Xiaomi Mi True Wireless Earphones 2 full instruction with tips and life hacks

Xiaomi Mi True Wireless Earphones 2 (code name) TWS2) have become one of the most popular accessories of the brand due to the combination of high-quality sound, compact design and affordable price. However, many users have difficulty connecting for the first time – the device is not detected, the sound is interrupted or the headphones refuse to sync with each other. In this article, we will analyze all possible ways to pair with different types of devices, as well as give practical recommendations for eliminating typical errors.

The Mi True Wireless Earphones 2 features support for Bluetooth 5.0 with low power consumption (BLE), It's a stable connection up to 10 meters away, but to work properly, it's important not only to connect properly, but also to take into account the nuances of the firmware of the headphones, the compatibility with the operating system and even the features of the features of the device. MIUI If you've just unpacked your headphones or are trying to reconnect them after you reset, this guide will help you avoid common problems.

Preparing headphones for the first connection

Before you pair with your phone or computer, you need to activate the search mode on the headphones themselves. Unlike wired ones, wireless devices require pre-configuration.

• 🔋 Charge the case and headphones. Even if the indicator on the case is green, make sure that the headphones are charged - put them in the case for 10-15 minutes. The headphones should flash red when discharged or burn white when fully charged.
• 📱 Update your smartphone firmware (if you use it) Xiaomi/Redmi/POCO). Old versions MIUI They may not support the protocol. AAC, Which will cause problems with sound.
• 🔄 Reset previous connections. If your headphones have already been paired with another device, remove them from the list of Bluetooth devices on it to avoid conflicts.

Important: Mi True Wireless Earphones 2 automatically go into pairing mode when you first pull them out of the case, and if you've tried to plug them in, but it didn't work, you'll have to reset your headphones.

1. Put both headphones in the case and close the lid.
2. Press and hold the button on the back of the case for 15 seconds until the indicator flashes red and white (this is a reset signal).
3. Remove the headphones from the case – they should automatically turn on and go to search mode (indicators will flash white).

⚠️ Warning: If the headphones are red and don't flash, it indicates battery drain. Charge them in the case for at least 30 minutes before trying again.

Connect to Android smartphones (including Xiaomi)

The process of pairing with Android devices is as simple as possible, but there are nuances for Xiaomi phones with firmware MIUI. Let's look at both options.

Standard method (for all Android devices)

If you have a Samsung, Google Pixel, Realme or any other brand:

1. Open Settings → Bluetooth and activate the module.
2. Remove the headphones from the case – they should appear in the list of available devices like Mi True Wireless Earphones 2 or Mi. TWS 2.
3. Click on the headphone name in the list. In 5-10 seconds, a notification will appear about a successful connection.

After pairing, check that the Bluetooth settings next to the headphone name displays the status "Connected for Media Audio." If the status "Calls Only", go to the additional device settings (cog next to the name) and turn on the option "Media Audio".

Features for Xiaomi smartphones with MIUI

On Xiaomi phones (like Redmi Note 10, POCO X3, Mi 11) the connection process may differ due to proprietary features:

• 🔗 Fast pairing. The first connection may result in a pop-up asking you to install the Mi Earphones app (formerly Mi AIoT). This is not necessary, but the app gives you access to the equalizer and firmware updates.
• 🎧 Automatic switching. MIUI 12+ Headphones can automatically connect to the last device you use. To turn off this feature, go to Settings. → Connected devices → Headphones → Autoconnection.
• 🔊 Sound effects. There is a "Sound" tab in Bluetooth settings where you can turn on Mi Super Audio (enhances bass) or Adaptive Sound (automatically adjusts equalizer).

⚠️ Note: Some Xiaomi models (e.g. Redmi) 9A) There may be no codec support AAC, Sound will be transmitted through SBC Check supported codecs in Bluetooth settings (section "More").

Connecting to iPhone and other Apple devices

While Mi True Wireless Earphones 2 is optimized for the Xiaomi ecosystem, it also works well with Apple devices (iPhone, iPad, Mac).

First, the Bluetooth codec will be default AAC (not SBC, And second, some features, like Mi Super Audio or control gestures, may be limited, and third, you'll still need an Android device to update your headphone firmware.

Instructions for connecting to the iPhone:

1. Open Settings → Bluetooth and activate the module.
2. Remove the headphones from the case and wait until they appear on the list as Mi True Wireless Earphones 2.
3. Click on the headphone name. In a few seconds, it says "Connected."
4. (Optional) Turn on the "Automatic Connection" option so that the headphones connect to the iPhone when removed from the case.

To check the quality of the connection:

• 🎵 Run the music and check that the Control Point (swipe down from the upper right corner) displays the headphone icon with a volume bar.
• 🔊 If the sound is interrupted, try turning off Wi-Fi on your iPhone – sometimes both networks (Wi-Fi and Bluetooth) run at the same frequency and cause interference.

On a MacBook or iMac, the connection process is similar:

1. Open System settings → Bluetooth.
2. Click "Connect" next to Mi True Wireless Earphones 2.
3. If the headphones are not determined, reboot the Bluetooth module on the Mac: hold the Shift + Option and click on the Bluetooth icon in the menu bar, then select Reset Bluetooth module".

💡

On the iPhone, you can turn on notifications about the battery discharge of the headphones. → Bluetooth → i (near the headphones) → Battery notifications.

Connection to Windows and macOS (laptops and PCs)

Matching computers takes more steps than smartphones, especially Windows, and the main problem is that you have outdated Bluetooth drivers or conflicts with other audio devices, and we'll go through both.

