Xiaomi AirDots S connection: full instructions from A to Z

Xiaomi AirDots S wireless headphones (also known as Redmi AirDots S) remain among the most popular budget headphones. TWS-But many users have difficulty connecting first, especially when it comes to pairing with iOS devices or older versions of Android. In this article we will analyze not only the standard connection procedure, but also the nuances that the manufacturer is silent in the official instructions.

It’s important to understand that AirDots S supports Bluetooth 5.0, but their compatibility depends on the version of the headphone firmware and the smartphone operating system. For example, on the iPhone 6s or Android 7.0, you may have problems automatically determining the model in the list of available devices. We will tell you how to circumvent these restrictions and what to do if the headphones refuse to connect.

If you've just unpacked your headphones, don't rush to search for them in the Bluetooth menu right away. Make sure they're charged (the indicator on the case should burn white or orange), and then reset to factory settings, which will save 90% of potential problems.

Preparing headphones for the first connection

Before pairing the Xiaomi AirDots S with a phone, several mandatory steps must be taken, and neglecting them often leads to the fact that the headphones are not defined by the system or only connect in mono mode (one earphone works, the second does not).

First, check the charge level of the case and the headphones themselves.

• 🔋 Connect the case to the charger (use the cable) USB Type-C).
• 🔄 Wait until the indicator on the case lights up white (full charge) or orange (charged).
• 🎧 Get your headphones out of the case – if they are discharged, the indicators on them will be red.

Second, make sure the headphones are in pairing mode.

1. Place both headphones back in the case.
2. Close the case cover and wait 5 seconds.
3. Open the lid – the headphones should automatically turn on and go to search mode (the indicators will flash white and red alternately).

If the lights don't flash, the headphones have already been paired with another device, which will require a reset (instructions in the next section). Also note that AirDots S does not support simultaneous connection to two devices - before pairing with a new phone, you need to "forget" them on the previous one.

Reset Xiaomi AirDots S before factory settings

Resetting headphones is the only way to resolve connectivity issues if they have previously been paired with another device or are not working properly (e.g. one earphone is not connected).The procedure takes less than a minute but requires precise steps to be followed.

Resetting instructions:

1. Place both headphones in the case and close the lid.
2. Press and hold the button on the back of the case (near the Type-C connector) for 15 seconds.
3. The indicators on the headphones will first light up red, then white, and then go out - this is a signal of a successful reset.
4. Open the case cover – the headphones will automatically go into pairing mode (blinking white / red lights).

Once reset, all previous connections will be removed and the headphones will be available for new pairing.If the indicators do not flash after reset, repeat the procedure or check the case charge - at a discharge below 10%, the reset may not work.

⚠️ Warning: Don't confuse the reset button with the charge check button (1-2 second) shows the remaining charge of the case, and the long (15+ seconds) - triggers the reset.

Charge the case at least 20% |

Put both headphones in the case |

Close the case lid |

Hold the reset button for 15 seconds |

Connecting to Android: A Step-by-Step Guide

The pairing of Xiaomi AirDots S with an Android device usually goes without problems, but there are nuances for different versions of the OS. Below is a universal instruction, suitable for smartphones on Android 8.0 and later.

Connection steps:

1. Open the Settings. → Bluetooth on your phone and turn on the adapter.
2. Take the headphones out of the case - they will automatically turn on and start flashing.
3. In the list of available devices, find Redmi AirDots_S (Mi True Wireless EB Basic 2 firmware).

On Android 10+, you may be notified of additional features (e.g., “Improving Sound Quality”) after you connect. We recommend you turn this option on – it activates the AAC codec, which improves the sound on compatible devices.

If the headphones are not defined:

• 🔄 Reboot Bluetooth on your phone (Settings) → Bluetooth → three-point → Reset).
• 📱 Make sure the phone is turned off mode "Saving charge" - it can block the search for devices.
• 🔌 Try connecting from another device (such as a tablet) to check the headphones are working.

💡

If the headphones are plugged in but only sound is coming in one, try manually synchronizing them: pull both out of the case, hold the touchpads on both headphones for 10 seconds until you hear the beep.

Connection to iPhone (iOS): features and limitations

While Xiaomi AirDots S is not officially certified for iOS, it works well with iPhones and iPads, but with some limitations.The main problem is the lack of support for the aptX codec, which affects the sound quality when listening to music through Apple Music or Spotify.

