Honor Band fitness bracelets and Xiaomi Redmi smartphones are a popular combination among users who value functionality and accessibility. However, pairing devices from different brands sometimes causes difficulties, from the lack of response to Bluetooth to problems with data synchronization in the Huawei Health application. In this article, we will discuss not only the standard connection procedure, but also the nuances of working with different versions of MIUI, solving typical errors and optimizing interaction between devices.
It’s important to understand that Honor and Xiaomi use different ecosystems, which can affect connection stability, such as the Honor Band 6 and later require a Huawei ID authorization, while older models (Honor Band 4) can work without it, and we’ll take all these features into account to make your connection smooth.
1.Honor bracelets compatible with Xiaomi Redmi phones
Before connecting, check your devices' compatibility. Most Honor Band models (from Band 3 to Band 7) are officially supported by Xiaomi Redmi smartphones, but there are nuances:
- 📱 Redmi Note 10/11/12 Full compatibility with Honor Band 5/6/7 (required MIUI 12.5+).
- 📱 Redmi 9/9A/9C: Possible lags when synchronizing with Band 6 owing to a weak processor.
- 📱 Redmi 8 and older: only support Band 4/5, band 6+ Maybe it's not enough RAM.
- ⚠️ Redmi with custom firmware: possible problems with Google Play services, necessary for Huawei Health.
Pay attention to the Android version: for Honor Band 6/7 requires Android 8.0+, and for Band 4/5 is enough Android 6.0. To find out the version of the OS on Redmi, you can see the Settings menu → About the phone → Android version.
2. Preparing Xiaomi Redmi phone for connection
To avoid pairing errors, perform pre-settings on your smartphone:
- Update MIUI: go to Settings → About Phone → Update system and install the latest security patches. This eliminates Bluetooth bugs in older versions.
- Activate Bluetooth: Enable it in the notification panel or through Settings → Connections and Sharing → Bluetooth.
- Allow geodata: The Huawei Health app requires location access to work properly (even if the GPS bracelet is missing).
- Turn off power saving mode for Bluetooth: in Settings → Battery → Power saving mode add Huawei Health to exceptions.
A critical feature for Redmi with MIUI 13+: In Bluetooth settings, activate the "Show Devices Without Names" option (hidden in Additional Settings → Device Visibility).
☑️ Preparing Redmi for Connection
3. Installation and configuration of Huawei Health app
The official Honor bracelet management app is Huawei Health (formerly called Huawei Wear).
- 📥 Google Play: Link for global versions of Redmi).
- 📥 AppGallery: If your Redmi has a service installed HMS Core (rarely for global models).
- 📥 APK-File: from the official Huawei website (for experienced users only, the risk of blocking the account).
After installation:
- Start Huawei Health and sign up with a Huawei ID (required for Band 6/7). If you don't have an account, create it using the app's prompts.
- From the app menu, select "Devices → Add device → Bracelet".
- Follow the instructions on the screen when the system asks you to turn on Bluetooth and geolocation.
⚠️ Note: If you are registering with Huawei ID The error is "Service is not available in your area", use VPN Connecting to Germany or Spain after creating an account VPN can be turned off.
4. Step-by-step connecting the Honor bracelet to the Redmi
When the preparation is completed, start pairing:
- Activate the bracelet: charge it to 50%+ And press the touch button to turn it on. QR-plug-in.
- Start a search in Huawei Health: In the “Add device” section, select your bracelet model (Honor Band 5, Band 6, etc.).
- Confirm the pairing: When the bracelet appears on the list, tap it. Both devices should display the same 6-digit code, confirm it.
- Update the bracelet firmware: after connecting, the application will suggest installing the latest version of the software. Do not interrupt the process - this can lead to a device failure.
If the bracelet is not present:
- 🔄 Reboot Bluetooth on Redmi: Disable/enable the module in the settings.
- 🔋 Make sure the bracelet is charged (the indicator should flash when connected to the charger).
- 📵 Check if another application is blocking the connection (such as Xiaomi’s Clean Master or Security).
What if the bracelet is connected, but immediately disconnected?
5. Notification setting and data synchronization
After successful connection, set up alerts and synchronization:
| Function | Settings in Huawei Health | Additional Actions on Redmi |
|---|---|---|
| Call notifications | Device → Notifications → Incoming calls | Allow access to contacts in the application settings |
| SMS and messengers | Device → Notifications → Messages (select applications) | Enable “Show notifications” for each messenger in Android settings |
| Stepper and sleep | Health → Data → Autosynchronization | Allow access to motion sensors in Settings → Apps → Permissions |
| Weather. | The device → Weather. → Auto-update | Enable geolocation for Huawei Health in Always mode |
For stable data synchronization:
- 🔄 Enable "Autosync" in the bracelet settings (section "Data").
- 📶 Make sure Redmi has mobile internet or Wi-Fi enabled – without a network, data will not be uploaded to Huawei’s cloud.
- ⏳ Manually sync data 1 time per day: Open Huawei Health, pull the screen down for an update.
💡
If notifications come with a delay, add Huawei Health to "Priority Apps" in Redmi's battery settings.This will prevent delays due to background optimization.
6. Solving common problems
Even after a successful connection, there may be failures, and let's look at typical scenarios and their solutions:
⚠️ Note: If after the update MIUI The bracelet stopped connecting, reset it to factory settings. To do this, press and hold the touch button on the bracelet for 10 seconds until the Honor logo appears.
| Problem. | Possible cause | Decision |
|---|---|---|
| The bracelet is not visible on the list of devices | Conflict with another Bluetooth device | Turn off all associated gadgets in Settings → Bluetooth |
| Synchronization interrupted | Redmi Energy Saving Blocks Background Processes | Add Huawei Health to battery exclusions (see Section 2) |
| No notifications coming. | No access to Android alerts | Check the permissions in Settings → Notifications → Huawei Health |
| Bracelet discharges quickly | Constant synchronization with Redmi in the background | Turn off Autosynchronization and update data manually |
If the problem is not resolved:
- Remove the bracelet from the list of devices in Huawei Health and reconnect.
- Clear the app cache: Settings → Apps → Huawei Health → Storage → Clear the cache.
- Reinstall Huawei Health by saving your account details.
💡
90% of connection problems are solved by resetting your bracelet settings and re-authorizing with Huawei Health.Don't ignore firmware updates - they often contain patches for MIUI compatibility.
7. Optimize the work of the Honor bracelet with Xiaomi Redmi
To make the most of your Redmi bracelet, follow these tips:
- 🔋 Bracelet battery savings: Turn off unnecessary notifications (e.g. from social media) and reduce automatic sync frequency to 1x every 6 hours.
- 📊 Accuracy: To correctly count steps, wear a bracelet 2-3 cm above your wrist and calibrate the pedometer in Huawei Health settings.
- 🔒 Safety: turn on PIN-bracelet code (Device) → Security → Locking the screen to avoid unauthorized access.
- 🎧 Music Management: If your Redmi supports Mi Music or Spotify, set up player control via the bracelet in the Device → Music.
For Redmi users with MIUI 14 and later, Google Fit integration is available:
- At Huawei Health, go to Profile → Settings → Connect Google Fit.
- Log in through your Google account and select the data for synchronization (steps, sleep, pulse).
- Data from the bracelet will now be duplicated in Google Fit, which is convenient for analysis in other applications (for example, Strava).