Connecting Xiaomi bracelet to Samsung phone: full instructions with solutions to typical errors

Xiaomi fitness bracelets (Mi Band, Smart Band Pro series) have become an integral part of the daily lives of millions of users thanks to the combination of functionality and affordable price. However, Samsung smartphone owners often face difficulties in trying to synchronize devices from two different ecosystems. In this article, we will examine not only the standard connection procedure, but also the nuances associated with the features of the One firmware. UI, Android restrictions 13/14, We also provide practical recommendations for eliminating common errors.

Conflict between MIUI (Xiaomi firmware and One UI (Samsung’s shell can be manifested as an inability to detect the bracelet, data transmission failures or lack of notifications, often caused by background power saving restrictions, conflicting permissions or outdated versions of the Mi app. Fitness/Zepp We tested the connection on Galaxy models. S23 Ultra, Galaxy A54 Galaxy Z Flip5 With the latest updates – all steps are relevant for Android 12-14.

Particular attention will be paid to bypassing the blocking of notifications from third-party applications in One UI, Because Samsung aggressively filters the background, which prevents the bracelet from working properly, if you've tried to connect the device before and you've got a "Device Can't Find" or "Synchronization Interrupted" error, there are specialized solutions for these cases.

1. Preparing Samsung smartphone for connection

Before syncing, you need to make sure your Samsung meets the minimum requirements for working with the Xiaomi bracelet.

• 📱 Android Version: Not Lower 8.0 Oreo (for Mi Band) 5/6/7/8 Android required 9+). You can check the version in Settings → Telephone information → Android version.
• 🔋 Battery charge: At least 20% charge on the bracelet, 30% charge on the phone, low charge can interrupt the pairing process.
• 📶 Network: stable Wi-Fi or mobile internet connection (required to download bracelet firmware).
• 🔒 Permits: Turn off VPN Antiviruses (such as McAfee or Avast) that can block Bluetooth connections.

Important: Samsung defaults to limit the operation of background applications through the Battery Optimization feature, which often causes the bracelet to shut down minutes after synchronization, to avoid problems:

1. Go to Settings. → Maintenance of the device → Battery.
2. Press. ⋮ (three-point) → Settings → Applications not optimized for battery.
3. Select All Apps and add to the Mi Fitness or Zepp Life list.

⚠️ Attention: On Galaxy models S22/S23 one UI 5.1+ If the item "Applications not optimized..." is not available, use an alternative method: Settings → Annexes → Mi Fitness → Battery → Optimize battery use → Shut down.

Installation and configuration of the official annex

To connect the Xiaomi bracelet to Samsung requires an official application, depending on the model of the bracelet, this can be:

• 🏃 Mi Fitness - for Mi Band 3/4/5/6 Older versions of the Smart Band.

Download the applications only from official sources:

• 🤖 Mi Fitness on Google Play
• 🤖 Zepp Life on Google Play

After installation:

1. Launch the app and sign up via Xiaomi Account, Google or Apple ID.
2. Select the region of Russia (or your country) – this affects the available features (for example, the website, NFC pay).
3. Enable all permissions requested: Location, Notifications, Bluetooth, Physical Activity.

⚠️ Warning: If you register for an error "This device is not supported", check if the phone has root or custom firmware installed. Samsung blocks some features on modified devices.

Download the official application (Mi) Fitness/Zepp Life)|Shut down. VPN and antivirus|Give all permissions to the appendix|Disable battery optimization for Mi Fitness|Charge the bracelet and phone-->

3. Step-by-step instruction for pairing the bracelet

When you're done, we're going to the main stage of the interface, and follow the instructions in the steps.

1. Bluetooth Activation: On your phone, turn on Bluetooth in the notification panel or through Settings → Connections → Bluetooth. Make sure that Visibility for All mode is on (on the 2-3 minute).
2. Launch the application: Open Mi Fitness/Zepp Life and click "Add device" (Icon "+" top-right).
3. Select your bracelet model: Find your model (e.g. Mi Smart Band 8) and confirm your choice.
4. The bracelet will appear on the bracelet QR-code or 6-digit code. Scan it with the app or enter the code manually.
5. Firmware Update: If an update is available, confirm it. Do not interrupt the process - this may lead to a "brick" of the bracelet (you will need to reset through the button clips).

A tick will appear on the bracelet screen ✅ — This means a successful connection. If the process is stuck in the "Device Search" phase":

• 🔄 Reboot Bluetooth on your phone (turn off/on).
• 📱 Re-launch the Mi Fitness app.
• 🔋 Remove the bracelet from the charger (sometimes) USB-connection prevents the connection).

