Connecting Huawei Watches to Xiaomi Redmi Smartphone: A Complete Guide to Problem Solutions

Synchronizing Huawei’s smartwatch with Xiaomi’s Redmi phone is a task that seems simple at first glance, but often raises questions among users, because both brands use their own ecosystems: Huawei Mobile Services (HMS) and MIUI, which are not always perfectly compatible with each other. In this article, we will examine not only the standard Bluetooth connection process, but also the nuances of setting up notifications, solving typical errors (for example, “Unconnected” or “Device is not supported”), as well as alternative synchronization methods for watch models without official MIUI support.

Particular attention will be paid to the influence of the firmware version Xiaomi Redmi on the stability of the connection: so, on devices with a MIUI 14+ Android 13+ You may have problems with the background access of the Huawei Health app, which is solved by manually adjusting the permissions. GT Huawei Band series 6/7, Sometimes blocked by Xiaomi’s security system as “uncertified” accessories.

Compatibility of Huawei watches and Xiaomi Redmi phones: what you need to know

Before you start connecting, it’s important to make sure your devices are software-compatible. Most Huawei Watch models (including GT 3/4, Watch Fit 2, Band 7/8) officially support Android smartphone connectivity, but there are nuances:

• 📱 Android Version: Minimum Requirement – Android 6.0, But for stable operation is recommended Android 9.0+. On Xiaomi Redmi with Android 12/13 Additional permissions may be required.
• 🔄 Firmware MIUI: On the versions. MIUI 12.5 and later, built-in power optimization can block Huawei Health background work, resulting in notifications missing or connection breakage.
• 🔗 Bluetooth version: Huawei watches use Bluetooth 5.0/5.2. Make sure your Redmi supports this version (e.g. Redmi Note) 10 Pro is, yes, and Redmi is. 8A — no).

If your watch model isn’t on the official list of compatible devices, it doesn’t mean that you can’t connect.For example, the Huawei Watch D (with a pressure sensor) can work with Redmi, but you’ll need to manually adjust the permissions for the Huawei Health app.

Preparing Xiaomi Redmi phone for connection

To avoid synchronization errors, you need to set your smartphone correctly.

Enable Bluetooth in settings (Settings → Connections → Bluetooth)

Install Huawei Health app from official source (not APK)

Disable Power Saving Mode for Huawei Health (Settings → Battery → Energy Saving → Applications without restrictions)

Allow Huawei Health to Auto-Run (Settings → Applications → Permissions → Auto-Run)

Clear the Bluetooth cache (Settings) → Annexes → Systemic → Bluetooth → Warehouse → Clear the cache)-->

Note the permissions for the app. In MIUI, many background processes are blocked by default, so that Huawei watches receive constant notifications:

1. Open Settings → Applications → Application Management → Huawei Health.
2. Enable all switches in the Permissions section (especially Notifications, Location, Phone).
3. In the Battery section, select No Limits.
4. In the Other Permissions section, activate the Display over other windows.

💡

If the watch displays latency notifications after you connect, try disabling MIUI Optimization in the developer settings (Settings → About Phone → MIUI version – tap 7 times, then go back to Additional → For Developers and turn off optimization).

Step-by-step instructions for connecting Huawei watches to Xiaomi Redmi

Now, to the synchronization process itself, the instructions are good for most watches, but if your device doesn't connect, check the problem-solving section.

Step 1: Installation of Huawei Health App

Download the official Huawei Health app from Google Play or AppGallery (if you have Huawei Mobile Services installed). Avoid APKs from third-party sources - they may contain outdated versions or malicious code.

After installation:

1. Open the application and accept the terms of use.
2. Register for a Huawei ID account (if not) or sign in to an existing one.
3. Press Devices. → Add the device.

Step 2: Activate the pairing mode on the clock

Depending on the model, the process may differ:

• 🕒 Huawei Watch GT 3/4: Press the power button on 3 seconds → Select Connect the phone.
• 🏃 Huawei Watch Fit 2/3: Swipe up the screen. → Settings → Bluetooth → Searching for devices.
• 📿 Huawei Band 6/7/8: Touch the touch button. → Connect.

