How to connect the Xiaomi Amazfit watch to your iPhone

Integrating Xiaomi wearables into the Apple ecosystem has long since ceased to be a problem requiring complex technical manipulation. Modern models such as the Amazfit GTR, GTS or the T-Rex line are initially developed with cross-platform compatibility in mind, ensuring stable operation on iOS. Users of Apple smartphones have access to the full functionality of the tracker, including notifications, music management and detailed activity analysis, with little or no restrictions.

But the initial setup process has its own nuances that distinguish it from pairing with Android devices, and the key is the right sequence of steps when installing software and activating Bluetooth protocols. If you ignore the connection order, the gadget may not be defined by the system or work incorrectly, losing some important functions.

In this guide, we will take a look at all the stages of setting up, from smartphone preparation to fine calibration of sensors, and learn how to avoid common synchronization errors and how to make your device work as efficiently as possible in conjunction with iOS.

Preparing iPhone to work with Amazfit

Before trying to connect devices, you need to make sure your smartphone meets the minimum technical requirements.To work properly, the Zepp app (formerly known as Mi Fit) requires iOS operating system version 10.0 or higher. Owners of older iPhone models such as the 5S or 6 should check the availability of updates in the settings in advance.

An important step is to free up space and clear the cache. Even if the app is already installed, it is recommended to completely remove it and download it again from the App Store, which will avoid version conflicts, especially if you have previously used older versions of Xiaomi tracker software.

⚠️ Warning: Make sure your iPhone is Bluetooth enabled and geolocated. GPS The app will not be able to properly calibrate steps and training routes.

It is also worth checking the privacy settings. In Settings → Privacy → Fitness should be allowed access to the Zepp app. Without this permission, activity statistics simply will not be stored in the Health system.

📊 What kind of model is Amazfit?

GTR/GTS Series

T-Rex Series

Bip Series

Band Series

Another model

Installation and configuration of the Zepp application

The main tool for managing the watch is the Zepp app. You can find it in the App Store by requesting "Zepp" or scanning it. QR-code from the instructions that come with the package. After downloading and installing, do not rush to start searching for devices.

The first run will require authorization.You can use a Xiaomi, Apple ID or Google account (through interim authorization).It is recommended to use the same account you plan to use on other devices, if you have them, to save your activity history in a single cloud.

In the initial setup, the app will request a number of permissions, including access to notifications, Bluetooth, geolocation and local area network, and consent to all points is critical to the full operation of a smartwatch.

☑️ Checking before synchronization

Bluetooth enabledGeolocation enabledCharging hours over 20%Zepp application installed

Done: 0 / 4

The process of pairing the clock with the iPhone

The connection process itself is divided into two stages: pairing through the app and confirmation in iOS. First, open the Zepp app and go to profile. click on the Add Device button and select your model from a list, such as Amazfit Bip U or GTR 3.

Once you select a model, a confirmation code will appear on your smartphone screen. A similar code (or pairing request) should appear on your watch screen. Press the green tick on your screen to confirm.

At that point, the iPhone can issue a system notification requesting Bluetooth pairing, press "Put" or "Pair." If you don't, the watch will remain on standby and will not transmit data.

Model clock	iOS version (min)	Annex	GPS support
Amazfit GTR 4	iOS 12.0+	Zepp	Built-in
Amazfit Bip U Pro	iOS 10.0+	Zepp	Built-in
Amazfit Band 7	iOS 12.0+	Zepp	Connected GPS
Amazfit T-Rex 2	iOS 12.0+	Zepp	Built-in

Once successfully paired, you'll start automatically syncing time and updating your firmware, and don't interrupt this process even if your smartphone screen goes out.

What if the code doesn't come?

If the confirmation code doesn't appear on the watch, try rebooting both devices. Also make sure the watch isn't connected to the other phone via Bluetooth in the background.> Setup iOS permissions and notifications To make the watch really "smart," they need to allow access to phone data. Go to Settings → Bluetooth, find your watch in the list of devices and click on the "i" icon. Here you need to activate the "Show notifications" switch. Next, go to the settings of the Zepp app itself. In your profile, select "Application settings" → "Notifications and calls" Here you can flexibly configure what apps will be on, you can only keep your message on the background. To keep notifications coming in consistently, the Zepp app must have permission to update content in the background. ⚠️ Note: If notifications stopped coming after the iOS update, check your power saving settings.The system could automatically limit Zepp's background activity. Calls must be allowed to access the microphone if you plan to use the "answer" function (not available on all models) or simply see the caller's name. Integration with Apple Health and other services One of the main goals of iPhone owners is to combine health data in one place.The Zepp app is a great friend of Apple Health. →"Add accounts" → Apple Health. The system will request permission to read and write data, recommends that all categories be allowed: steps, pulse, sleep, weight and calories. This will allow you to build more accurate activity schedules and see the big picture in the standard Health app, and integration with Strava and Google Fit (through intermediaries) is available, which will be appreciated by fans of running and cycling, track and tempo data will automatically be uploaded to the athlete profile. 💡Two-way synchronization with Apple Health allows you to use the clock data to fill the activity rings of the iPhone, which motivates you to move more. Solving problems when connecting Despite the debugging process, sometimes there are failures. A common problem is that the watch is visible in Bluetooth but not connected in the app, and in this case, you have to go to the Bluetooth settings of the phone, click "Forget this device" and then repeat the search in Zepp. Another common situation is time desynchronization. If the clock is showing the wrong time, check if the Zepp app has the right time zone and automatic time synchronization with the phone is enabled. If the app is constantly crashing or not finding the device, try resetting the iPhone network settings. This won't delete your data, but will update the Bluetooth stacks of the system. Why doesn't the clock vibrate at notifications? Check if the watch is on "Do Not Disturb" (crescent icon). Also make sure that the Zepp settings for a particular application (for example, WhatsApp) have an "On" switch. Can I respond to messages from an iPhone watch on the Amafon? How do I watches on the Android models with only the interfaced voices? In the watch menu, look for System or Settings, scroll down to Reset. Confirm. After that, the watch will need to be reconnected as a new device. Do the watches use a lot of iPhone battery power? Current Bluetooth Low Energy (BLE) protocols consume minimal energy. The effect on iPhone autonomy will be subtle, usually no more than 2-3% per day. What to do if the confirmation code does not come in? Make sure that the watch is not paired with another phone. If so, break the connection on the old device. Also helps a full reboot of the watch through the menu or buttons.