Connecting Jabra Headset to Xiaomi Phone: Full Instructions with Problem Solutions

Jabra wireless headphones are a popular choice among Xiaomi smartphone users due to the quality of sound, convenience and reliability. However, the connection process sometimes causes difficulties: devices do not find each other, connection is interrupted or sound is transmitted with distortion. In this article, we will analyze all the current ways to pair Jabra with Xiaomi phones (including models on MIUI 14/15), consider typical errors and give recommendations for optimizing work.

The Jabra devices feature support for several connectivity protocols: classic Bluetooth, Multipoint (for simultaneous connection with two devices), and proprietary technologies like Jabra Direct. Xiaomi smartphones can experience nuances due to energy-saving system features or conflicts with other connected gadgets. We tested instructions on Xiaomi 13/14 series, Redmi Note 12/13 and POCO F5/X5 models – all of which work stably.

1. Connection Preparation: What to Check Before Pairing

Before you start connecting, make sure both devices are ready to connect, often because of basic omissions:

• 🔋 Headset charge: Jabra battery level should be at least 30%. With low charge, the headphones may not enter pairing mode or turn off during connection. Check the indicator: on most models (Elite) 75t, Elite 4, Talk 45 flashing red light signals discharge.
• 📱 Bluetooth on Xiaomi: Activate the module in the notification curtain or through Settings → Connections → Bluetooth, on some firmware MIUI Additional location permission is required to enable Bluetooth to work (see the settings section below).
• 🔄 Reset previous connections: If the headset has already been connected to another device, remove it from the list of conjugated gadgets on that phone. otherwise, Jabra can automatically try to restore the old connection.
• 📦 Firmware Updates: Check the relevance of the software on headphones through the Jabra Sound app+ (Available on Google Play.Outdated firmware can cause conflicts with MIUI.

Pay particular attention to Xiaomi’s power saving mode. In some models (like the Redmi Note 11), aggressive battery optimization can block Bluetooth background work. To avoid connection breaks, add the Jabra Sound+ app to the exclusion list:

⚠️ Note: On smartphones with MIUI 13 and older Adaptive Battery may limit Bluetooth gadgets. Turn it off in Settings → Battery → Power saving mode or add a headset to the Apps → Permits → Auto-start.

2. Standard Bluetooth Connection: A Step-by-Step Algorithm

The basic pairing method is suitable for all Jabra models (from Elite Active 75t to Talk 25) and Xiaomi smartphones.

1. Turn the headset into pairing mode: For headphones (such as Elite 4): hold the power button for 5-7 seconds until the indicator flashes blue and red. For mono headsets (such as Talk 45): hold the call button until the "Pairing" beep.

On your Xiaomi smartphone, open Settings → Connections → Bluetooth and activate the search for new devices.

In the list of gadgets found, select the name of your Jabra model (such as the Jabra Elite 75t).If the device doesn't show up, update the list by pulling the screen down.

Confirm pairing on both devices. Some Jabra models will need to enter PIN-code (usually 0000 or 1234).

After successful connection, the indicator on the headset will turn blue (or go out), and the list of devices on Xiaomi will appear the status of “Connected”.

Make sure the headset is charged|Activate Bluetooth on Xiaomi|Remove old connections with Jabra|Update your headphones through Jabra Sound+-->

3. Alternative ways of connecting

If the standard method didn't work, try one of these options, which is especially useful for models with Multipoint or conflicts with other Bluetooth devices.

Method 1: Connect via Jabra Sound+

The branded app not only makes pairing easier, but also provides additional features (equalizer setup, software update, noise management). Download it from Google Play and follow the algorithm:

1. Launch Jabra Sound+ and allow access to Bluetooth, Location and Notifications.
2. Click Add Device and select your model from the list.
3. Transfer the headset to pairing mode (see section above).
4. Follow the on-screen prompts. The app will automatically plug in the headphones and prompt you to update the firmware if necessary.

Note: On Xiaomi smartphones with MIUI 14+, the Jabra Sound+ app may require additional permission for "Background Operations." Without it, the connection will break when the screen is locked.

Method 2: Manually add the device via the "Bluetoothooth scanner"

If the headset doesn’t appear in the standard list, use the built-in scanner:

1. Open Settings → Connections → Bluetooth.
2. Slip on three points in the upper right corner and select Additional → Bluetooth scanner.
3. Enter. MAC-The address of your headset (you can find it on the box or in the Jabra Sound app).+ in the section Device Information).
4. Confirm the connection.

Jabra Elite 75t/85t|Jabra Elite 4/5|Jabra Talk 45/55|Jabra Evolve 20/30|Another model-->

Method 3: Connecting in Multipoint Mode (for two devices)

Multipoint technology allows you to connect Jabra to a smartphone and a laptop at the same time.

1. Pair the headset with the first device (e.g. Xiaomi).
2. Turn on Jabra pairing mode (hold the power button for 10 seconds until you hear "Multipoint").
3. Connect the second device through its Bluetooth settings.
4. Switching between devices is carried out automatically when playing sound or manually (double pressing the headset button).
5. 🛠️ Outdated firmware MIUI: Update the system in Settings → The phone. → Updating the system.

💡

For better sound quality when watching a video, turn off the option Absolute Volume in the developer settings (Settings → About Phone → MIUI version – tap 7 times, then return to Additional → For Developers).

7. Comparison of Jabra with other headsets on Xiaomi

If you haven’t bought Jabra yet and are in doubt, compare them to other popular brands in the Xiaomi ecosystem.

Jabra beats Xiaomi Buds on microphone quality and connectivity stability, but loses out on autonomy.Sony WF-1000XM4 sounds better but often clashes with MIUI firmware over proprietary codecs.

FAQ: Frequent questions about connecting Jabra to Xiaomi