4. Notification setting and data synchronization

After successful connection, you need to configure notification transfer from Samsung to the bracelet. UI It blocks the background activity of third-party applications, so:

1. Notifications Resolution: Go to Settings → Notifications → Additional settings → Notifications on the locked screen and enable the option for Mi Fitness.
2. Selection of applications: In Mi Fitness, open a profile → Notifications and select the apps you want to see on your bracelet (e.g. WhatsApp, Telegram, Gmail).
3. Vibration setting: In the same section, adjust the force and vibration pattern. Up to 5 intensity levels are available for the Mi Band 8.

For proper synchronization of steps, sleep and pulse data:

• 📊 Enable Auto Sync in the App Settings.
• 🔄 Set the sync interval: Every hour (recommended) or When manually updated.
• 🛡️ Turn off Traffic Savings in Samsung Settings if you use mobile internet.

💡

If notifications are duplicated (come to both the phone and the bracelet), disable duplication in Notification Settings → Additionally. → Show notifications on connected devices.

5. Solving common mistakes

Even with the right connection, Samsung users often encounter specific bugs.

Error: "Unable to connect to the device" (code 1006)

The reason: the Bluetooth version conflict between Samsung and the wristband.

1. Update the bracelet firmware through Mi Fitness.
2. Turn on the phone mode "Developer" and activate "Debugging by Bluetooth".
3. Remove all previously coupled devices in Bluetooth Settings.

Error: "Server is not available" (code 3001)

Reason: problems with Xiaomi servers or traffic blocking by the operator.

• 🌍 Check your internet connection (try switching from Wi-Fi to mobile data).
• 🔄 Change. DNS 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).
• ⏳ Wait. 10-15 Try again (the servers may be overloaded).

The bracelet is connected but does not show notifications

The reason: Samsung defaults to blocking notifications from "non-system" applications.

1. Go to Settings. → Annexes → Mi Fitness → Notifications → Permission.
2. Enable the option "Show without sound" (otherwise notifications will be duplicated).
3. In Mi Fitness, check that the desired applications are selected in the Notifications section.

⚠️ Note: Galaxy with Android 14 has a new feature called "Background Limitation", which can completely block the bracelet. To turn it off, go to Settings → Annexes → Special access → Optimizing the battery → All applications → Mi Fitness → No restrictions.

💡

If the bracelet is no longer synced after the One update UI, Reset its settings: Bracelet settings → Reset → Confirm. Then re-enable the connection.

6. Optimization of the bracelet with Samsung

To ensure that Xiaomi’s bracelet works consistently on Samsung, follow these guidelines:

• 🔄 Regular updates: Check the bracelet firmware updates in Mi Fitness at least 1 time per month.
• 📴 Saving Charge: Disable unnecessary features (e.g., raising your hand to activate the screen if they are not in use).
• 🛡️ Reset protection: Do not remove the bracelet from Xiaomi accounts – this can lead to data loss.
• 🔋 Charging: Use only the original cable.Non-original chargers can damage the battery.

For advanced users:

• 🔧 Install Xiaomi Wear for advanced features (like custom dials).
• 📊 Use Notify & Fitness to fine-tune notifications.
• 🔄 Set up automatic sync with Google Fit via Settings → Accounts. → Google.

If you are using the Mi Band 8 Or, later, activate the Always-on Display function, but remember that this reduces battery life. 15-20%.

7. Alternative ways of connecting

If the standard method doesn’t work, try alternatives:

Method 1: Connect with Notify & Fitness for Mi Band

This third-party app supports more features than the official software:

1. Download Notify & Fitness.
2. Enable Bluetooth and permissions for the app.
3. Select the bracelet model and follow the instructions on the screen.

Advantages:

• 📊 Support for custom dials.
• 🔔 Flexible notification setting (keyword filtering).
• 🔄 Manual data synchronization.

Method 2: Using Xiaomi Wear

This application is suitable for advanced users:

1. Download APK from the official website (for example, apkmirror.com).


2. Install by allowing installation from unknown sources.




3. Connect the bracelet through Add the device → Mi Band.

Beware: Xiaomi Wear may conflict with Mi Fitness.

Method 3: Connect via Samsung Health (limited)

Samsung Health does not support Xiaomi bracelets directly, but it is possible to export data:

1. Sync your data with Google Fit in Mi Fitness.
2. In Samsung Health, connect Google Fit as a data source.

Limitations:

• ❌ No notifications.
• ❌ No bracelet controls.
• ✅ Only importing step, sleep and pulse data.

8. Frequently Asked Questions (FAQ)