Owning devices from different ecosystems is often a question for users, especially when it comes to wearable electronics.The situation when Xiaomi smartphone and Huawei watches do not see each other is common, but solvable. Modern Android operating systems have enough flexibility for cross-platform interaction.
Successful integration of gadgets depends on the correct preparation of the software. You do not need to be a technician to establish a stable connection between devices. The process takes a few minutes and requires only attention to the details of the configuration.
In this article, we’ll look at all the nuances of pairing, from finding an app to fine-tuning notifications, and learn how to avoid typical errors when you first start.
Preparing smartphones for primary pairing
Before you start the active setup phase, you need to do a series of preparatory steps: Wireless interfaces should be active and ready to go. Turn on Bluetooth and GPS (geolocation) in the notification curtain of your Redmi 9. Without geo-position activation, many watch models can refuse scanning.
Also make sure that the battery level on both devices is at least 50%. interruption of the process due to discharge can lead to errors in writing pairing profiles.
Check the version of the MIUI operating system. For stable operation, it is recommended to use the current version of the firmware available for your model. Updates often contain security patches for Bluetooth protocols.
- 🔋 Charge your watch and smartphone to at least 50%.
- 📡 Turn on Bluetooth and GPS fast-set.
- 🔄 Check for Android system updates.
- 📶 Make sure you have a stable Wi-Fi connection.
⚠️ Note: If you have previously paired with another phone on your watch, be sure to reset your watch through the menu or reset button before you try again.
Installation and configuration of Huawei Health app
A key element of the Huawei ecosystem is the Huawei Health app (or Zdorov'e). For Xiaomi users, a standard search in Google Play may not give the desired result, since Google services limit the functionality of some of the manufacturer's applications.
Use the built-in scanner. QR-codes or browsers to go to the official Huawei support site, where you will find the current version of the AppGallery installer or direct APK-Installation from unknown sources requires security confirmation MIUI.
Once installed, launch the app and log into your Huawei ID account. If you don't have one, it takes a couple of minutes to sign up. Without authorization, synchronization of health and activity data will not be possible.
The system will request a number of permissions to work correctly, the background and access to notifications are critical parameters, without which the application will be "unloaded" from memory, and the data will cease to be updated.
☑️ Pre-installing check
The interface of the application may vary depending on the version, but the logic of the work remains the same. The Device tab is designed specifically to add new electronics.
The process of searching and connecting the device
Open the Huawei Health app and go to the Devices tab. Click Add or "+" In the upper right corner, the system will suggest scanning. QR-code or select a device from a list. For manual search, select "Scanner" or find your model in the list.
At that point, the watch will be asked to pair with the confirmation code. Check the numbers on the Redmi 9 display and on the watch dial. If the codes match, click "Connect" or "OK."
The initial synchronization process can take anywhere from 1 to 5 minutes, which is when encryption keys are exchanged and basic dials are loaded, and you don't have to move the devices away from each other very far.
What to do if the search does not begin?
After a successful connection, the application will offer to update the firmware of the watch. the firmware often contains improvements in the stability of the Bluetooth module, so this step is better not to miss.
Configure permissions and background work in MIUI
The MIUI operating shell on Redmi 9 is known for aggressive battery saving: it can force the Huawei Health app to close, causing the clock to be disconnected, and you need to manually set up autostart and work in the background.
Go to Settings → Applications → All apps. Find it in the list of Huawei Health. Click on Autostart and activate the switch, which will allow the application to run with the system.
Next, go to "Battery Savings." Select "No Limits" option, which will prevent the system from "killing" the sync process even if the phone's screen is dead. Without this setting, notifications may come with a delay.
💡
Add the Huawei Health widget to the Redmi 9 desktop, which will help the system consider the app active and less likely to suspend its operation to save energy.
Also check permissions. Search the App menu for Permits and make sure that access to physical activity, location, contacts and phone is enabled. Denial of phone access will prevent the clock from displaying the caller's name.
Synchronization of notifications and functions
After the basic setup, you should personalize. In the app, go to the connected watch card and find the Notifications section. Here you can choose which apps will duplicate their messages on the wrist.
The Redmi 9 is a feature that if you read a message on your phone, it can disappear from the clock, or vice versa. MIUI and versions of the Huawei Health app.
You can also set up music management, phone search and alarm clocks. The voice assistant on the watch may not work or work limited, as this depends on the regional account settings and the version of the watch.
| Function | Status on Redmi 9 | Commentary |
|---|---|---|
| Notifications for messengers | It's working. | Permission to read notifications is required |
| Incoming calls | It's working. | It can be reset by the system when there is a lack of memory. |
| Responses to communications | Limited. | Depending on the model of the watch, text cannot be entered |
| Synchronization of contacts | It's working. | Requires full access to the phone book |
Remember that some functions, such as weather or time synchronization, require periodic network access, and the watch receives this data via the phone.
Typical Compatibility Problems
Despite Bluetooth standards, there are sometimes conflicts, and if your watch doesn't sync, the first thing you do is check if Health is asleep, open it by force, and wait for the data to update.
A common problem is time desynchronization. If the clock is showing the wrong time, check the date and time settings on Android itself. They should be in Auto mode. Forced time setting on the clock is often blocked by the system.
If nothing works, try removing the device from the app and removing it from the Bluetooth list in your phone's settings. Then pair it again like the first time. This clears the cache of the connection profiles.
💡
90% of connectivity problems are solved by properly configuring MIUI’s power saving and permissions, not hardware malfunction.
In rare cases, it may be necessary to completely reset the clock to factory settings, and do this only if software methods have not helped restore stable communication.