How to connect Xiaomi scales to Honor phone: a complete guide with error solutions

Smart scales Xiaomi has long been an integral part of the ecosystem of a healthy lifestyle, but their connection to Honor smartphones sometimes turns into a real quest. EMUI/MagicUI, In this article, we will discuss all working methods of synchronization, from standard connection via Mi Fit to workarounds for older scales and phones.

You will find out why Honor 90 or Honor Magic5 You may not see the Xiaomi Mi Body Composition Scale 2 scale, how to fix the “failed to connect to the device” error, and what to do if the Zepp Life app (formerly Mi Fit) permanently resets the connection. And we have compiled a table of compatibility of models of weights and smartphones - it will save you hours of experimentation.

Important: the instruction is relevant for all versions of Android (8.0 to 14) and any Xiaomi scale models (including Smart Scale 2, Body Composition Scale and Mi Scale first generation).If your device does not connect, check first the error section where we have collected solutions for 90% of cases.

1.Preparation: What to do before connecting

Before you try to sync your scales to your phone, follow the mandatory preliminary steps, and ignoring them is the main cause of 70% of failed connections.

First, check the firmware version on the Honor smartphone. EMUI 9.x And below may not support Bluetooth 5.0, which is required for stable balance. → System and updates → Update: If no updates are available, use the Mi Home method (described in Section 3).

Second, make sure that the phone allows all the necessary permissions for the Zepp Life app (or Mi Fit if you use the older version). → Annexes → Zepp Life → Permits and turn on:

• 📍 Location (required for Bluetooth in the background)
• 📱 Telephone (for notifications)
• 🔋 Auto-run (so that the application is not closed by the system)
• 🔄 Background activity (critical for synchronization)

And finally, reset the weight settings if they've already tried to connect to another device.

1. Then, put your foot down (or put your weight on it).
2. Wait until the screen appears "0.0" or "Lo".
3. Hold the power button (if any) or simply remove the batteries for 10 seconds.

Install the latest version of Zepp Life (Mi Fit)|Update Honor to current|Give all permissions to the appendix|Reset the weight settings Xiaomi|Turn off the power saving mode-->

2. standard connection via Zepp Life (Mi Fit)

This is the main and recommended way of synchronizing. Follow the instructions carefully, skipping even one step will lead to an error.

1. Download the Zepp Life app (formerly Mi Fit) from Google Play or AppGallery (for Honor without Google services). APK It can contain modified Bluetooth libraries that are not compatible with weights.

2. Register or log in to your account Xiaomi/Zepp. If you already have a Mi Account, use it – the data will be synced automatically.

3.Push the badge "+" In the upper right corner, select "Add device" and in the list, find your scale model (e.g., "Xiaomi Smart Scale 2").

4. Follow the instructions on the screen:

Turn on Bluetooth and Geolocation on your phone.

- Then put the scales on a flat surface and step on them "--" or "0.0").

Wait for the vibration of the scales - this is a signal for the beginning of synchronization.

- Confirm the connection in the app.

💡

If the scales don't vibrate when you connect, check the batteries. Even if the indicator shows a charge, replace them with new ones - often the problem lies in insufficient voltage.

5. Once successfully connected, the scales will appear in the list of devices, and you can now customize the user profile (gender, age, height) for accurate measurements.

3. Alternative ways of connecting

If the standard method didn't work, try one of these options, and they're especially relevant for older Honor models like the Honor. 8X Honor 10 Lite or first generation weights.

Method 1: Through Mi Home

Mi Home sometimes does a better job of connecting older devices. Download it from Google Play or AppGallery, then:

1. Select the Chinese Mainland region when you first launch.
2. Press "+" → "Add the device" → "Libra".
3. Follow the instructions similar to Zepp Life.

Method 2: Manually via Bluetooth settings

This method works if the scales are determined by the phone but are not connected via the app:

1. Go to Settings. → Bluetooth on Honor.
2. Then, put the weights on them.
3. In the list of available devices, find the name of the scales (usually "MI_SCALE_XXXX").
4. Connect to them manually, then return to Zepp Life and try again to sync.

Method 3: Through Third Party Applications

If nothing helps, use universal fitness trackers:

• 🏋️ Google Fit – Supports data import from Zepp Life.
• 📊 Health Sync – syncs with Apple Health or Samsung Health.
• 🔄 Mi Bandage – an alternative client for Xiaomi devices (requires root on some firmware).

Through Zepp Life (Mi Fit)|Through Mi Home.|Manually via Bluetooth|Third-party annexes|Not yet plugged in.-->

4. Solving common mistakes

Even with the right connection, there can be failures.-5 errors and ways of correcting them.

If the error does not disappear, try a full weight reset:

1. Remove the batteries.
2. Press and hold the reset button (usually under the battery compartment cover) for 15 seconds.
3. Insert the batteries back and reconnect.

💡

Most of the mistakes are related to energy saving. EMUI. Always disable battery optimization for Zepp Life and add it to the list of Secure Apps".

5. Notification setting and data synchronization

After successful connection, set up automatic synchronization so that data on weight, fat mass and muscle tone are stored without your involvement.

1. Open Zepp Life and go to the Profile section → Settings of the device".

2. Include options:

• 🔔 Weighing Notices (to receive reminders).
• ☁️ Autosynchronization with the cloud (for backup).
• 📱 Display notifications on the lock screen (for quick access).

3. To export data to other applications (e.g. Google Fit or Apple Health), go to Settings → Integration with other services and connect the right platforms.

4. For family use, add other user profiles to User Management. The scale will automatically recognize a person by weight (incorrectness). ±2 kg).

💡

If the scales show inaccurate data (for example, an overestimated percentage of fat), update your profile in the app. Specify the exact height, age and activity level - this will affect the calculation algorithms.

6. Compatibility of Xiaomi scales and Honor phones

Not all scales and smartphones work perfectly with each other, so we tested the combinations and made a compatibility table.

If your weight or phone model is not listed in the table, focus on the Bluetooth version:

• 🔵 Bluetooth 4.0 (first generation scales) – only work with smartphones EMUI 10+ Or through Mi Home.
• 🔵 Bluetooth 5.0 (second generation and newer scales) – compatible with all Honor models.

💡

For stable operation of scales on Honor, turn off the "Energy Saving" mode in the battery settings. EMUI aggressively closes the background processes, which leads to a rupture of the connection.

7. Frequent questions and answers

8 Additional Tips for Accurate Measurements

To make Xiaomi scales show the most accurate data, follow these recommendations:

✅ Weighing time: optimal in the morning after waking up and going to the toilet. Evening measurements can vary by 0.5-1.5 kg due to the fluid and food consumed.

✅ Surface: Use hard coatings (tile, laminate, parquet) Carpets, carpet and soft linoleum distort readings.

✅ Libra position: Stand flat, not leaning against the wall or furniture. Legs should be shoulder wide, weight distributed evenly.

✅ Measurement frequency: To track the dynamics weigh no more than 1 time per day. more frequent measurements are not informative due to natural weight fluctuations.

✅ Calibration: once a month, check the accuracy of the scales with weights (for example, a 5-pound water bottle). ±0.2 kg, reset the weight settings.

💡

To analyze body composition (fat, muscle, water), use the profile "Athlete" mode if you exercise regularly. Standard algorithms overestimate the percentage of fat in trained people.

⚠️ Note: if you use scales for medical purposes (for example, control of swelling or diabetes), keep in mind that the error of household devices can reach 1-1.5 kg.

⚠️ Warning: Do not store scales in high humidity areas (bathroom, pool) Condensation can damage sensors, which will lead to incorrect readings.