How to connect the Xiaomi Mi Mouse 2 mouse to a laptop: all ways + fixing

The Xiaomi Mi Mouse 2 wireless mouse is a compact and stylish laptop solution, but its connection sometimes raises questions among users. Unlike wired analogues, it requires either a Bluetooth connection or the use of a Bluetooth connection. USB-In this article, we will discuss both connection options, as well as consider typical errors and how to fix them.

The Mi Mouse 2 was available in several versions: with support for Bluetooth only (version). BT) and dually connected (BT + 2.4G If you're not sure what version you have, check the box or sticker on the bottom of the mouse, it should be labeled accordingly. This is critical, because the connection algorithm will differ.

Important: Make sure the mouse is charged before you start (the indicator on the body should flash when you press the scroll wheel). If the indicator does not respond, connect the mouse to charge for 10-15 minutes - a discharged battery most often causes unsuccessful pairing attempts.

1. Connect Xiaomi Mi Mouse 2 over Bluetooth

This is the most common method, because it does not require USB-However, it can run unstable on older laptops with older Bluetooth versions (below 4.0).If your laptop is released before 2015, it's best to use it. USB-receiver (if it is included in the set).

Instructions for Windows 10/11:

1. Activate the pairing mode on the mice: press the on button (located on the bottom) for 3-5 seconds until the indicator begins to flash quickly in blue.
2. On your laptop, open Settings → Devices → Bluetooth and other devices.
3. Click Add Add the device → Bluetooth.
4. In the list, find Mi Mouse 2 (may be displayed as MI_MOUSE_XXX) and choose her.
5. Confirm the pairing. The mouse is ready to go!

For macOS, the algorithm is similar, but the path to settings is different: → Bluetooth (Ubuntu/Debian) Use Bluetooth Manager or command in the terminal:

bluetoothctl


power on




agent on




scan on




pair [MAC- mouse address]




connect [MAC- mouse address]

Press the button on the mouse until the indicator flashes.

Make sure that Bluetooth on your laptop is turned on

Check the mouse charge (the indicator must react)

Update Bluetooth drivers (relevant for Windows)-->

If the mouse is not displayed in the list of devices:

• 🔄 Reboot the Bluetooth module of the laptop (in Device Manager, turn off / turn on the adapter).
• 🔋 Check the battery: connect the mouse to charge for 10 minutes.
• 📱 Remove old mouse pairings in Bluetooth settings (if previously connected to another device).

2. Connection through USB-receiver (2.4G)

This method is relevant for the Mi Mouse 2 version with support 2.4G. The advantage is less input latency (important for gamers or graphics) and no Bluetooth compatibility issues. USB-The receiver occupies the port, which can be uncomfortable on laptops with a limited number of connectors.

Step-by-step:

1. Put it in. USB-receiver to port of laptop. USB 2.0 (black connector), because USB 3.0 (blue) can cause interference.
2. Activate the mouse with a button on the bottom. The indicator should flash green (unlike blue on Bluetooth).
3. Wait for the driver to install automatically (Windows may have a notification).
4. If the mouse does not work, restart the laptop without removing the receiver.

If the mouse is not identified:

• 🔌 Try another one. USB-port (sometimes the front ports on laptops have weak contact).
• 🖱️ Reset the mouse: press the on button for 10 seconds until the indicator goes out, then turn on again.
• 💻 Update the drivers for USB-Devices through Device Manager.

3. Solving common problems

Even after a successful connection, users are faced with typical problems, and let's look at the most common ones and how to fix them.

Particular attention should be paid to the problem with the cursor hanging. If the mouse periodically "freezes" for 1-2 seconds, the cause may be:

• 🔋 Low battery power (even if the indicator is on). Try connecting the mouse to charge while in use.
• 📶 Weak Bluetooth signal: Make sure there are no obstacles between the mouse and the laptop (metal surfaces, walls).
• 🖥️ Driver conflict. In Device Manager, check if there's an exclamation point next to Bluetooth or HID-device.

4. Configure additional functions

By default, the Mi Mouse 2 supports basic functions: left/right buttons, scroll wheel and two side buttons (forward/back). DPI or disable unnecessary gestures.

Recommended programmes:

• 🖱️ X-Mouse Button Control (Windows) – allows you to assign macros, key combinations or run programs to buttons.
• 🍎 SteerMouse (macOS) – advanced settings for mice, including adjusting the cursor speed.
• 🐧 Solaar (Linux) – Control of parameters Logitech/Unifying-Devices (supports some Xiaomi models).

