The integration of ecosystem devices from different manufacturers often raises many questions for users, especially when it comes to the bundle of flagship gadgets. Samsung smart watches are famous for their functionality and sensor accuracy, but their home is Galaxy smartphones. However, owners of Xiaomi, Redmi and Poco devices can also enjoy the full range of features of a wearable device if they approach the setup process correctly. Modern versions of the Wear OS operating system have greatly simplified cross-platform compatibility.
The challenge is not the Bluetooth pairing process itself, but installing the necessary system components that are not available in the Google Play app store on non-Samsung devices by default. You’ll need to do a number of extra steps to activate Samsung Account and start all health services. In this article, we’ll go into detail every step, from software preparation to fine-tuning energy savings, so that your watch runs smoothly and doesn’t run out in half a day.
Before you start, make sure both devices are at least 60 percent charged and close to each other. A stable Wi-Fi connection is also critical to initially loading heavy system plugins. Without installing a dedicated Galaxy Watch Plugin plugin, the watch's functionality will be limited to a basic display of time and steps. Let's look at how to get around these limitations and get a full experience of using it.
Preparation of Xiaomi smartphone to pair
The first step is to properly configure the smartphone itself, as aggressive battery optimization in the MIUI or HyperOS shell can block the work of the watch’s background services. You need to make sure that you have an up-to-date Google account installed, and visibility is enabled in Bluetooth settings for other devices. It is also recommended to update the system components of Google Play Services to the latest version through the Play Store.
Special attention should be paid to the permissions for the applications that will manage the watch. Xiaomi system can restrict their operation if you do not prioritize "No restrictions". This will prevent permanent connection breaks and loss of health data throughout the day. Check whether GPS and NFC are on, although they may not be necessary for basic synchronization immediately.
- 📱 Open Bluetooth settings and make sure the module is active and the phone is visible to other devices.
- 🔒 Sign in to your Google account and check for updates for all system services.
- ⚡ In the battery settings, turn off the power saving mode for the time of initial setup.
⚠️ Note: If your phone has any third-party memory cleaners or antiviruses installed, temporarily disable them as they may block Samsung installation files.
After completing these preliminary steps, you can proceed to install the necessary software. Do not ignore this step, as skipping preparation often leads to errors when registering a device in the system.
Installation of the necessary plugins and applications
The key to connecting is installing the Galaxy Wearable app and a dedicated plugin. Unlike Samsung smartphones, where these components are built into the system, Xiaomi needs to download them manually. The main management tool is the Galaxy Wearable app, which acts as the central hub for all settings.
However, just installing the main application, you will encounter the error "Requires a plugin". The system will require you to install Watch Plugins, but in a normal search for the Play Store, the desired component may not be. APK-The file that will tighten the dependencies you need is the most technically challenging phase for beginners.
Where to download the plugin if it is not in the Play Mark?
