How to Connect Xiaomi Earbuds: A Complete Guide to Setup

Xiaomi’s modern wireless headphones have become incredibly popular due to their excellent price-to-sound ratio. However, after purchase, users often encounter nuances of initial setup that can seem confusing without proper instructions. The process of connecting the Xiaomi Airdots depends on the specific model, whether it is basic Redmi Buds, advanced Mi True Wireless Earphones or flagship Xiaomi Buds 4 Pro.

In this article, we will take a look at all the stages of pairing, from unpacking to fine-tuning through specialized software. You will learn how to properly enter mating mode, what to do if the phone does not see the device, and how to update the firmware to improve connection stability. Proper initial configuration ensures that there are no sound delays and connection problems in the future.

Don’t ignore the importance of updating firmware immediately after purchase, as the factory version of software often contains bugs that developers fix later. MIUI Or third-party apps. Let's start with the basic steps that are relevant to most models. TWS-headphones.

Preparation of headphones for the first turn on

Before you try to find a device on the Bluetooth list, you need to make sure that it is ready to pair. Often the problem of "connecting shaomi airdots" is solved by simply removing protective films from charging contacts. New models, such as the Xiaomi Buds 3T Pro or Redmi Buds 4 Active, transparent insulators can be glued to the legs or body of the headphones themselves.

Remove these films and place the headphones back in the case to activate charging. The indicator on the case should light up, signaling the start of the process. If the indicator does not respond, check the charging of the case itself, connecting it to the network via a Type-C or Micro-USB cable for 15-20 minutes.

⚠️ Warning: Do not force your headphones to turn on if the case indicator flashes red, which is a deep discharge signal. Leave them on charge for at least 30 minutes before trying to connect.

Make sure the case is at least 20-30% charged, as when the energy level is low, some models may not go into detection mode. Once removed from the case, the headphones automatically go into standby mode if they were not previously paired with another device, at which point the indicators on the ears themselves or on the case usually start flashing white.

Basic pairing via Bluetooth on Android and iOS

The most common way to connect Xiaomi Airdots is with the standard Bluetooth menu of a smartphone, which is universal and works on any operating system, including Android, iOS, and HarmonyOS. Open your phone's settings and go to the wireless networking section.

Activate the Bluetooth module if it's turned off and start looking for new devices. At this point, it's important that the headphones are in pairing mode. For most Xiaomi and Redmi models, it's easy to open the case lid with headphones inside or remove them from there.

📱 Open Bluetooth settings on your smartphone and click "Device Search".
🎧 Remove both earphones from the charging case at the same time.
🔍 In the list of available devices, find the name of your model (for example, Mi True Wireless Earbuds Basic 2).
✅ Click on the name to start the pairing procedure.

After successful connection, the status bar will have an earphone icon, as well as the battery level (on some models).If the system requests confirmation of the access code, just click "Confirm" or enter 0000, although for modern models, TWS-Models are rarely required.

📊 What is your model of headphones Xiaomi?

Mi True Wireless Earbuds

Redmi Buds

Xiaomi Buds Pro

Another model

It's worth noting that when you first connect, the right headphone (Master) connects to the phone, and the left (Slave) syncs with the right, which takes a few seconds, and interrupting communication at this point can lead to channel desynchronization, where the sound will come from only one ear.

Using the Xiaomi Earbuds app for advanced customization

To get full access to the functionality of your device, it is recommended to use the official Xiaomi Earbuds or Mi Home application. The standard Bluetooth menu allows you only to broadcast sound, while proprietary software allows you to access the equalizer, adjust touch control and update the firmware.

Download the app from Google Play, App Store or through scanning QR-code that is often printed on a box or instruction. Once installed, launch the program and add a new device, following the prompts on the screen. The app will automatically determine the model of your Xiaomi Buds and offer a current update.

Path to the app menu: Profile → Add device → Search for nearby devices

Inside the app, you can customize gestures: single, double or triple touch for music control and call, and Game Mode is available, which is critical for mobile gaming. Without the application, manual activation of this mode is often impossible.

☑️ Setup in the Earbuds app

Connect headphones to the phoneDownload the Xiaomi Earbuds appRegistering for an accountUpdate firmware to the latest versionSet the equalizer to your taste

Done: 0 / 5

Special attention should be paid to the "Software Update" section. Developers regularly release patches that improve connection stability and noise cancellation. Installing the latest firmware version through the Earbuds application is a must-do step to fix connection bugs.

