Synchronizing wearable electronics with the main smartphone is often questionable, especially when it comes to interoperability between different generations of devices.The owner of Xiaomi Redmi 8 may find it difficult to link it to the tracker Mi Band 2, as it is an older model of the bracelet.However, thanks to the backward compatibility and versatility of the Android operating system, this process is quite real and does not require deep technical knowledge.
Successful connection requires taking into account the software and the right sequence of actions. Errors in the initial configuration stage often lead to the fact that the gadget is no longer detected by the system. In this article, we will examine every step in detail, from preparing applications to solving specific problems that arise on the bundle of Redmi 8 and Mi Band 2.
Make sure your smartphone is charged and the fitness bracelet itself has sufficient energy. If the indicator on the tracker flashes or does not light up, first put it on charge through a special cable. Only after the equipment is fully prepared can you go to the software part of the setup.
Preparation of software and applications
The first and most critical step is to install the right software. For the Mi Band 2 model, the classic and most stable solution remains the Mi Fit app, which was later renamed Zepp Life. Xiaomi smartphones like Redmi 8 often preinstalled the GetApps app store, but to ensure the relevance of the version, it is better to use the Google Play Store or the official manufacturer's website.
Installing third-party analogs can lead to unstable notifications and missing steps. The MIUI system installed on your Redmi 8 has aggressive power saving settings that can block the tracker, so it is important not only to download the application, but also to immediately provide it with all the necessary permissions.
⚠️ Warning: Do not try to connect the bracelet directly through the standard Bluetooth menu in the Android settings.This will result in a pairing error and the device will become unavailable for the application until the Bluetooth settings are completely reset.
After installing the Zepp Life (Mi Fit) app, sign up or log in to your Xiaomi Account.This is necessary to save statistics in the cloud. Make sure that the Android version on your Redmi 8 is updated to the latest available, as older versions may have vulnerabilities in data protocols.
The process of initial pairing of devices
Launch the app you have installed and go to the Profile tab, and at the top of the screen you'll see the Add Device button. Click on it and select from the bracelet category list. In the model list that appears, find and select Mi Band 2.
Now the app will go into search mode. At this point, pick up the bracelet and press the touch button to activate the screen. If the bracelet is in sleep mode, it may not immediately respond to a search request, so periodically touching the sensor will speed up the detection process.
- 📱 Make sure Bluetooth on Redmi 8 is enabled and visible to other devices.
- 📍 Keep your bracelet and smartphone at a distance of no more than 1 meter from each other.
- 🔋 Check that the bracelet charge is more than 20% for stable operation.
When your bracelet with a code or vibration signal appears on your smartphone screen, confirm the pairing. On the Mi Band 2 screen, a communication confirmation request may appear, which must be received by touching the sensor. The process of establishing a secure connection can take from 10 to 30 seconds.
☑️ Checklist of successful connection
Configuring permissions in the MIUI system
The MIUI shell on Redmi 8 is known for its strict background management policy, so that notifications from messengers and calls come to the wrist and data synchronization is not interrupted, you need to perform a number of manual adjustments, without which the system can “kill” the application process to save energy.
Go to your smartphone settings, find the Apps section, and select All Apps. In the list, find Zepp Life (or Mi Fit). You will need to enable auto-start and remove background activity restrictions, which ensures that the tracker is permanently linked to the smartphone.
| Setup parameter | Where to find out. | Recommended value |
|---|---|---|
| Auto-start | Annexes → Permits | Included. |
| Background mode | Saving energy | No restrictions. |
| Notifications | Notifications | Allow everything |
It's also important to check the geolocation rights, although you don't need a bracelet. GPS To determine the location, the Bluetooth Low Energy protocol requires the switch on. GPS-- a stable connection module, make sure that the geolocation is active when paired and used.
⚠️ Note: If you turn off your work permit in the background, the synchronization of steps and pulse will only occur when you open the application, and the history of the day may be lost.
Calibration and configuration of notifications
Once you've successfully connected, you can access personalization. From the app menu, go to your Mi Band 2 settings. Here you can customize the information you display, the time format and the units of measurement. For Redmi 8 owners, it's important to set the right number of steps so that motivation doesn't run out on the first day.
Pay special attention to the section “Application Notifications” you can choose which programs will duplicate messages on the bracelet, but do not turn everything on at once: overflowing the memory buffer of the bracelet can lead to delays or incorrect text selection.
- 📞 Incoming calls: displays contact number or name.
- 💬 SMS and messengers: shows the text of the message (up to a certain number of characters).
- 📅 Calendar and alarm clock: vibration at the occurrence of an event.
The notification language on the Mi Band 2 is limited. The device supports mainly English and Chinese for displaying text messages. Russian characters can be displayed incorrectly or replaced with squares, which is a hardware limitation of this model, not a Redmi 8 error.
💡
Third-party modifier apps can be used to display Cyrillic on the Mi Band 2, but they require complex configuration and do not guarantee stable operation.
Solving Typical Connection Problems
Even if you follow all the instructions, there may be a crash. Often users are faced with a situation where Redmi 8 "sees" the bracelet but can not complete (pair). In this case, the first thing you can do is to clean the Bluetooth cache. To do this, go to Settings → Applications → Show system processes → Bluetooth → Clean.
Another common problem is time desynchronization: If the watch on the wristband is lagging or in a hurry, check the time zone in the app. Sometimes forced synchronization helps: pull the screen of the main menu of the application down until the update indicator appears.
If the bracelet has stopped responding to touch or the screen is not burning, it may be “hanging”, in which case a reboot will help. Put the device on charge for 10-15 minutes. If this does not help, you will need a complete reset through the application or, in extreme cases, through the menu of the brace itself (if it is available).