You can find an official direct link on Samsung’s support page or use verified repositories. APK. Look for a file with a name that contains "Watch6Plugin" or the appropriate clock model.> Once the plugin is installed, restart the phone, which is an action that will ensure that Android system services correctly register new components and allow them to access hardware resources. 📥 Download and install the Galaxy Wearable app from the Google Play Store. 🔌 Install the Galaxy plugin Watch6 Plugin (or) Watch4/5 Plugin depending on the model). 🔄 Perform a full smartphone reboot before launching the app. make sure the Android version on your phone is not lower. 8.0, older versions of the OS do not support the current security protocols used by Samsung watches. Run the Galaxy Wearable app on a prepared smartphone. Press the Start button and wait for the system to scan the ether. Turn on the watch if it's off and bring it closer to the phone. The watch will be asked to pair with a confirmation code. Compare the codes on the smartphone screen and on the watch face. If they match, confirm the action. The pairing process will begin, after which the watch will offer to accept the terms of the license agreement. Read the health data collection items carefully, as this information will sync with servers. ☑️ Checklist for successful pairing App sees watches via Bluetooth:Codes on screens match:Requested watch software update:Samsung account authorized: 0 / 1 During pairing, it may be necessary to update the firmware of the watch itself. This is normal, especially if the device has been in storage for a long time, and it can take 10 to 30 minutes to go out and light up again. ⚠️ Warning: Do not interrupt the firmware update process and keep the watch charging or make sure its battery is at least 50% charged to avoid software failures. Once the update is complete, the clock will reboot and you will see a desktop with widgets. Now the device is technically connected, but it requires the final account setup to work properly.Samsung account and services setup Most features, including setting up new dials and synchronizing health data, require a sign-in to Samsung Account. The Galaxy Wearable app will ask you to sign in or sign up for it, a mandatory requirement of the ecosystem that is not legally circumventable. After logging in, you will have access to the Watch Face Studio dial store and additional apps.The system will also offer to install the Samsung Health Monitor app for pressure measurement and ECG. Note that some features, such as ECG, may be software limited to work only with Samsung phones, but the basic heart rate and sleep monitoring will work correctly.Working on Xiaomi Note Notifications Full Pulsemeter permissions Full Data in Samsung Health ECG / Partial Pressure May require NFC region hacks Payment Depends on the Bank Works through Pay It is important to properly configure the phone synchronization and the phone will be able to have access to the Galaxy contacts, and make sure that you have access to the clock. Optimization of the system MIUI Xiaomi shells are known for their strict memory management policy, which often kills application background processes, considering them to be battery-consuming. To ensure that Samsung watches do not disconnect from the phone every couple of hours, you need to make changes to the autostart and battery settings. Go to your phone's settings, look for Apps, and select Galaxy Wearable and Samsung Health. From Battery, select Unlimited. Also, find Autostart and activate it for those apps, and it will signal the system not to interrupt them. 🔋 In the battery settings, select No Limits mode for Samsung apps. 🚀 Enable AutoRun for Galaxy Wearable, Samsung Health and Bluetooth. 🔒 Lock applications in memory (optional) so that the system does not unload them during cleaning. Additionally, it is recommended to turn off adaptive brightness for the watch screen if you notice that it works incorrectly with the phone’s light sensor. Sometimes sensor drivers from different manufacturers conflict, transmitting incorrect data about the number of lux. ⚠️ Note: After updating the Xiaomi operating system (for example, switching from the MIUI 14 on HyperOS) the energy saving settings may reset and the optimization procedure will have to be repeated. Solving common connection problems Even with all the instructions, specific errors can occur. One of the most common is "Disconnection Failure" or an endless search for a device, in which case it helps to clear the Bluetooth cache. Go to your phone's settings, find the Bluetooth system process in the application list, and click "Clear Cache" and "Clear Data." Another problem is the lack of notifications from messengers. Make sure the Galaxy Wearable app ticks the right messenger (Telegram, WhatsApp, Viber) in the Notifications section. Also check if the watch is not on Do Not Disturb or Theatre Mode. If the watch is no longer synchronizing time, check the date and time settings on the phone. They should be in Auto mode (use network time). A difference in system time even one minute can lead to errors in security certificates when trying to synchronize data. Frequently asked questions (FAQ) Can you answer the phone calls and time, can you use the clock to talk to the text message, and can you see the clock from the clock? However, the function of fast typing (T9 Or voice input, it might not work well or it might not work depending on the keyboard version and the watch model. Will Samsung Pay work on a Xiaomi phone? In most regions, including Russia and the CIS countries, Samsung Pay does not work with any phone on the watch due to the closure of the service. However, you can set up Google Pay (if it is supported in your area) or pay with a card tied through a bank app if such a feature is available.How to reset your watch if it is not connected? To reset, press the power button (top) on the off clock until the Samsung logo appears, then quickly press the power button. 3-5 Once in a row until the Recovery menu appears. reset/Factory reset. Then you can adjust the watch as if it were new. Why doesn't the Samsung Health app get a pulse? Check if the Samsung Health app is running in the background. If Xiaomi's system has killed the process, the data won't sync. Also make sure the watch fits tightly to the wrist, otherwise the sensor won't be able to read the readings.