Xiaomi Mi True Wireless Earphones 2 Connection Complete Guide from Pairing to Error Solving

Xiaomi Mi True Wireless Earphones 2 (codenamed TWS Earphones 2 Basic) remains a popular choice due to the balance of price, sound quality and battery life. However, even with such a simple technique, users often have questions: how to turn on pairing mode, why one earbud does not connect, or how to reset to factory settings. This article covers everything from basic smartphone connection to solving rare problems.

We're going to take a look at not only the standard Android and iPhone connection procedure, but also the nuances of Windows PCs, and we're going to give you a checklist to diagnose malfunctions, and if you're in a situation where the headphones are being identified but the sound is only in one of them, you'll find a solution here. And for those who are planning to use Mi True Wireless Earphones 2 with multiple devices at once, we'll explain how to switch between them quickly.

1. Preparation of headphones for the first connection

Before pairing with any device, you need to make sure that the Xiaomi Mi True Wireless Earphones 2 headphones are charged and in working order.

• 🔋 Case Charging: Connect the Case to the Power Source (5V/1A) on 30–60 The indicator on the front panel shall be red during charging and white at full charge.
• 🎧 Check headphones: Take both earphones out of the case - they must automatically turn on (blitzes white indicator).If this does not happen, clean the contacts on the headphones and in the case with a cotton swab dipped in alcohol.
• 📱 Device compatibility: Make sure your smartphone or PC supports Bluetooth 5.0 (optimum) or at least Bluetooth 4.2. Headphones will work with older versions, but there may be problems with communication stability.

If the headphones have previously been connected to another device, they need to be reset.

1. Place both headphones in the case and close the lid.
2. Press and hold the button on the back of the case for 10-15 seconds until the indicator starts flashing red and white alternately.
3. Open the lid – the headphones are now in pairing mode (the white indicator flashes every 2 seconds).

💡

If the indicator on the case does not respond to the hold of the button, try connecting the case to the charge for 5 minutes, then repeat the reset. This often helps with the case battery running low.

2. Step-by-step instruction: connecting to an Android smartphone

Pairing with Android devices (including Xiaomi, Samsung, Realme, etc.) occurs through the standard Bluetooth menu. Important: if you have a Xiaomi smartphone with MIUI 12+ firmware, the system can offer additional settings for the headphones (for example, activation of Game Mode mode to reduce sound latency).

Connection algorithm:

1. Open Settings → Bluetooth on your smartphone and activate the adapter.
2. Take both headphones out of the case - they will automatically go into pairing mode (indicators flash white).
3. In the list of available devices, find Mi True Wireless Earphones 2 (or TWS Earphones 2 Basic) and tap it.
4. Confirm pairing if you have a request. Some devices may need input. PIN-code - default is 0000.

After successful connection:

• 🎵 In the Bluetooth menu next to the headphones will appear the playback icon – this means that they are ready to use.

Headphones are displayed in the list of connected devices|The lights on the headphones are white (do not blink)|The sound is played in both headphones.|In Bluetooth settings there is a item "Media-audio" for headphones-->

3. Connection to iPhone (iOS) and features of the work

Although Xiaomi Mi True Wireless Earphones 2 is an Android device, it is fully compatible with iPhone (iOS 10 and later).

• 📱 Limited functionality: The iPhone won’t run Game Mode (low latency) and some Xiaomi-branded chips, but basic features (music playback, call reception) are available.

Instructions for connection:

1. Open the settings → Bluetooth on the iPhone.
2. Get the headphones out of the case - they should appear on the list as Mi True Wireless Earphones 2.
3. Slip the name and wait for the sign "Connected".
4. To check the microphone, call another number or record a voice message.

If the iPhone can't see the headphones:

⚠️ Note: Some iPhone models (such as iPhone 11 and iPhone 12) may trigger a Bluetooth caching bug. To reset it, go to Settings → Bluetooth, find Mi True Wireless Earphones 2 in the list of "My devices", tap the "i" next to the name and select "Forget this device." Then repeat the pairing.

