Connecting Amazfit Pace to a smartphone: full instruction with tips for setting up

The Xiaomi Amazfit Pace (also known as the Huami Amazfit) remains a popular choice among fitness trackers for its autonomy, built-in GPS and stylish design. However, many users face difficulties when connecting a device to a phone for the first time — especially if it comes to older smartphones or custom firmware. In this article, we will discuss all possible ways of synchronizing, including solving typical problems that are not described in the official documentation.

It’s important to understand that the Amazfit Pace connection process is different from the settings of newer models (such as the Amazfit GTR or Bip U Pro), as these watches use unique software and communication protocol. We’ll look not only at basic synchronization through the Mi Fit app, but also at alternative methods for iOS device owners, as well as ways to bypass common bugs like “invisibility” of the watches in the list of available devices.

If you've just unpacked your watch or are trying to reconnect it after resetting, this guide will help you avoid hours of wasted time searching for solutions, and for those who have tried to sync Pace without success, we've prepared a unique checklist for diagnosing problems that you won't find in standard manuals.

1.Preparation for connection: what to do before synchronization

Before you start connecting, make sure your smartphone and watch meet the minimum requirements.Amazfit Pace is compatible with:

• 📱 Android 4.4+ (Bluetooth 4.0 support LE)
• 🍎 iOS 9.0+ (iPhone 5 and newer)
• 🔋 Battery charge of the watch is at least 50% (at low charge, synchronization may be interrupted)

Also check that your phone has power-saving modes disabled for Bluetooth and app background activity. These settings often block a stable connection to fitness trackers. On Android, you can do this in Settings → Battery → Power Saving Mode, and on iOS, in Settings → Bluetooth (must be enabled permanently).

⚠️ Note: If you use custom ROM (For example, LineageOS) or Chinese firmware on your smartphone, pre-installe the Gapps module for the correct operation of Google services. Without it, the Mi Fit application may not start.

Remember to update the firmware to the latest version through the official app. Outdated software often causes connection failures. To check the current firmware version on the Amazfit Pace, go to the Settings of the watch → About device → Software version.

2. Installation and configuration of the Mi Fit application

The official Amazfit Pace management app is Mi Fit (developed by Huami).

• 🤖 Google Play for Android)
• 🍏 App Store (for iOS)

After installation, follow the following steps:

1. Launch Mi Fit and register (you can use Xiaomi Account, Google or Facebook).
2. Click Profile → Add the device → Amazfit Pace.
3. Allow the app to access geodata, notifications, and fitness data (on iOS, it’s a must!).
4. Turn on Bluetooth on your phone and wait until the watch appears on the list of available devices.

⚠️ Note: On iOS, after you connect, you may need additional permission to background update data. Go to iPhone Settings → Mi Fit → Background update and enable the option.

If the Amazfit Pace doesn’t appear in the list of devices, try:

Reset the clock to factory settings (clamb the 10 sec button)|Reboot the phone|Turn off/enable Bluetooth|Remove and reinstall Mi Fit|Try to connect from another phone-->

3. Step-by-step synchronization instruction

When the watch and phone are ready, follow these steps:

1. Activate the pairing mode on the watch: Press and hold the physical button on the Amazfit Pace for 3 seconds until the Bluetooth icon appears on the screen.
2. In the Mi Fit app: select Amazfit Pace from the list and confirm the connection on the watch (click the tick on the screen).
3. Wait until the synchronization is complete: the process can take up to 5 minutes. Don't interrupt it even if the progress bar freezes by 90%.
4. Set up the basic settings: Once connected, the app will prompt you to specify your gender, weight, height, and activity target.

If synchronization is interrupted during the "Connection" step, check:

💡

If the clock is connected but the data is not synchronized (steps, pulse), try manually updating the firmware through the Settings of the clock → Software Update. Sometimes this solves data transfer problems.

4. Alternative ways of connecting (if Mi Fit does not work)

In some cases, the official app may not be suitable — for example, if you have root rights on your phone or an outdated version of Android.

Method 1: Amazfit Watch (for older firmware versions)

This app was developed specifically for Amazfit Pace and may run more stable on some devices. Download it from APKPure (Android only) and follow the instructions:

1. Install. APK-file (allow installation from unknown sources).
2. Start the Amazfit Watch and select the Pace model.
3. Follow the Connection Wizard (similar to Mi Fit, but with a simplified interface).

Method 2: Connecting with Notify & Fitness (for advanced users)

This app allows you to connect fitness trackers without official software.

• 📱 Devices without Google services (for example, on Huawei without Google services) GMS)
• 🔧 Custom phones ROM or modified Bluetooth stack

Download it to XDA Developers and select the Huami Amazfit profile in the settings.

⚠️ Note: When using third-party applications, certain features (such as notifications or other features) GPS-Tracking may not work properly. Test at your own risk.

5. Set up notifications and additional functions

After successful connection, it is recommended to configure:

• 📳 Notifications: in Mi Fit → Device profile → Notifications Select applications, alerts from which will be duplicated on the clock (SMS, Calls, messengers).
• 🏃 Sports Modes: Add Frequently Used Activity to Watch Settings → Sport.
• 🔋 Energy saving: Turn off unnecessary sensors (such as a constant pulse) if you want to extend your operating time.
• 🌍 Interface language: Chinese can be the default – change the Settings of the clock → Language.

For iPhone owners, additional settings are available in the Mi Fit → Amazfit Pace → Additional:

• Synchronization with Apple Health (steps, calories, sleep).
• Set up vibration for notifications.
• Selection of units of measurement (meters/feet, kg/pounds).

6. Solving common problems after connection

Even after successful synchronization, users experience failures, and here are the most common ones and ways to fix them:

Problem 1: The clock shuts down after a few minutes

Reason: The phone’s energy-saving mode kills Mi Fit’s background processes.

Decision:

• On Android: Add the app to the battery optimization exceptions (Settings → Battery → Battery Optimization → All Apps → Mi Fit → Not Optimizing).
• On iOS: Enable Background Update for Mi Fit in the app settings.

Problem 2: Sleep or footstep data is not synchronized

Reason: Conflict with other fitness apps (e.g. Google Fit or S Health)

Solution: Turn off automatic synchronization in third-party apps or perform manual synchronization in Mi Fit (pull the screen down in the main app menu).

Problem 3: The clock doesn't vibrate when notified

Reason: The clock settings have turned off vibration or the wrong intensity.

Solution: Go to Settings of the clock → Notifications → Vibration and select the level Strong or Medium.

💡

If none of these things worked, reset your clock completely (Settings → System → Reset) and reconnect from scratch, which solves synchronization problems in 90% of cases.

7. Update firmware and restore performance

Regular firmware updates fix bugs and add new features to update the Amazfit Pace:

1. Make sure your watch is charged 80% or more.
2. Connect to Wi-Fi (update via mobile Internet may be interrupted).
3. In the Mi Fit app, go to Profile → Amazfit Pace → Software Update.
4. If the update is not available, check out XDA Developers – they often lay out firmware for manual installation.

⚠️ Note: When you manually update your firmware through.bin files, use only official sources. Wrong firmware can turn your watch into a brick. Before you do it, back up your data via Mi Fit.

If the watch has stopped turning on or hung on the logo after the update:

• Connect them to charging and hold the 15-second button for forced reboot.
• If this does not help, reset through Mi Fit → Device → Reset.
• In extreme cases, use the Amazfit Tool (PC recovery software).

FAQ: Frequent questions about connecting Amazfit Pace