Connection Xiaomi Earphones 2 Pro: instructions from A to Z with error analysis

Introduction: Why you need the right setup of headphones

Xiaomi Earphones 2 Pro wireless headphones are not just an accessory, but a full-fledged device with active noise cancellation (ANC), adaptive sound and low latency. However, even such advanced technology can cause problems when you first connect. Users often find that headphones are not defined by the phone, connect only one by one or refuse to work after a firmware update. This article will help avoid typical errors and customize the Earphones 2 Pro the first time.

Feature of the model – the use of the Qualcomm chip QCC3040, Provides a stable Bluetooth connection 5.2, But it requires proper initialization, and if you've used other brands of headphones before, like AirPods or Galaxy Buds, the usual connectivity algorithm may not work. AAC/aptX Adaptive that Xiaomi uses to transmit sound.

In this instruction, we will examine:

• 🔹 Basic connection to smartphones on Android and iOS
• 🔹 Solving problems with pairing and sound
• 🔹 Resetting headphones to factory
• 🔹 Hidden functions that are not written in official documentation

1. Preparation of headphones for the first connection

Before you plug in the Xiaomi Earphones 2 Pro, make sure they are fully charged. The indicator on the case should be white (orange when charging). If the indicator flashes red, it means that the charge is below 10%, and the headphones can turn off during pairing.

To activate the search mode, follow the following steps:

1. Take both earphones out of the case. They should automatically turn on (the beep will sound).
2. Press the touch panels on both headphones simultaneously for 5 seconds until the indicators start flashing red and white (pair mode).
3. If the lights are white only, the headphones are already connected to another device, in which case they should be reset (instruction in section 4).

Charge the case to 100%|Get both earphones out of the case.|Hold the sensors for 5 seconds.|Wait for the flashing red and white-->

Important: If you connect your headphones to your iPhone, pre-disable low power mode in Bluetooth settings. On Android smartphones, check that Developer Mode is turned on (if you have previously debugged the device) - it can block the connection of new gadgets.

2. Step-by-step connection to an Android smartphone

On Android, Xiaomi Earphones 2 Pro headphones connect through the standard Bluetooth menu, but with one caveat: to fully work, you need to install the Xiaomi Earphones branded application (available in Google Play). Without it, the ANC settings, equalizer and firmware update will not work.

Instructions:

1. Open the Settings. → Bluetooth on your phone.
2. In the list of available devices, find Mi Earphones 2 Pro (or Xiaomi Earphones 2 Pro in new versions of the software).
3. Click on the name and confirm the pairing. The headphones should make a "Connected" sound.
4. Install the Xiaomi Earphones app and follow the setup instructions (allow access to Bluetooth and Notifications).

💡

If the headphones don’t appear in the list of devices, try rebooting the phone’s Bluetooth module: turn it off for 10 seconds, then turn it on again.

After connecting, check that the Xiaomi Earphones app displays:

• 🔋 Charge level of the case and each headphone separately
• 🎧 Version of firmware (current for 2026 - 1.4.5.8)
• 🔊 Noise reduction modes (ANC, Transparent, off)

Active noise cancellation (ANC)|Transparent mode|Standard sound without effects|Game mode (low delay)|Other-->

3. Connect to iPhone and other iOS devices

On iPhone or iPad, Xiaomi Earphones 2 Pro headphones connect as a normal Bluetooth device, but with limitations:

• ❌ Xiaomi Earphones App Doesn’t Work (Available for Android Only).
• ❌ No control. ANC via iOS – noise cancellation will work in the last selected mode.
• ✅ The basic functionality works: music playback, call reception, touch control.

Connection algorithm:

1. Open the settings → Bluetooth on the iPhone.
2. Activate the pairing mode on the headphones (see section 1).
3. In the list of devices, select Mi Earphones 2 Pro.
4. Confirm the connection. The headphones should be defined as a stereo device.

If the sound is interrupted or there are delays, try:

• 📱 Disable Wi-Fi while listening (interfering with Bluetooth connection).
• 🔄 Reconnect the headphones, having previously forgotten them in Bluetooth settings.
• 🎵 In the music settings (Settings) → Music) turn off EQ (equalizer).

4. Resetting headphone settings to factory

If Xiaomi Earphones 2 Pro is not connected, malfunctioning or “forgot” the previous device, perform hard reset. This will remove all saved pairings and return the settings to the factory.

Resetting instructions:

1. Put both headphones in the case and close the lid.
2. Open the lid and press the touch panels on both headphones at the same time.
3. Hold for 15 seconds until the indicators start flashing red (3 times in a row).
4. Let go of your fingers. The headphones will reset, and the indicator will turn white.

💡

Reset removes all the mated devices, and after the procedure, the headphones will be available for connection as new.

After discharge:

• 🔄 The headphones will automatically go into pairing mode.
• 📱 On your phone, remove them from the Bluetooth device list (if they’re still there).
• 🔋 Charge the case to 100% to avoid problems when reconnecting.

⚠️ Warning: Do not interrupt the reset if the indicators start flashing red. This may cause the firmware to fail and the headphones will stop turning on.

5. Solving common problems

Even after a successful connection, users of Xiaomi Earphones 2 Pro face typical problems.

If the problem is not resolved, check:

• 📲 The firmware version of the headphones (in the Xiaomi Earphones app). Current for 2026 - 1.4.5.8.
• 🔄 Compatible with your smartphone. Headphones are optimized for Xiaomi/Redmi/Poco, Other brands may be unstable.
• 🔋 Battery status. If the case doesn't hold the charge, the headphones will shut down when the charge level is low.

⚠️ Note: If after updating the firmware headphones stopped turning on, do not try to reflash them yourself through ADB Or third-party utilities. Contact the service center - incorrect firmware can disable the Bluetooth module.

6. Hidden functions and life hacks

The manufacturer does not advertise all the features of Xiaomi Earphones 2 Pro. Here are some useful chips that will simplify the use:

• 🎮 Game mode: reduces the latency of sound to 88 ms. Included in the application Xiaomi Earphones in the section Settings of sound.
• 🔊 Customize touch gestures: You can reassign double touch to start the voice assistant or switch tracks.
• 📱 Auto Connection: If the headphones are connected to the Mi Account, they will automatically switch between Xiaomi devices (e.g. from phone to laptop).
• 🔋 Fast charging: 5 minutes in a case give up to 2 hours of playback.

A unique feature of the model: headphones support simultaneous connection to two devices (for example, a phone and a laptop), but only if both devices are on Android.

To enable simultaneous connection:

1. Connect the headphones to the first device.
2. Open the case cover and press the left earphone touch panel for 3 seconds until the sound signal sounds.
3. Activate Bluetooth search on the second device and select Mi Earphones 2 Pro.

💡

If the headphones are connected to two devices, when playing sound on one of them, the other device will automatically be muted.

FAQ: Frequent questions about Xiaomi Earphones 2 Pro