through MIUI|Samsung requires you to disable the function "Auto-connection to the sound bar"|Nana LG The microphone may not work (firmware restriction) Go to Settings → Sound. → Sound output → Bluetooth devices. Select Redmi. AirDots_R. To sync audio and video, turn on Low Latency (if available).

When connecting to game consoles (PS5, Nintendo Switch):

• 🎮 PlayStation 5 doesn’t officially support Redmi Airdots, but you can use a Bluetooth adapter (e.g., the Redmi Airdots, 8BitDo).
• 🏠 Nintendo Switch requires firmware updates to version 13.0.0+ and manually pairing through settings → Bluetooth audio.

How to prolong the life of headphones: care and storage

The average service life of Redmi Airdots is 2-3 years when operated correctly.

• 🔋 Charging: Use only original cable or certified accessories. Do not leave your headphones on charge for more than 24 hours, which reduces battery capacity. Charge at a temperature of 10-35°C.
• 🧼 Clean: Clean the case and embushures with a wet wipe (no alcohol!). To clean the speakers, use a soft brush or compressed air. Don't immerse the headphones in water - they only have spray protection (IPX4).
• 📦 Storage: Keep your headphones in your case, which protects against dust and mechanical damage. Avoid direct sunlight (plastic can be deformed). If you don't use your headphones for more than a week, discharge them to 40% and turn them off.

Signs that headphones require maintenance:

• 🔊 The sound became quieter or wheezing appeared - check the speakers for clogging.
• 🔋 Case does not hold charge (less than 2 hours of headphones) - replace the battery case.
• 🎛️ Touch panels are triggered arbitrarily - reflashing is required.

💡

To restore battery capacity, run 3 full discharge/charging cycles (0% to 100%) in a row, which will help calibrate the power controller.

FAQ: Answers to Frequent Questions