Android-smartphone|iPhone|PC/laptop on Windows|MacBook|Other-->

4. Connection to a computer (Windows) 10/11)

Pairing with a PC requires a little more steps than with a smartphone, but the process remains intuitive. The main thing is to make sure that your computer supports Bluetooth 4.0+ (check in Device Manager). If there is no built-in adapter, you will need an external Bluetooth dongle (we recommend models on a CSR 8510 or Broadcom 20702).

Step-by-step instructions for Windows:

1. In the list, find Mi True Wireless Earphones 2 and select it. If the device doesn't show up, update your Bluetooth drivers through Device Manager.

Frequent problems on Windows:

5. Operational modes and gesture control

Xiaomi Mi True Wireless Earphones 2 supports basic touch gestures that can be used to control playback and calls. Importantly, sensor sensitivity may vary depending on the firmware of the headphones. If gestures don't work, try updating the software through the Mi Home app (available only for Android).

Standard gestures (by default):

• 🔀 Triple touch on right earpiece: Switch to next track.

Additional functions:

• 🔋 Voice notifications: When connected/disconnected, as well as when the battery is low, the headphones give voice prompts in Chinese (you can not turn off).

If the gestures don't work:

⚠️ Note: After updating the headphone firmware through Mi Home, touch settings may reset. To return them, go to the Mi Home app → Find the headphones in the list of devices → Control settings → Restore the default gestures.

💡

Gestures are only configured through the official Mi Home (Android) app. On iOS and Windows, you can not change control.

6. Troubleshooting: Frequent Problems and Solutions

Even with the right connection, users face typical problems: one earphone is not working, the sound is interrupted, or the device is permanently disabled. Below are proven ways to diagnose and repair.

Problem 1: One earphone doesn't connect or play sound

Reasons:

• 🔌 The battery is discharged in one of the headphones (even if the case is charged).
• 📡 Failure of synchronization between headphones.
• 🧹 Contamination of contacts in the case or on headphones.

Decisions:

1. Reset your settings (see Section 1).

Problem 2: Headphones are quickly discharged

The standard operating time of Mi True Wireless Earphones 2 is up to 4 hours on a single charge (with a case - up to 12 hours).

• 🔋 Check the battery status in the Mi Home app (Battery Status section). If the capacity is below 80%, the headphones require a battery replacement.
• 📵 Turn off Bluetooth on your smartphone when the headphones aren’t in use – the background connection consumes charge.
• 🔊 Turn down the volume – at the maximum level, energy consumption increases by 1.5-2 times.

Problem 3: The sound is interrupted or stuttered

Reasons:

• 📶 Interference from other devices (Wi-Fi router, microwave, USB 3.0 ports).
• 📱 Outdated firmware headphones or smartphones.
• 🔊 Incorrect codec (e.g., incorrect codec, SBC instead AAC).

Decisions:

• Move closer to the sound source (smartphone/PC).
• Turn off Wi-Fi on your smartphone or switch the router to a 5 GHz channel (less loaded).
• Update the firmware of the headphones with Mi Home (Android) or Xiaomi Wear (iOS).
• On Android in Developer Settings (Settings → About Phone → Build Number – tap 7 times) select Bluetooth Audio Codec and set AAC.

💡

If the sound is interrupted in only one headphone, try to swap them (right instead of left). If the problem "move" to another headphone, the smartphone or Bluetooth adapter is defective.

7. Resetting settings to factory

If Xiaomi Mi True Wireless Earphones 2 headphones are unstable, often disconnected or not synchronized with each other, a complete reset will help. This procedure removes all the conjugated devices and returns the settings to the original ones.

How to reset:

1. Place both headphones in the case and close the lid.
2. Connect the case to the power source (required!).
3. Press and hold the button on the back of the case for 20 seconds until the indicator starts flashing red and white alternately.
4. Open the lid – the headphones are now in pairing mode (like after buying).

After discharge:

• 🔄 You will have to reconnect the headphones to all devices.
• 🎵 Gesture settings and volume uniformity (balance) L/R) throw off.
• 📱 Android may require firmware reinstallation via Mi Home.

⚠️ Warning: Do not interrupt the reset process (do not release the button early). If the indicator goes out before the blinking is complete in red/white, the headphones may stop turning on. In this case, leave them on charge for 1 hour, then reset again.

8. Frequently Asked Questions (FAQ)