Instructions for iOS:

1. Open the settings → Bluetooth on the iPhone.
2. Get the headphones out of the case - they should appear on the list as Redmi AirDots_S.
3. Click on the name to pair. If the device is not identified, reset the headphones (see section above).
4. After connecting, check the sound – if it is interrupted, turn off “Low Bluetooth power” in the iOS settings.

Important nuances for iOS:

• 🎵 Sound quality will be worse than Android due to codec use SBC instead AAC.
• 📱 Automatic switching between devices (e.g. between iPhone and Mac) will not work.
• 🔋 The indicator of the charge level of headphones in the status bar of iOS is displayed incorrectly (can show 100% at real 50%).

⚠️ Note: On iOS 13 and older, you may have a problem with one of your headphones hanging after a call. To fix this, you just put both earphones in your case for 10 seconds and deliver them back.

Sound tuning and gesture management

Xiaomi AirDots S supports basic control gestures, but their configuration depends on the firmware of the headphones and the phone model.

• 🎧 Double touch on left/right earpiece: playback/pause or accepting a call.
• 🔊 Triple touch: Calling the voice assistant (Google Assistant or Siri).
• 📞 Holding 2 seconds: Refusing to call.

To change the purpose of gestures on Android:

1. Install the Xiaomi Wear app (available on Google Play).
2. Connect the headphones via Bluetooth.
3. Go to Devices → Redmi AirDots S → Gesture Control.
4. Select the action for double/triple touch (e.g., track switching).

On iOS, gesture settings are only possible through third-party apps like AssistantTrigger, but their functionality is limited. Also note that AirDots S does not support active noise cancellation (ANC), but you can turn on Transparency mode (skipping external sounds) in the settings - to do this, hold the touch panel on one of the headphones for 3 seconds.

💡

Gestures on AirDots S only work when Bluetooth is on and you're actively connected to the device. If the headphones are connected but the gestures don't work, reset them and re-pair the pairing.

Solving common problems

Even after a successful connection, users of Xiaomi AirDots S face typical problems: communication breakdowns, different volume in the headphones, fast battery discharge. Below are proven ways to fix them.

Problem 1: Headphones are quickly discharged

• 🔋 Check if the Game mode is on (low latency increases power consumption).
• 📴 Disable automatic connection to headphones in Bluetooth settings.
• 🔄 Update the firmware of headphones through the Xiaomi Wear app.

Problem 2: The sound in the headphones is not synchronized (latency)

This is typical of watching videos or games.

• 🎮 Enable “Low Delay Mode” in Bluetooth settings (available on Android 10)+).
• 📺 Use apps with manual audio synchronization settings (e.g, VLC or MX Player).
• 🔌 Connect your headphones to your TV or PC via Bluetooth 5.0 (latency will be less).

Problem 3: Headphones are connected, but there is no sound

Causes and solutions:

• 🔈 Check if the "Silent Sound" mode is enabled in the special features settings Android/iOS.
• 🎛️ Make sure the correct sound output device is selected in the player application.
• 🔄 Reconnect the headphones or reset them.

Updating firmware and authenticating

Xiaomi AirDots S firmware affects the stability of work, sound quality and battery life. the manufacturer periodically releases updates, but they are distributed through the official Xiaomi Wear app (formerly Mi Home).

How to update firmware:

1. Install Xiaomi Wear from Google Play or App Store.
2. Connect the headphones to the phone via Bluetooth.
3. Open the app, select Redmi AirDots S in the list of devices.
4. If an update is available, a notification will appear – click “Update”.
5. Do not turn off the headphones and do not close the application until the process is complete (takes 2-5 minutes).

How to verify the authenticity of headphones:

• 🔍 In the Xiaomi Wear app, go to the Device Profile → Information.
• 📄 Check the serial number and model – the original AirDots S model is listed as TWSEJ05LS.
• 🛡️ The box and case should have a hologram sticker with QR-code to check on the Xiaomi website.

⚠️ Note: Fake AirDots S often have firmware with bugs that cause the headphones to spontaneously turn off or wheez. If you notice such problems after buying, check authenticity through the official app.

FAQ: Frequent questions about Xiaomi AirDots S