How to connect the Amazfit smartwatch to the Xiaomi smartphone: full instructions with solutions to problems

The Amazfit smartwatch and Xiaomi smartphones are the perfect combination for those who appreciate a tech-friendly approach to health and activity. However, the process of synchronizing them sometimes raises questions among users, especially if it is about the first settings. In this article, we will discuss not only the standard connection procedure, but also the nuances that will help to avoid common errors.

It’s important to understand that device compatibility is not just a function of the watch model, but also of the firmware version of the phone. For example, the Amazfit GTR 4 or Bip 5 may require different versions of the Zepp app (formerly Mi Fit), and the Xiaomi 13 Ultra or Redmi Note 12 may have slightly different settings, and we’ve taken these into account to make sure that the instruction is suitable for most device combinations.

If you've tried to connect your watch before, but you've encountered an error like "Device failed" or "Sync interrupted," don't rush to reset your settings. At the end of the article, there's a section on solutions to typical problems, where you'll find specific steps for your case.

1. Preparing Xiaomi phone for connection

Before you start syncing, make sure your smartphone is ready to work with Amazfit. This will save you unnecessary problems during the connection stage.

Basic requirements:

• 📱 Android Version: No less than 6.0 (most Amazfit models require Android 8.0)+). You can check the version in Settings → The phone. → Android version.
• 🔄 System Updates: Install the latest security patches. On Xiaomi, it's done through Settings → Updating the system.
• 📶 Bluetooth: Must be enabled and visible for other devices. → Connections → Bluetooth.
• 🛡️ Permissions: Zepp will need access to location, contacts, and notifications.

Pay special attention to energy saving. Xiaomi can block background activity of applications by default, which leads to a break in communication with the clock.

1. Open Settings → Applications → Application Management.
2. Find Zepp in the list and select Battery → Without restrictions.
3. Activate the AutoRun option for this application.

💡

If the clock is often turned off after connecting, add the Zepp app to the list of “Secure Apps” in the Xiaomi battery settings. This will prevent the program from being forced to close by the system.

2.Installation and configuration of the Zepp application

The Zepp app (formerly Mi Fit) is the official Amazfit watch management software, which can be downloaded from Google Play or AppGallery (for Huawei users), but the first option is optimal for Xiaomi.

Step-by-step installation:

1. Download Zepp from the link.
2. After installation, open the app and register (you can use Google, Facebook or email).
3. Select the region of Russia (or your country) – it is important for the correct operation of synchronization servers.
4. Click Add Device and select the model of your Amazfit watch from the list.

If your model doesn't appear on the list, update the app or check if it's officially supported. For example, the Amazfit T-Rex 2 or GTS 4 Mini may require the latest version of Zepp.

Download the Zepp| app Sign up/ log in to your account | Turn on Bluetooth on your phone | Turn off power saving mode for Zepp| Select the right region in the settings-->

3. Step-by-step connection of the Amazfit watch to Xiaomi

Now, to the synchronization process itself, make sure that the Amazfit watch is at least 50 percent charged, which will prevent a sudden shutdown during setup.

Instructions:

1. Turn on the watch by pressing and holding the side button (for most models) and the Amazfit logo will appear on the screen.
2. In the Zepp app, click Add Device → Select your model → Connect.
3. The phone will be asked to enable Bluetooth and geolocation – allow both requests.
4. Wait for the app to find the clock. QR-code.
5. Confirm the pairing on the clock (usually by pressing a button or tapping the screen).
6. Wait until the data synchronization is completed (it can take up to 5 minutes).

If the clock is not determined by the app, try rebooting the phone’s Bluetooth module: turn it off and back on in the settings, then re-search the device.

GTR 4|GTS 4|Bip 5|T-Rex 2|Another model |I don't know-->

4. Notification setting and data synchronization

After a successful connection, you need to configure notifications and data synchronization so that the watch displays incoming calls, messages and activity tracking.

How to set up notifications:

• 📞 Calls: Go to Zepp to Device Profile → Notifications → Calls and activate the option.
• 💬 Messages: Include notifications for SMS, WhatsApp, Telegram and other messengers in the same section.
• ⚙️ Exceptions: If notifications don't come, check Do Not Disturb on your phone and permissions for Zepp.

Synchronization of data:

• 🏃 Steps and Activity: Data is automatically updated every 30 minutes when connected to a phone.
• 🩺 Health: Monitoring sleep, pulse and oxygen levels requires a constant connection to Zepp.
• 🔄 Manual sync: pull the screen down in the app to update data manually.

Some Xiaomi models (such as the POCO X5 or Redmi 10) may require additional auto-run settings for Zepp, otherwise notifications will come with a delay.

5. Common mistakes and their solutions

Even with the right setup, users sometimes run into problems.-5 errors and ways of eliminating them.

If none of these methods worked, try resetting the clock to the factory.

1. On the clock go to Settings → System → Reset.
2. Confirm the action (usually hold the 10 seconds button).
3. Repeat the connection procedure again.

💡

Before resetting your watch, export your training data to the Zepp app to avoid losing statistics.

6. Optimize the work of Amazfit watches with Xiaomi

To ensure that the watch is stable and does not discharge the phone, follow these tips:

• 🔋 Battery: Turn off continuous heart rate monitoring if you don't need it, saving up to 30 percent of your hours of charge.
• 📶 Connection: If the clock is often turned off, add Zepp to the list of Priority apps in battery settings.
• 🛠️ Updates: Check out Zepp’s firmware updates regularly – they improve Android compatibility.
• 🔒 Security: Set up screen lock on the clock to avoid accidental pressing.

For Xiaomi users with MIUI shell, it is useful to know that the system aggressively optimizes background processes.

⚠️ Note: If the clock is no longer synced after the update MIUI, Try to roll back the Zepp app to the previous one. Sometimes newer versions contain bugs that are incompatible with the latest Xiaomi patches.

7. Alternative ways of connecting (without Zepp)

In rare cases, the official application may not work (for example, on custom firmware or outdated versions of Android), then you can use alternative methods:

Method 1: Notify & Fitness

• Download Notify & Fitness from Google Play.
• Connect the clock through Settings → Connect the device.
• Set up notifications and synchronization manually.

This app supports most Amazfit models, but may not provide full functionality like Zepp.

Method 2: ADB-Teams (for advanced users)

If the clock is defined by the system but not connected, you can manually tie it via ADB:

adb shell am start -a android.bluetooth.device.action.PAIRING_REQUEST -e android.bluetooth.device.extra.DEVICE [MAC- watch address

Find out. MAC-The address of the clock can be accessed via a Bluetooth scanner (e.g., the nRF Connect app).

⚠️ Attention: Use ADB requires on-set debugging USB It can cause failures if the commands are incorrectly entered.

Frequently Asked Questions (FAQ)