How to connect Huawei smartwatches to Xiaomi Redmi Note 10 Pro: a complete guide with error solutions

Synchronizing Huawei’s smartwatch with Xiaomi’s Redmi Note 10 Pro is a task that seems simple at first glance, but often raises questions among users. The main difficulty lies in ecosystem differences: Huawei uses its own software (Huawei Health), and Xiaomi uses its own software (Huawei Health), and Xiaomi — MIUI In this article, we will not only examine the standard connection process, but also the nuances that will help avoid typical errors, from Bluetooth problems to application version conflicts.

It is important to understand that Redmi Note 10 Pro works on Android-based 11/12 (depending on the firmware version), and Huawei watches (for example, Watch) GT 3, Band 7 or watch fit 2) If you have previously tried to connect devices and encountered an error "Can not find the device" or "Communication interrupted" - in the article there are solutions for these cases. We will also look at alternative ways to sync through third-party apps if the official method doesn’t work.

1. Preparation of the Xiaomi Redmi Note 10 Pro phone for connection

Before you start syncing, you need to configure Xiaomi smartphone to work correctly with the Huawei Health application.

• 📱 Update the firmware MIUI: Go to Settings. → The phone. → Update the system and install the latest security patches, which will eliminate possible conflicts with Bluetooth.
• 🔄 Reset your network settings (if you have previously had connection issues): → SIM-maps and mobile networks → Resetting Wi-Fi, Mobile Internet and Bluetooth settings.
• 🛡️ Allow installation from unknown sources: For download APK-Huawei Health file (if the app is not available on Google Play for your region). → Annexes → Special rights → Installation of unknown applications → select the browser.
• 📴 Turn off power saving mode for Bluetooth: Settings → Battery and productivity → Energy saving regime → Settings → Disable optimization for Bluetooth.

Pay special attention to the permissions for the application. After installing Huawei Health, go to Settings → Annexes → Application management → Huawei Health and turn it on:

• 📍 Geolocation (for accurate tracking of activity).
• 📱 Auto-run (to make the application run in the background).
• 🔋 Ignoring battery optimization (otherwise, the connection will be broken).

⚠️ Note: If your Redmi Note 10 Pro has global firmware installed MIUI With regional restrictions (e.g. China), the Huawei Health app may not appear on Google Play. APK from the official Huawei website or a trusted source (e.g. APKMirror).

2. Installation and configuration of the Huawei Health app

The official Huawei Health app is the only supported way to connect Huawei watches to your phone, but installing it on Xiaomi has nuances:

1. Downloading: 🌍 If Google Play is available: Find Huawei Health in the store and install it. 📥 If the application is not available: download APK With Huawei AppGallery or APKMirror (choose the Android 11 version)+).

Account registration:

First startup requires you to create or log in to Huawei ID. If you don't have an account, sign up via email or phone number. ID Synchronization of data (steps, pulse, sleep) will not work.

Permit settings:

After installation, open Settings. → Annexes → Huawei Health → Permits and turn on:

• 📱 Notifications (to display alerts on the clock).
• 📍 Geodata (for maps and data) GPS-tracking).
• 📞 Contacts and calls (if you need call notifications).

If the app does not see the clock after installation, check:

• 🔄 Reboot your phone and watch (sometimes Bluetooth cache reset helps).
• 📱 Remove previously paired devices in Settings → Connected devices → Bluetooth.
• 🔋 Charge hours (if the charge is below 20%, the connection may not work).

3. Step-by-step instructions for connecting the clock

When all preparations are complete, we start synchronizing. GT, Band, Watch Fit and Redmi Note 10 Pro:

1. Activate Bluetooth on your phone: Go to Settings → Bluetooth and turn it on. Make sure Visibility for All mode is activated (2-3 minutes).
2. Launch Huawei Health: Open the app, click Devices (watch icon at the bottom of the screen) → "Add the device".
3. Select a watch model: Find your model in the list (e.g. Huawei Watch) GT 3) and click on it. If there is no model, select "Other device".
4. Confirm the connection on the watch: A code (e.g., 1234) will appear on the watch screen. Compare it to the code in the app and click "Confirm".
5. Wait for sync: The process can take 5-10 minutes. Don't interrupt or leave the application. When it's done, the "Device is connected" notification will appear.

If you have a “failed to contact the device” error during the connection step, try:

• 🔄 Restart Bluetooth on your phone (turn off/on).
• 📱 Remove the watch from the list of devices in Huawei Health and try again.
• 🔋 Reset the watch to factory settings (if it was previously paired with another phone). → System system → Data resetting.

⚠️ Note: Redmi Note 10 Pro with firmware MIUI 13+ Automatically disabling background processes for Huawei Health can trigger this. To avoid this, add the app to Settings → Battery → Energy saving regime → Applications without restrictions.

4. Set up notifications and data synchronization

Once successfully connected, you need to configure notifications and synchronize health data, without which the watch will only work as a pedometer, without alerts for calls and messages.

