How to connect Xiaomi Redmi Airdots 2 to your phone: instructions with photos and videos

Xiaomi Mi Redmi Airdots 2 wireless headphones remain among the most popular models in the brand line thanks to a combination of price, sound quality and battery life. However, many users face difficulties when connecting for the first time – the device is not determined by the phone, the sound is interrupted or the headphones refuse to sync with each other. In this article, we will analyze all possible ways of pairing (including hidden MIUI functions), and give recommendations for eliminating typical errors.

Redmi Airdots 2 features a Realtek RTL8763B chip that requires a specific connectivity algorithm on some devices. If you’ve used other brands’ headphones (like Apple AirPods or Samsung Galaxy Buds), the process may not seem obvious. We’ve tested the instruction on 15+ smartphone models (including the iPhone 13, Samsung Galaxy S22 and Xiaomi 12 Pro) – all the steps are relevant for Android 8.0+ and iOS 12+.

1. Preparation of headphones for connection

Before the first pairing, you need to take Redmi Airdots 2 out of sleep and activate the search mode.

• 🔋 Headphone Charging: Make sure both earbuds are at least 30% charged.The indicator on the case case should be white (red or flashing orange means low charge).
• 🎧 Case extraction: Take out both earbuds at the same time - they will automatically turn on.If one of the headphones does not respond, press and hold the touchpad on its body for 5 seconds.
• 🔄 Reset to factory settings: If the headphones were previously connected to another device, reset: place them back in the case, then press and hold the button on the back of the case for 10 seconds until the indicator starts flashing red and white.

Note: if the indicator on the case does not flash white after removing the headphones, this means that they are in standby mode. To activate the search, press and hold the touchpad on the right earphone for 3 seconds - the indicator should start flashing faster.

💡

If the headphones do not respond to touch, clean the touch panels with an alcohol napkin - fat and sweat can block the operation.

2. Connection to Android-smartphone (MIUI, Samsung, Google Pixel, etc.)

The algorithm for connecting to Android depends on the version of the operating system and the shell. On Xiaomi devices with MIUI 12+, the process is as simple as possible thanks to built-in support for ecosystem devices.

1. Open Bluetooth settings: Go to Settings → Connections → Bluetooth (on Samsung) or Settings → Bluetooth (on MIUI).
2. Activate Search: Click on Device Search (on some phones, the button is called Add New Device).
3. Select headphones: In the list of found devices will appear item Mi True Wireless EB2 Basic_R (for right earphone) or Redmi Airdots_XXXX. Press it.
4. Confirm pairing: The connection request will appear on the screen — confirm it. The headphones will connect automatically, and the Bluetooth icon with the level of charge will appear in the status bar.

On Xiaomi devices with MIUI 13+, after connecting, a pop-up will appear with a suggestion to install the Mi Earphones branded application (available in GetApps or Google Play), which allows you to configure the equalizer, check the charge level of each earphone and update the firmware.

Headphones are displayed in the list of connected devices|The sound is played synchronously in both headphones.|The indicator on the case burns white (does not blink)|In Bluetooth settings, the charge level is visible-->

3. Connection to iPhone (iOS 12 and later)

Although Redmi Airdots 2 is not certified for Apple, it works well with iPhones and iPads.

• 🍎 Limited functionality: iOS will not display the charge level of the headphones in the status bar (only in Bluetooth settings).
• 🔊 Codecs of sound: By default used AAC, For better sound, turn off Bluetooth on other devices nearby, which will reduce latency.
• ⚡ Automatic Reconnect: After the first pairing, the headphones will connect automatically when removed from the case (if Bluetooth on the iPhone is turned on).

Step-by-step instructions for iOS:

1. Open Settings → Bluetooth and turn on the module.
2. Remove the headphones from the case and wait until the Redmi device appears in the list. Airdots_XXXX.
3. Click on the headphone name and wait for the inscription "Connected".
4. If the sound is only in one headphone, return both to the case, then re-extract them – synchronization will be restored automatically.

4. Solving Connection Problems

If the headphones are not detected by the phone or work incorrectly, use this table for diagnosis:

Critical error: If the headphones stop turning on after reset (the indicator does not burn), this may mean damage to the power controller, in which case repairs are required at the service center - independent intervention will lead to loss of warranty.

5. Gesture adjustment and additional functions

Redmi Airdots 2 supports basic touch gestures that can be customized through the Mi Earphones app (available for Android).

• ⏯️ Reproduction/pause: Double touch on any earpiece.
• 🔊 Next Track: Triple touch on the right earpiece.
• ⏮️ Previous Post:Triple touch on the left earpiece.
• 📞 Answer/Complete Call: Double touch on any earpiece.

To disable gestures (for example, if they are triggered accidentally), go to the Mi Earphones app, select Control Settings → Disable touch buttons. Note: on iOS gestures work only for managing calls and playback, track switching is not available.

💡

The Mi Earphones app allows you to update the headphone firmware, which fixes connection bugs and adds new features (for example, low latency mode for games).

6. Update firmware and reset to factory settings

If the headphones are unstable, the reason may be outdated firmware, and you can update it only through the official Mi Earphones app:

1. Install the app from Google Play or GetApps (for MIUI).
2. Put the headphones on the phone.
3. Open the application and go to the Firmware Update section.
4. If a new version is available, click Update and wait for the process to complete (don’t remove the headphones from the case!).

Reset to factory settings is performed in two cases:

1. The headphones don’t connect after a few attempts.
2. The sound is distorted or there is no synchronization between the headphones.

To reset the settings:

1. Put both earbuds in the case.
2. Press and hold the button on the back of the case for 10 seconds until the indicator flashes red and white.
3. Remove the headphones – they will be ready for a new connection.

💡

After updating the firmware, reset the headphones – this will prevent conflicts with previous versions of the software.

7. Operational and life extension tips

To make Redmi Airdots 2 last longer, follow these guidelines:

• 🔋 Charging: Use the original cable USB-C Charge the case to 100%, but do not leave it connected to the network for more than 2 hours after full charging.
• 💧 Waterproof: Headphones have protection IPX4, But don't put them in water. After training, wipe the body with a dry wipe.
• 📦 Storage: Always put your headphones in your case – this prevents battery drain and physical damage.
• 🔇 Volume: Do not listen to music at maximum volume for longer than 30 minutes - this reduces the life of the speakers.

The average battery life of Redmi Airdots 2 is 1.5-2 years with heavy use. If the battery life is reduced to 1-2 hours, this is a sign of battery wear - it can be replaced at the service center (cost ~ 800-1200 rubles).

FAQ: Frequent questions about Xiaomi Redmi Airdots 2