How to connect the Xiaomi S1 electric scooter to your phone: the full guide

Why connect Xiaomi Electric Scooter S1 to a smartphone?

The Xiaomi S1 is not just a vehicle, but a smart device with advanced control functions. Connecting to a phone gives you access to speed, mileage, battery level, and even allows you to customize driving modes through a proprietary app. Without synchronization, you lose half of the options: you can not update your firmware, track your route or receive malfunction notifications.

The process of connecting seems simple, but in practice users face synchronization errors, compatibility problems or sensors incorrectly. In this article, we will discuss the official way of connecting via Mi Home, alternative methods for older versions of the device. Android/iOS, and solving common errors, from lack of response to Bluetooth to location failures.

Special attention will be paid to data security: how to avoid connecting to fake Xiaomi servers and why you should not use third-party applications to control the scooter. All instructions are relevant for firmware 2023-2026 and are tested on devices with Android 12+ and iOS 15+.

Requirements for phone and scooter before connection

Before syncing, make sure your smartphone and Xiaomi S1 meet the minimum requirements, which will save you 90% of the problems during the connection phase.

• 📱 Operating system of the phone: Android 8.0+ or iOS 12+. On older versions, the Mi Home app may not install or work with errors.
• 🔋 Scooter charge: at least 20%. At low battery level, the Bluetooth module is turned off to save energy.
• 📶 Internet connection: required for the first setup (the application downloads device data). You can use mobile traffic or Wi-Fi.
• 🔄 Firmware updates: check the relevance of the scooter software through the power button (3 short presses will show the version).Old firmware often does not support new features of the application.

If your phone doesn’t meet the requirements, try alternative apps like the M365 Tools (for Android) or use a second smartphone for initial setup. Note: on the iPhone below version 12, the Mi Home app may not detect the scooter due to Apple’s restrictions on working with Bluetooth LE.

⚠️ Note: Do not use root rights or jailbreak to install Mi Home on unsupported devices.This violates Xiaomi's security policy and may result in account locking.

Step-by-step: Connection via Mi Home

The official way to sync is through the Mi Home app (renamed Mi Home – Xiaomi Smart Living in some regions), follow the instructions strictly in order to avoid errors.

1. Installation of the app: Download Mi Home from Google Play or App Store. Avoid third-party sources - they can distribute modified versions with viruses.
2. Account registration: Register with your phone number or email. Linking to your Xiaomi account is mandatory to save your scooter data in the cloud.
3. Adding device: Press "+" in the upper right corner → select "Transport" → "Electric scooter" → Xiaomi Electric Scooter S1.
4. Bluetooth activation: Turn on Bluetooth on your phone and wait for the app to detect the scooter. Make sure the scooter is on (long press of the power button).
5. Confirmation of connection: Click "Connect" in the application. The scooter will emit an audible signal, and the indicator on the steering wheel will flash blue - this means successful synchronization.

If the scooter is not detected, try:

• 🔄 Reboot the phone’s Bluetooth module (disable/enable in settings).
• 📱 Remove the Mi Home app cache in your phone settings.
• 🔋 Remove and re-insert the battery of the scooter (if you are confident in your skills).

Bluetooth on your phone

Scooter charged at least 20%

The latest update to Mi Home has been installed

Phone's connected to the Internet.-->

Setting up the scooter parameters through the application

After connecting to Mi Home, the Xiaomi S1 control panel will open with the main parameters. Let’s consider the key settings that should be changed immediately:

To access advanced settings, go to Device → Settings → Additional. Here you can:

• 🔧 Calibrate the speed sensor (if the readings are inaccurate).
• 🔄 Update the firmware of the scooter (requires a stable Internet!).
• 📊 Reset mileage statistics (useful when selling).

⚠️ Warning: Changing settings Maximum speed or manual engine power can cause the controller to overheat. Xiaomi automatically resets these settings the next firmware update.

💡

If after updating the firmware scooter began to accelerate more slowly, check the settings of regenerative braking - sometimes they are reset to factory values.

Solving common connection problems

Even with the right setup, users are faced with errors, and let's look at the most common ones and how to fix them.

1.The scooter is not found in the Mi Home

Reasons:

• 🔌 Bluetooth module of the scooter is disabled (battery discharged or mechanical damage).
• 📱 Power saving mode is enabled on the phone, blocking the background work of Bluetooth.
• 🔄 Older version of the Mi Home app (update in store).

Solution: Reset the scooter (hold the power button for 10 seconds), then re-search the app. If it doesn't work, try connecting from another phone.

2. Connection is interrupted while driving

This is a typical problem for Android devices with aggressive battery optimization.

1. Open your phone settings → Applications → Mi Home → Battery.
2. Select “No restrictions” or “Allow background activity”.
3. Add Mi Home to the list of energy saving exceptions.

3. "Device not supported" error

This error occurs if you are trying to connect a scooter to a Xiaomi account registered in another region (e.g. a European scooter to a Chinese account).

• 🌍 Change the account region in the Mi Home settings (in the user profile).
• 📧 Create a new account with the right region (e.g., Russia for scooters with labels) RU).

Alternative ways to connect (without Mi Home)

If the official app doesn’t work, you can use third-party solutions, but remember that they don’t guarantee stability and may violate Xiaomi’s privacy policy.

1. M365 Tools app (Android only)

This is unofficial software with advanced settings, including:

• 🔧 Unlocking the speed limit (up to 30)+ km/h).
• 📊 Detailed telemetry (engine current, controller temperature).
• 🔄 Customization of firmware (at your own risk and risk!).

How to connect:

1. Download the M365 Tools from the official website (avoid pirated versions!).
2. Turn on Bluetooth and click “Connect” in the app.
3. Select the Xiaomi S1 model from the list of devices.

⚠️ Attention: Use M365 Tools for overclocking a scooter above 25 km/h cancels the warranty and increases the risk of accidents.

2. Connect via Home Assistant (for advanced users)

If you use the Home Assistant smart home system, you can integrate the Xiaomi S1 through the Xiaomi Miio plugin.

• 📱 Control your scooter with your voice (via Google Assistant or Alexa).
• 📊 Tracking statistics in real time on the dashboard.
• 🔔 Receive notifications of low charge or fall.

Instructions for setting:

1. Install Home Assistant on Raspberry Pi or server.


2. Add Xiaomi Miio integration through the Settings menu → Devices and Services.




3. Enter your Xiaomi account token (can be obtained via miot-spec.org).




4. Select Xiaomi S1 from the list of available devices.

Security and privacy when connecting

Connecting the scooter to the phone involves transferring data to the Xiaomi cloud, and consider what data is collected and how to protect it:

• 📍 Location: Mi Home requests access to geodata to display routes. Disable this permission if you don't use tracking.
• 🔑 Account data: Xiaomi encrypts the information you send, but for additional protection, enable two-factor authentication in your profile.
• 📊 Travel statistics: Stored on Xiaomi servers. To delete it, go to Profile → Devices → Xiaomi S1 → Delete the data.

Avoid connecting to a scooter via public Wi-Fi networks, which increases the risk of data interception. If you are selling or transferring a scooter to another person, be sure to untie it from your account:

1. Open Mi Home and select your Xiaomi S1.
2. Go to Settings. → Remove the device.
3. Confirm the action (the scooter will emit a long beep).

💡

Never share a Xiaomi account access token – it gives you full control over all your smart devices, including your scooter.

FAQ: Frequent questions about Xiaomi S1 connectivity