How to enable notifications:

1. Open Huawei Health → Choose your watch → "Notifications".
2. Turn on the "Allow Notifications" switch.
3. Select the apps you want to see on your watch (e.g. WhatsApp, Telegram, Calls).
4. In the settings MIUI Go to Settings. → Notifications → Huawei Health and turn on "Show Notifications".

Synchronization of health data:

• 🩺 Steps and Activity: Automatically synced every 30 minutes (with active Bluetooth).
• ❤️ Pulse and Sleep: Data is updated when you open the Huawei Health app or manually (pull down on the app's home screen).
• 🏃 Training: For precise GPS-Tracking enable “Accurate Location” in the phone settings.

If notifications don’t arrive at the clock, check:

• 📵 Is there a "Do Not Disturb" mode on your phone or watch.
• 🔕 Huawei Health Permits (notifications and auto-runs must be included).
• 📱 Settings of a specific messenger (for example, Telegram needs to allow notifications in chat settings).

💡

If notifications are duplicated (both on the phone and on the clock), disable them for a specific application in the settings. MIUI: Settings → Notifications → [Annex] → Disable duplication.

5. Solving typical connection problems

Even with the right setup, Redmi Note 10 Pro users may encounter errors, and consider the most common and ways to fix them:

🔴 Error: “Unable to connect to the device"

Causes and solutions:

• 📱 Bluetooth version conflict: Update the firmware of the phone and watch. Redmi Note 10 Pro should have MIUI 12.5+.
• 🔄 Bluetooth Cache Failure: Clear the Cache in Settings → Annexes → System applications → Bluetooth → Warehouse → Clear the cache.
• 🔋 Low Charge: Charge must be at least 30%. Connect the watch to charge for 10 minutes and try again.

🔴 Error: “The device is not supported"

This error occurs if:

• 📱 You are trying to connect an old watch model (like the Huawei Band 3) to a new version of Huawei Health.Solution: download the old version of the app (like 11.0.5.300).
• 🌍 Solution: change region to Huawei ID "China" or "Europe".

🔴 Problem: The clock is connected, but the data is not synchronized

Check it out.

• 📶 Internet connection (health data synced via Huawei cloud).
• 🔄 Background activity of Huawei Health: in battery settings, turn off optimization for the app.
• 📱 Watch firmware version: Update via Huawei Health ("My devices" → [Your watch] → "Update of the PO").

⚠️ Note: If after updating the firmware watch they stopped connecting, reset to factory settings (Settings) → System system → Resetting the data on the clock, which will delete all local data, but restore compatibility with the phone.

💡

Most connectivity problems are solved by clearing the Bluetooth cache on the phone and resetting the clock to factory settings.

6. Alternative ways to connect (if Huawei Health is not working)

If the official Huawei Health app refuses to connect the watch to the Redmi Note 10 Pro, you can use third-party solutions.

🔹 Notify & Fitness for Huawei

This unofficial software supports most Huawei models and allows you to:

• 📱 Receive notifications of calls and messages.
• 🩺 Track your steps, sleep and pulse (data taken from Google Fit).
• 🔋 Customize the vibration and screens of the clock.

How to determine:

1. Download APK from the official website.
2. Set and grant all permissions (including “Overlapping Other Applications”).
3. In the application settings, select the watch model and activate synchronization.

🔹 Amazon Huawei App (for users outside of China)

If Huawei Health is not available in your area, try:

1. Download Huawei Mobile Services (HMS) from AppGallery or APK.
2. Install Huawei Health through HMS (This is bypassing regional restrictions).
3. Reboot the phone and reconnect.

⚠️ Important: Third-party applications may:

• 🛑 Not supporting all functions of the watch (e.g, GPS payment).
• 🔋 Quickly drain the battery due to background activity.
• 📱 Conflict with MIUI, Bluetooth-inducing.

7. Optimize the work of the watch with Xiaomi Redmi Note 10 Pro

To ensure that Huawei watches work consistently with the Redmi Note 10 Pro, follow these tips:

🔋 Extension of battery life

• 📴 Turn off constant pulse sync (in Huawei Health, choose the 10-30 minute interval instead of the continuous pulse sync).
• 📵 Reduce the brightness of the watch screen to 60-70%.
• 🔄 Disable notifications from unnecessary apps (such as games or news services).

📶 Improved connection stability

• 📱 Add Huawei Health to battery optimization exceptions (Settings) → Battery → Energy saving regime → Applications without restrictions).
• 🔄 Enable “Constant Bluetooth Retention” in Developers MIUI:
• 📴 Reconnect the clock every 2-3 days (this resets possible cache errors).

🛡️ Data protection

Huawei watches sync health data with Huawei’s cloud to ensure privacy:

• 🔐 Set up two-factor authentication for Huawei ID.
• 📱 Turn off automatic data upload to the cloud (in Huawei Health) → "Profile" → "Cloud settings").
• 🔄 Export your data to Google Fit or Apple Health regularly (if you plan to change ecosystems).

💡

For maximum stability, turn off power saving for Huawei Health and enable permanent Bluetooth retention in the developer settings.

FAQ: Frequent questions about connecting Huawei watches to Xiaomi