Example of settings in X-Mouse Button Control:

1. Download and install the program from the official website.
2. Select Mi Mouse 2 from the list of devices.
3. For example, set a side button on the Alt.+Tab (switching windows).
4. Save the profile and apply the settings.

To change sensitivity DPI (cursor speed in Windows:

1. Open the settings → Devices → Mouse.
2. In the Additional Mouse Settings section, select the Pointer Settings tab.
3. Adjust the slider to Set the speed of movement of the pointer.
4. Tick to Improve the accuracy of the pointer installation for smoothness.

💡

If the side mouse buttons are running as "back/forward" in the browser but do not respond in other programs, check the settings of a particular software. For example, Photoshop or AutoCAD may require manual assignment of actions.

5 Compatibility with different operating systems

Xiaomi Mi Mouse 2 officially supports Windows, macOS and Android (via Bluetooth), but there are nuances for each OS. Below is the compatibility table and possible limitations.

On macOS, users often face the problem of getting stuck their cursor when using a mouse via Bluetooth.

• Turn off power savings for Bluetooth: System settings → Bluetooth → Additionally. → Allow devices to wake up this computer.
• Update macOS to the latest version (new versions fix peripheral bugs).
• Use it. USB-receiver (if the mouse version supports the 2.4G).

Linux may require manual packet installation:

sudo apt install solaar bluez-tools

6.Comparison with other Xiaomi mice

If you are choosing between the Mi Mouse 2 and the other models of the brand, it is worth considering their key differences.

The Mi Mouse 2 offers an optimal balance of price and functionality: it is lighter than the first version, has side buttons and supports both types of connection (unlike the Mi Portable Mouse). However, if you want a higher sensitivity, look for the Mi Dual Mode Wireless Mouse with three levels. DPI.

For gamers or designers, it is better to consider models with higher levels. DPI (2400+) — For example, Xiaomi Mi Gaming Mouse, and if the priority is compactness, then Mi Portable Mouse will be a good choice for travel.

Care and extension of service life

To make Xiaomi Mi Mouse 2 last longer, follow the following simple recommendations:

• 🧼 Clean the contacts of the charging port every 2-3 months with a cotton swab soaked in alcohol.
• 🔋 Do not discharge completely: connect to charge at a battery level below 20% (the indicator begins to flash red).
• 🌡️ Avoid overheating: Do not leave your mouse in direct sunlight or near heat sources.
• 💧 Protect from moisture: Despite the declared moisture protection, do not use a mouse in wet areas (bathroom, kitchen).

If the mouse is getting worse, clean the optical sensor (bottom) of dust with a soft brush. To restore the smoothness of the plastic, you can use special polyrols for equipment (for example, for example, to restore the smoothness of the plastic, WD-40 Specialist Contact Cleaner).

💡

Regular cleaning of contacts and moderate charging (without full discharge) extend the life of the mouse battery by 30-50%.

If the mouse has stopped holding the charge (it is discharged in 1-2 days), the battery is probably worn out.

1. Try calibrating the battery: completely discharge the mouse, then charge for 12 hours.
2. If it doesn’t help, replace the battery (the Mi Mouse 2 uses a lithium polymer battery). 3.7V 300mAh).

8. Alternative ways of connecting

If standard methods don't work, you can try non-obvious solutions, like connecting a mouse to a laptop using a different protocol or using an intermediate device.

Method 1: Connecting through USB-Bluetooth hub

If the Bluetooth module of the laptop is defective, but there is a free USB-port, you can use an external Bluetooth adapter (for example, TP-Link) UB400). Algorithm:

1. Connect the adapter to the laptop.
2. Install drivers (usually determined automatically).
3. Activate the pairing mode on the mouse and connect it through a new adapter.

Method 2: Using a mouse in "guest device" mode

Some laptops (especially corporate ones) have restrictions on connecting new devices.

• Temporarily disable device connection protection in antivirus (e.g., Kaspersky or Kaspersky) ESET).
• In Windows, turn off Account Control (UAC) time-of-connection.
• On macOS, add your mouse to the list of allowed devices in System Settings → Security.

Method 3: Connecting through a virtual machine

If the mouse is not defined by the host OS, but runs on another machine, you can connect it to a virtual system (for example, VirtualBox or VMware).

1. Connect your mouse to the main OS (even if it doesn’t work).
2. In the virtual machine settings add the device as USB-controller.
3. Run the virtual OS and check the mouse.

💡

If you often work with virtual machines, set up a USB-VirtualBox filter to automatically connect the mouse to the guest OS.

FAQ: Frequent questions about Xiaomi Mi Mouse 2