Connecting to Windows 10/11

If your PC or laptop is equipped with a Bluetooth 4.2 module or later, there should be no problems. Otherwise, an external Bluetooth adapter may be required (we recommend TP-Link). UB500 or ASUS USB-BT500).

Step-by-step:

1. Open Settings → Devices → Bluetooth and other devices.
2. Click "Add Bluetooth or other device" → Bluetooth.
3. Remove the headphones from the case and wait until they appear in the list. Select Mi True Wireless Earphones 2.
4. Confirm the connection if you have a request to enter PIN-Leave the field empty and click "Connect".

If the headphones are connected, but the sound only goes through the speakers of the PC:

• 🔊 Check what's in the control panel. → Sound headphones selected as "Default Device".
• 🔄 Reboot Bluetooth: Open Task Manager → Services → Bluetooth Support Service and click "Reset".
• 🖥️ Update the Bluetooth driver via Device Manager (find Bluetooth Radio Module, right-click and select Update Driver").

Connect to macOS (MacBook, iMac)

On Apple computers, the process is easier than on Windows, but you may need to manually adjust the audio output:

1. Open System settings → Bluetooth.
2. Make sure the headphones are in search mode (flashing white).
3. Select Mi True Wireless Earphones 2 and click "Connect".
4. After connecting, open System settings → Sound. → Output and select headphones as the output device.

If the sound is interrupted or stuttered:

• 🔋 Close resource-intensive applications (such as Chrome or Zoom) that can put a load on a Bluetooth module.
• 📡 Switch the headphones to Low Lag (if available in macOS settings).
• 🔄 Disable other Bluetooth devices (mouse, keyboard) that may interfere.

💡

Windows. 10/11 For stable headphones, it is recommended to use a Bluetooth adapter with support for aptX Low Latency or AAC. Built-in modules in budget laptops often work only with SBC, which impairs the sound quality.

Solving Connection Problems

Even with the right pairing, there can be errors, and let's look at the most common ones and how to fix them.

If the headphones are connected, but the sound is only in one:

1. Put both headphones in the case and close the lid.
2. Wait 10 seconds, then pull them out - they should sync automatically.
3. If the problem remains, reset the settings (15 seconds button on the case) and connect again.

If the headphones do not connect to the phone after the update MIUI:

• 📱 Remove them from the list of Bluetooth devices.
• 🔄 Reboot the phone.
• 🎧 Reset the headphone settings (15 seconds button on the case).
• 🔋 Check that the phone has enabled “Developer Mode” and disabled the option “Bluetoothbug” (sometimes it blocks the connection).

Update of the headphone firmware

Mi True Wireless Earphones 2 firmware affects connection stability, sound quality and uptime. Xiaomi regularly releases updates, but they are distributed gradually.

On Android (only for Xiaomi smartphones):

1. Install the Mi Earphones app from Google Play.
2. Put the headphones on the phone.
3. Open the application and go to the "Firmware Update" section.
4. If a new version is available, click "Update" and wait until it's finished (don't turn off the headphones!).

On iPhones or other devices:

There is no official way to update your firmware via iOS. You will need to temporarily connect your headphones to an Android smartphone (you can ask a friend) and use the Mi Earphones app.

Signs that an update is needed:

• 🔊 The sound periodically disappears or stutters.
• 🔋 Battery discharges quickly (less than 3 hours of operation).
• 🎧 The headphones are not synchronized with each other.

⚠️ Attention: Do not interrupt the firmware update process! If the headphone battery runs out during the procedure, they may fail. Make sure the case charge is at least 50% and the headphones are fully charged.

💡

After updating the firmware, reset the headphone settings (15 seconds button on the case) and reconnect them. This will help avoid conflicts with previous settings.

Headphone management: gestures and functions

Mi True Wireless Earphones 2 supports basic control gestures, but their configuration depends on the firmware and the device they are connected to.

On smartphones Xiaomi with MIUI 12+ can be reassigned:

1. Open the Settings. → Connected devices → Mi True Wireless Earphones 2 → Touch control.
2. Select action for left and right headphone (options are available: playback, next track, previous track, voice assistant, turn off sound).

On the iPhone, you can not reassign gestures, but you can turn them off completely:

1. Go to Settings → Bluetooth.
2. Click on the "i" icon next to the headphones.
3. Turn off the option "Double touch to control".

Additional functions:

• 🎤 Transparency mode. To hear the surrounding sounds, touch and hold any earphone for 1 second (only works on Android with a single headset). MIUI).
• 🔇 You can only use one earpiece (like the right one) by putting the second one in the case.

Tips for increasing working hours

Officially, Mi True Wireless Earphones 2 promises up to 5 hours of playback on a single charge and up to 20 hours of case-specific playback, but real-life runtime depends on volume, codec used, and other factors.

• 🔊 Optimum volume. Keep the volume level 60-70%, which will reduce battery load.
• 🎧 Turn off unnecessary functions. In Bluetooth settings (on Android), turn off "Absolute Volume" and "Dual Connection" (if not using).
• 📵 If you don't use headphones, put them in a case, they'll automatically charge.
• 🔄 Update your firmware. New versions often optimize your power consumption.

Signs that the headphone battery is degraded:

• The operating time was reduced to 2-3 hours with full charge.
• Headphones discharge overnight, even if they are in a case.
• The charge indicator on the case flashes red when connected to the charge.

If the battery is rapidly discharged:

1. Completely discharge the headphones (before turning off), then charge to 100% without interruptions.
2. Use the original cable and power supply (5V/1A).
3. Keep your headphones in a cool place (not in the sun or near heat sources).

💡

For maximum battery life, avoid full discharge (below 5%) and overheating. The optimal charge level for storage is 40-60%.

FAQ: Frequently Asked About Mi True Wireless Earphones 2