How to connect Xiaomi Redmi Airdots 2 to a smartphone: instructions with pictures and tips

Xiaomi Redmi Airdots 2 wireless headphones remain among the most popular budget headphones TWS-But many users have difficulty connecting first, especially when it comes to pairing with iOS devices or older versions of Android. In this article, we will analyze not only the standard connection procedure, but also the unique nuances of activating the pairing mode after reset or prolonged downtime, which are rarely mentioned in official instructions.

Structurally, Redmi Airdots 2 has a button on the right earbud that is responsible for turning on, off and switching to search mode. But not everyone knows that successful connectivity requires a strict sequence of actions — for example, to remove both earbuds from the case at the same time, otherwise one of them may not be determined by the system. We will also look at how to fix typical errors such as the absence of sound in one earbud or constant communication breaks.

Preparing headphones for the first connection

Before you start pairing, make sure that the Xiaomi Redmi Airdots 2 headphones are fully charged. The indicator on the case should be lit white (when connecting to charging) or flash red (if the charge level is critically low).

• 🔌 Correction USB-Cable (it is recommended to use the original from Xiaomi).
• 🔋 Cleanliness of contacts in the case – dust or oxidation can block charging.
• 🔄 Try another power source (such as a smartphone charger).

If the headphones are new, remove them from the case and wait for automatic activation (the beep will sound in Chinese). To force on, press the button on the right earphone for 3-5 seconds until the indicator flashes red and white. This means that the device is ready to pair.

💡

If the headphones don't respond to the push of a button, put them back in the case for 10 seconds, then remove and try again. This will reset their current state.

Interface with Android-smartphone (Step-by-step)

Connecting to Android 8.0 and higher devices is as easy as possible thanks to support for the LE Audio profile.

1. Open Settings → Bluetooth on your smartphone and activate the module.
2. Remove both headphones from the case - they should automatically turn on.
3. Press the button on the right earphone for 5 seconds until the indicator flashes white quickly.
4. In the list of available devices, find Redmi Airdots_XXXX (where XXXX — Unique ID) and tap it.
5. Confirm pairing if you request access to contacts or microphone.

After successful connection, the headphones will appear in the list as Redmi. Airdots_2_L (left) and Redmi Airdots_2_R (If one of the headphones is not connected, return both to the case, then repeat the procedure.

Both headphones removed from the case|The indicator flashes white|The Bluetooth list shows both devices.|The sound is being played synchronously.-->

Connection to iPhone (iOS) – features and nuances

While Redmi Airdots 2 isn’t officially certified for iOS, it’s been successful with iPhones and iPads at the A2DP core profile level.

• 📱 On iOS 14 and later, you may need to manually confirm your connection in a pop-up window.
• 🔊 Voice assistant (Siri) functions through headphones will not work.
• 🎵 The sound quality may be worse than Android due to lack of support for aptX codecs or LDAC.

Instructions for iOS:

1. Go to Settings → Bluetooth and turn on the module.
2. Activate the pairing mode on the headphones (see the section above).
3. Wait for the Redmi device to arrive. Airdots_XXXX in the list of “Other devices».
4. Slip the name and wait for the message "Connected".

If the headphones are connected but the sound is interrupted or heard in only one headphone, try:

• 🔄 Turn off and turn on Bluetooth on iPhone again.
• 📵 Remove the device from the list and repeat pairing.
• 🔋 Reboot the headphones (clip the button for 10 seconds to a double beep).

Solving Connection Problems

If Xiaomi Redmi Airdots 2 headphones are not detected by the device or are connected with errors, the reasons may be as follows:

One of the most effective ways to get back up is to reset your settings.

1. Place both headphones in the case and close the lid.
2. Open the lid and press the button on the right earphone for 15 seconds.
3. The indicator will flash red, then white – this is a signal of a successful reset.

Sound tuning and control

After connecting, you can adjust the sound parameters and learn how to control playback:

• 🎧 Single press on the right earphone button: pause/playback.
• 🎧 Double tap: next track (on Android) or call Siri/Google Assistant.
• 🎧 Triple press: previous track.
• 📞 Long press (2 seconds): reject incoming call.

On Android, you can have additional settings on the Bluetooth menu, and you can tap the gear icon next to the headphone name.

• 🔊 Turn off the absolute volume (if the sound is too quiet).
• 🎵 Select a priority codec (e.g, SBC or AAC).
• 📱 Allow access to contacts and call log.

💡

For better sound on Android, turn off the "Absolute Volume" option in Bluetooth settings, allowing you to adjust the volume directly through your headphones rather than through your system mixer.

On iOS, customization options are limited, you can only rename the device or forget it. To improve sound quality, it is recommended:

• 📱 Close background applications that use Bluetooth (e.g. fitness trackers).
• 🔋 Keep headphones and smartphones at a distance of no more than 10 meters without obstacles.
• 🔄 Periodically “forget” the device in the settings and connect again.

How to connect Redmi Airdots 2 to a PC or laptop

The pairing with Windows 10/11 or macOS is the same as with a smartphone, but there are nuances:

On Windows:

1. Open Settings → Devices → Bluetooth and other devices.
2. Click Add Add the device → Bluetooth.
3. Activate the pairing mode on the headphones (blinking white indicator).
4. Choose Redmi. Airdots_XXXX In the list and wait for the driver installation.

On macOS:

1. Go to System Settings → Bluetooth.
2. Click Connect next to the device found.
3. If the sound is not played, in System Settings → Sound, select Redmi Airdots as the output device.

💡

On Windows 10, you sometimes need to manually update the Bluetooth adapter driver through Device Manager if the headphones are connected but there is no sound.

Linux (Ubuntu, Mint, etc.) may require the installation of pulseaudio-module-bluetooth and bluez packages:

sudo apt install pulseaudio-module-bluetooth bluez


pactl load-module module-bluetooth-discover

Tips for care and extension of service life

To make Xiaomi Redmi Airdots 2 last longer, follow the recommendations:

• 🧼 Clean your headphones with a soft brush or cotton swab at least 1 time a week (especially microphone grilles).
• 🔋 Do not discharge completely - try to put headphones in the case at a charge level of 20-30%.
• 🌡️ Avoid overheating – do not leave the case under direct sunlight or near heat sources.
• 💧 Protect from moisture - despite markings IPX4, Exposure to sweat or rain can damage your contacts.

For storage:

• 📦 Always keep your headphones in your case – this protects them from dust and mechanical damage.
• 🔌 If you do not use headphones for more than a week, remove the case from charging and store at room temperature.

💡

The optimal storage temperature for lithium polymer batteries is from +10°C to +25°C. Storage at extreme temperatures reduces battery life by 30-50%.

FAQ: Frequent questions about Redmi Airdots 2