Features of the connection of models Redmi and Mi True Wireless

Different headphone lines can have their own nuances in the pairing process. For example, the Redmi Buds series often requires both headphones to be removed to enter mode, while some Mi True Wireless models can enter this mode with a long press on the touch zone.

Consider the differences in the behavior of indicators for popular series, and understanding color indications will help you diagnose problems faster during the connection phase.

Model headphones	Indication of mating regime	Action for entry into mode	Features
Redmi Buds 3 / 4	White flashing	Open the case with headphones	Automatic entry
Mi True Wireless 2 / 2S	White flashing	Prolonged touch of the sensor (5 seconds)	You need to touch both.
Xiaomi Buds 3T Pro	Orange/White	Case button (2 seconds)	There's a physical button.
AirDots Basic 2	Red and white.	Extract from the case	Basic model without a button

If your model has a physical button on the case (like the Xiaomi Buds 3T Pro or Mi True Wireless Earphones 2 Pro), the process is simplified by pressing and holding the button for 2-3 seconds until the indicator starts flashing, which force the device to go into visibility mode, even if it was previously paired with another gadget.

What to do if the indicator is constantly burning?

If the light is flat and doesn't flash, it may be that the earphone is already connected to another device within range. Turn off Bluetooth on all previously used devices or select "Forget device" in their settings.> Elimination: Phone can't see headphones The situation when a smartphone does not detect Xiaomi Earbuds is quite common and usually solved by resetting settings. The reason may be residual pairing in the phone's memory or the Bluetooth module hanging in the headphones themselves. The first step is to completely reset your headphones to factory settings. For most Redmi and Mi models, you need to remove the headphones from the case and touch the touch areas on both headphones at the same time 5 times in a row. Indicators should blink several times, confirming the reset. ⚠️ Note: After reset, you need to remove the old pairing in the Bluetooth settings of the phone. Find the device in the list, hit Forget or Unpair, and then do the search again. If the reset didn't work, check the list of paired devices in the Bluetooth settings. If there's a record of your headphones, be sure to delete it. Sometimes the phone clings to the old profile and ignores the new connection request, considering the device is already known, but inaccessible. 🔄 Perform a headphone reset (5 touching the sensor or holding the case button 10-15 sack). 🗑️ Remove the device from the Bluetooth list on your phone ("Forget the device"). 📵 Turn off Bluetooth on your phone on 10 seconds, then turn it on again. 🔌 Put your headphones in your case, close it, then open it and try to reconnect it, and make sure the headphones aren’t automatically connected to another device nearby (tablet, laptop, or other phone). Connection priority is often given to the last used gadget, and headphones can ignore requests from the new source. FAQ: Frequently asked questions on connection Can I connect Xiaomi Earbuds to the iPhone? Yes, the headphones work like normal Bluetooth headsets with iOS. However, the functionality of the Xiaomi Earbuds app on the iPhone can be limited compared to Android. To fully customize, it is recommended to use an Android smartphone for the primary firmware, after which the headphones will work correctly with the iPhone. Why only one headphone works? This is a sign of desynchronization of the left and right channel. You need to re-touch it, then re-touch it from the Bluetooth, then to re-touch it, if you can re-touch it, then re-touch it from the buttons. For models without a button (e.g. Redmi AirDots), pairing mode is activated automatically when first removed from the case. If the headphones were previously paired, you first need to remove them from the phone's memory, put them in the case, close the lid, and then remove both headphones simultaneously. Do you need to charge the headphones before first turning on? It is desirable, but not necessary. The factory charge usually allows you to start using immediately. However, to calibrate the battery controller and install firmware updates, it is recommended to fully charge the case and headphones before active operation. In conclusion, the process of how to connect the headphones, if you need to use it, if you rarely need to use it, if you need to use it, if you need to use it, if you need to use it, if you need to use it, to use it, if you need to use it, if you need to use it, if you need to use it, to use it, if you need to use it, if you need to use it, if you need to use it, if you need to use it, if you need By following these steps, you will ensure the audio device is running smoothly and you will have access to all modern features such as noise cancellation and low latency.