Modern wireless headphones from Xiaomi have gained popularity due to excellent sound and affordable price, but the initial setup may raise questions for beginners. The process of connecting Air Dots Xiaomi to a smartphone looks simple, but often users are faced with the fact that the devices do not see each other or only work one headphone. This is due to the peculiarities of the Bluetooth protocol and the specifics of the case itself, which acts not just as a charger, but also the main interface module.
In this article, we will discuss in detail all the synchronization steps for different models of the AirDots, Redmi Buds and Mi True Wireless series. You do not need to be a technical specialist to get the gadget working, just follow the logic described below. We will look at standard scenarios, features of connection to iPhone and Android, and methods of forced resetting if the usual methods do not work.
Successful pairing is just the first step to listening to music, and the right initialization of the devices ensures a stable signal, minimizes game delays, and keeps the microphone running correctly during calls, and it's critical to remember that the right earpiece is always a master device that sends the signal to the left, so the primary connection is always through the right side.
Preparation of the gadget and smartphone for the first inclusion
Before trying to find a device in the list of available networks, you need to make sure that all components are ready to work. Often users forget that new headphones can come with a factory protective film on the charging contacts inside the case. If you take the device out of the box, carefully examine the inside of the charging box and remove the transparent stickers from the metal contacts on the headphones themselves, otherwise they will not charge and will not turn on.
The smartphone also requires pre-preparedness.Make sure the wireless module is activated and visible to other devices.In some cases, old saved profiles may conflict with the new connection, so it's a good idea to go to Bluetooth settings and remove all previously known devices called Redmi AirDots or Mi True Wireless if you've ever tried to connect them.
For the system to work properly, the charge of the case and the inserts themselves must be at least 30-40%. At low charge, the device can go into power saving mode and not search the network. Place both headphones in the case, close the lid and wait about 10-15 seconds, then open the lid without removing them to start the automatic on-set process.
⚠️ Warning: Do not attempt to remove headphones from the case before the indicators inside the box go out or do not light up, signaling the start of charging.Abrupt extraction at the time of contact can cause a micro-surge of voltage, which sometimes leads to dissynchronization of the left and right channel.
Standard procedure for connecting to Android and iOS
The algorithm for Android and iOS smartphones is almost identical, as the phone’s operating system takes over. Once you open the case lid and remove both headphones, they must automatically go into pairing mode, usually signaled by a quick flashing indicator (most often white or red, depending on the model) on one or both devices.
On your smartphone, go to the settings menu and select the Bluetooth section. Run scanning for new devices. The list of available gadgets should show the name of your model, for example, Redmi AirDots or Mi True Wireless Earbuds Basic. Click on this name. Some versions of firmware may request permission to pair — confirm the action.
Once the connection is successful, the headphone assistant will say the "Connected" phrase, and the indicators will stop flashing often and light up less often or go out completely. If you use an iPhone, the process is similar, but the iOS system can request permission to access contacts to determine the name of the caller, which is standard procedure for headsets.
Sometimes the system may offer to install an additional application, such as Xiaomi Earbuds or Mi Wear. This is not a requirement for basic work, but allows you to update the firmware and adjust the equalizer. If you want to just listen to music, additional applications can be ignored.
Features of setting up different models of the AirDots series
The Chinese manufacturer’s line of wireless headphones is extensive, and each model has its own nuances in control and indication. Understanding these differences helps to diagnose problems faster. Below is a table that will help you identify the behavior of your device.
| Model | Case indication | Management | Feature |
|---|---|---|---|
| AirDots Basic 1 | Red indicator in the case | Mechanical buttons | Long press to turn on |
| AirDots Basic 2 | No indicator in the case. | Sensory management | Auto-inclusion upon retrieval |
| Redmi Buds 3 | LED on the front panel | Sensor + Annex | Support for Noise Reduction (ANC) |
| Mi True 2 | Indicator inside | Double touch. | Low latency in games |
Mechanical button models, such as the first version of AirDots, require physical pressing to turn on the case. Hold the button for about 2-3 seconds until the indicator lights up. Newer versions, such as Basic 2 and higher, use touch control or automatic activation when extracted from the case, which greatly simplifies operation.
For active noise-canceling models such as the Redmi Buds 3 Pro, the initial setup may take longer.The system should calibrate the microphones of the ambient environment, in which case it is recommended that the first minutes after the connection do not turn on the music loudly, giving the ANC (Active Noise Cancellation) algorithms to tune in to the ambient noise.
What do the color of the indicator mean?
Solving problems: if headphones are not connected
The situation where the phone sees the device but doesn't connect, or only one headphone connects, is the most common.This often means that the synchronization between left and right channel (TWS) is disrupted. To fix this, you need to perform a full Hard Reset. To do this, place both earbuds in the case, make sure they charge, and press the reset button on the case (if any) or press the touch zones on both earbuds simultaneously for 10-15 seconds.
After reset, the indicators should often blink, signaling a return to factory settings. Then remove the device from the phone's memory ("Forget the device") and repeat the pairing procedure again, it is important to perform these actions away from other active Bluetooth devices to avoid interference.
☑️ Checklist of diagnostic problems
If the problem persists, check if the headphones are connected to another device nearby. TWS-Headsets often automatically try to connect to the latest known gadget, blocking the connection to a new phone.Switch off Bluetooth on all other devices within a 10-meter radius.
⚠️ Warning: When performing a reset, keep your headphones tightly pressed against the contacts inside the case. If the contact is poor, the reset command will not be executed, and you will waste time.
Use of voice assistant and multimedia
Once you're connected successfully, you can use built-in controls. Most models support a Google Assistant, Siri, or Xiao AI call. Usually, this requires triple tapping or long-term retention of the touch zone. The voice assistant allows you to control music, calls, and navigation without removing the phone from your pocket.
For gamers, it's important to know about low latency, and in some models, it's activated triple-tap on the right earpiece, and in this mode, the speed of audio transmission is critical for shooters and rhythm games, although the sound quality may change slightly, and for listening to music, it's better to turn off this mode.
💡
Use the right earphone as your main control. In most Xiaomi models, it is the right side that is responsible for taking calls and switching tracks, so try not to lose sight of it.
The sound quality also depends on the codec your smartphone uses. Make sure that your Bluetooth settings (under Device Information or through the Engineering Menu) choose an AAC or aptX codec if your phone and headphones support these standards, which will provide a cleaner sound than a standard SBC.
Device care and extension of service life
To keep the headphones lasting, it is important to keep the contacts clean. The sulfur and dust accumulated on the speaker grid and charging contacts can cause the earphone to stop charging in the case. Regularly wipe the contacts with dry soft cloth. Do not use wet wipes with alcohol directly on the speaker grid so as not to damage the membrane.
Keep the case safe from extreme temperatures. The lithium polymer batteries used in AirDots are sensitive to overheating and extreme frost. Don't leave the device in the direct sun in the car in winter or summer. The optimal storage temperature is room temperature.
💡
Regular cleaning of contacts and storage at room temperature increase the life of the case battery to 3-4 years of active use.
If you plan to keep your headphones off for a long time (more than a month), charge the case and the headphones themselves to about 60-70% and turn them off (if there is such a feature), or simply put them away in a dark place. Every two to three months, check the charge and recharge the device to prevent a deep discharge that can irreversibly damage the battery.