Step 3: Connecting via Bluetooth

On the Huawei Health app:

1. Choose your watch model from the list.
2. Confirm pairing on the clock (it may be necessary to enter a code, usually 0000 or 1234).
3. Wait until the synchronization is complete (it can take up to 5 minutes).

Setup of notifications and data synchronization

Once successfully connected, you need to configure notifications and health data synchronization. Huawei Health by default blocks some features on non-Huawei phones, so manual setup is required.

Incorporation of notifications

To keep the clock showing incoming calls and messages:

1. At Huawei Health, go to Device → Notifications.
2. Activate switches for Calls, SMS and the desired messengers (WhatsApp, Telegram, etc.).
3. In your phone settings (Settings → Notifications → Additional), allow Huawei Health to access notifications.

💡

On Xiaomi Redmi with MIUI 13+, notifications may not arrive due to the Privacy Notifications feature. Turn it off in Settings → Notifications → Privacy or add Huawei Health to exceptions.

Synchronization of health data

For the correct display of steps, sleep and pulse:

• 📊 At Huawei Health, go to Profile → Settings → Synchronize data and enable automatic synchronization.

If you use Google Fit or Mi Fitness, set up integration:

1. At Huawei Health, go to Profile → Settings → Connected Services.
2. Select Google Fit and log in.
3. Allow data export (steps, sleep, pulse).

Solving Typical Connection Problems

Even when you set it up properly, you can have errors, and below are the most common problems and ways to solve them.

⚠️ Note: If after all the manipulations of the watch Huawei Watch GT 4 or Watch D still not connected to Redmi Note 12, try resetting the clock to factory settings (Settings) → System system → Resetting.This will delete all data from the clock, but often solves compatibility issues.

Alternative ways to connect (if the standard one does not work)

If the official Huawei Health app refuses to work with your Xiaomi Redmi, there are workarounds:

1. Use of third-party applications

For older watches (such as the Huawei Band 3 Pro or Watch GT 1) you can use:

• 📱 Notify & Fitness for Huawei – Supports notifications and basic synchronization.
• 🔗 Tools & Mi Band – an alternative for fitness trackers.

Cons: These apps may not support all features (e.g., Watch D pressure measurement).

2. Connect via Mi Band Master (for fitness bracelets)

If you have a Huawei Band 6/7, try:

1. Install Mi Band Master from Google Play.
2. In the application settings, select Another Device → Huawei Band.
3. Follow the pairing instructions.

This solution is suitable for basic display of steps and notifications, but does not guarantee the operation of all sensors.

Manual connection via ADB (for advanced users)

If MIUI blocks Huawei Health’s background work, you can manually disable ADB optimization:

adb shell dumpsys deviceidle whitelist +com.huawei.health

This command adds the application to the whitelist, preventing it from being shut down by the system, and you need ADB Tools and the developer mode on the phone to execute the command.

Optimizing the work of Huawei watches with Xiaomi Redmi

To keep the connection stable and the data synced without delay, follow these tips:

• 🔋 Power Saving: Turn off battery optimization for Huawei Health and Bluetooth in settings MIUI.
• 📶 Autosynchronization: Enable automatic data synchronization in Huawei Health (Profile) → Settings → Synchronization of data).
• 🛡️ If you use Mi Security, add Huawei Health to the exceptions.

⚠️ Note: Xiaomi Redmi with MIUI 14 and Android 13 may conflict between Huawei Health and Mi Fitness.If steps are duplicated or missing, disable sync with Mi Fitness in Xiaomi account settings.

For NFC watches (such as the Huawei Watch GT 4), check for Mi Pay compatibility:

• 💳 At Huawei Health, go to the Device → Contactless payments.
• 📱 Open Mi Pay on your phone and add the same card as on your watch.
• ⚠️ On Redmi with MIUI Global this feature may not work – you will need firmware MIUI China.

FAQ: Frequent questions about connecting Huawei to Xiaomi Redmi