The compatibility of devices from different brands often raises questions among users, especially when it comes to the bundle of popular Honor smartphones and wearable electronics from Xiaomi. Fortunately, the Android ecosystem makes it easy to combine gadgets if you know the right sequence of actions. The pairing process does not require deep technical knowledge, but has its own nuances that must be considered for stable operation.
The main task is to install the right software and properly configure Bluetooth connection. Many users make the mistake of trying to combine devices exclusively through the Bluetooth system menu, which leads to data synchronization errors. It is important to understand that a fitness tracker or smartwatch requires a specialized intermediary application to work fully.
In this guide, we’ll take a detailed look at every step, from smartphone preparation to fine-tuning notifications.You’ll learn how to avoid common connection break issues and why older apps may not work on newer versions of Android.Let’s get your gadgets ready for productive collaboration.
Preparation of devices before setting up
Before you start pairing, you need to make sure that both devices are in good condition and ready to go. Charge the Xiaomi Mi Band or Amazfit watch to a level of at least 50-60% so that the setup process is not interrupted due to a sudden shutdown. Honor smartphone should also have sufficient battery power, as active device search and initial synchronization can consume a significant amount of power.
Check the operating system version on your phone. Modern apps require Android version 6.0 and higher to work properly, but Android 10 or later is recommended to work consistently with new watch models. Update the phone's system software through Settings → System and Updates → Software Update if new versions are available.
💡
Make sure the clock and phone have the same time and time zone before pairing – this will prevent synchronization errors.
Clear the list of previously paired devices in Bluetooth settings if you have previously tried to connect this watch to a phone. Having junk records of old connections often causes the phone to not see the tracker or refuse to create a new pair, this is especially true if you have previously used another phone or reset your network settings.
Selecting and installing the right application
The key to setting up is choosing the right software.The Xiaomi ecosystem has undergone changes in recent years and many older apps like the Mi Fit have been renamed or replaced.For most modern devices, including the Mi Band 4, 5, 6, 7, 8 and the Amazfit series watches, the main app is now Zepp Life (formerly Mi Fit) or the new Mi Fitness app (also known as Xiaomi Wear).
Honor phone owners should be careful when downloading software. Since Honor smartphones do not have built-in Google services on new models, app installation can be done through the AppGallery store or directly through the AppGallery store. APK-However, to ensure security and automatic updates, it is better to use trusted app stores.
- 📱 Zepp Life is a universal application for most Mi Band trackers and Amazfit watches, supporting deep data synchronization.
- ⌚ Mi Fitness – a new application for the flagship watch Xiaomi Watch and the latest versions of trackers, offering an updated interface.
- 🏃 Huawei Health – In some rare cases, it can be used for basic features, but not recommended for full functionality of Xiaomi.
Once you install the app, you need to register an account, you can use your phone number, email address, or log in through social media accounts such as Facebook or Google, and it is recommended to link your account to your phone number so that you can restore access in the event of a device loss or smartphone change.
The process of pairing via Bluetooth
The process of connecting requires a consistent execution of actions. Do not try to search the device through the standard Bluetooth menu in the phone settings, this will lead to the error "Can not connect." The whole procedure must be carried out strictly inside the interface of the installed application.
Launch the app on Honor and log in to your acca!unt. On the home screen, find the Profile tab or device add icon (usually located at the top right or bottom of the screen). Click on the Add Device or Plus button. The app will request permission to use geolocation - this is a mandatory requirement for Android to scan Bluetooth devices, so you have to agree.
☑️ Checklist before connection
When you start scanning, you'll see a list of available devices on your phone. Find your model name, like the Mi Smart Band 6 or the Amazfit GTS. Click on the name. You may see a request on your watch to confirm the pairing with the tick symbol or vibration signal. You can confirm the action by pressing the touch button or the physical key.
⚠️ Note: If the app says, "The device is already connected to another account," it means that the watch has not been detached from the previous owner or phone.
Once the connection is successful, the process of synchronizing time and setting up a profile will begin. The phone will transmit the current time, date and language settings to the watch, while keeping the devices close to each other without turning off the smartphone screen. The process can take from 1 to 3 minutes depending on the firmware version of the watch.
Setup of permissions and notifications
In order for Xiaomi smartwatch to work fully in tandem with Honor, you need to provide the application with a wide range of permissions. Without this, you will not be able to receive notifications from messengers, see calls or track the route of the jog. Modern versions of the MagicOS shell or Android on Honor strictly control the background activity of applications.
Go to Settings → Applications → Apps and find it in the list of Zepp Life or Mi Fitness. Go to the "Allowances" section. You need to activate access to the location, microphone (for voice control, if any), contacts and phone. Pay special attention to the "Outstart" item - it must be turned on so that the system does not "kill" the synchronization process.
| Type of permit | Status | Why? |
|---|---|---|
| Location | Allowed always. | To track GPS and search for the device |
| Bluetooth | Permitted. | To communicate with the clock |
| Contacts/Phone | Permitted. | To display the name of the caller |
| Notifications | Permitted. | For push notifications on the wrist |
Next, set up notifications. In the Zepp Life app itself, go to your device profile and find the "Application Notifications" section. Activate the switches for the right programs: Telegram, WhatsApp, Viber, Instagram, and others. Note that the notification text will only appear if the source app also has permission to display notifications on Android.
Why aren't the notifications coming?
Solving Connection Problems
Despite the simplicity of the procedure, users sometimes face difficulties. One of the common problems is when the phone sees the device, but the connection is reset at 90-99%, often due to a conflict of Bluetooth versions or the cache of the Bluetooth service on the Android system.
In this case, try to perform the following actions:
1. Turn off Bluetooth on your phone and watch, then turn it on again.
2. Remove the application and install it again.
3. perform a full clock reset via the settings menu on the tracker itself.
Another common problem is the fast discharge of hours after connecting to Honor. This can be caused by the phone constantly trying to update data or losing the signal. Battery optimization in the phone settings should be turned off for the tracker application. Find the "Run Apps" option in the battery settings and remove all restrictions for Zepp Life.
⚠️ Warning: When you reset your clock to factory settings, all accumulated training data that is not synchronized with the cloud will be permanently deleted. Always check the relevance of the data in the application before resetting.
If the watch is no longer responsive to pressing or is frozen, use the reset function. On models without buttons, this is done by holding the touch zone for a long time (about 15-20 seconds) or setting to charge. For models with a button, holding the button for a long time.
Additional features and synchronization
Once connected, you can have a wide range of health monitoring capabilities: Xiaomi watches can track heart rate, blood oxygen (SpO2), sleep and stress phases, and these data are automatically transmitted to Honor and stored in history, allowing you to plot and analyze the dynamics of changes.
For sports fans available mode GPS-Although the trackers themselves in the Mi Band series often do not have built-in tracking. GPS-And the module, they use the geolocation of the phone, which means that to record the route of the jog, the phone has to be with you, and the app is running. GTS/GTR often have built-in GPS, What makes you run without a phone.
💡
Using third-party services like Google Fit or Apple Health (through synchronization) allows you to combine health data from different sources into a single ecosystem.
Remember to check the watch’s firmware updates periodically. The manufacturer regularly releases patches that improve the accuracy of the pulse sensors and correct connection errors. Notification of the new version will appear in the device profile in the application. It is recommended to update when the watch is charged more than 50% and connected to the charger.
Also worth mentioning is the ability to change dials. The dial store has thousands of screen design options, from classic analog to sports to animated. Changing the dial is the easiest way to personalize a device to your style or current activity. Some dials allow you to display more data, such as weather, steps or calendar.