How to connect Xiaomi wireless headphones to a Samsung phone: full instructions

Xiaomi wireless headphones are among the most popular accessories due to their combination of price, sound quality and battery life. However, Samsung smartphone owners often have difficulty syncing these devices. Problems arise from differences in connection protocols, firmware features or commonplace user errors. In this article, we will examine all possible ways of connecting, from standard pairing via Bluetooth to alternative methods for older models of phones or headphones.

It is important to understand that Xiaomi and Samsung use different approaches to implementing Bluetooth: the former often optimize their devices for their own ecosystem (for example, for Redmi smartphones or for other devices). POCO), And the other ones are Google standards and their own chips, like Samsung Scalable Codec, which can cause delays in sound, communication, or connectivity, but don't worry, most problems can be solved in 5 to 10 minutes if you know the algorithm.

We tested the instructions on current models: headphones Xiaomi Buds 4 Pro, Redmi Buds 5, Haylou GT7 and Samsung Galaxy phones S23 Ultra, Galaxy A54, Galaxy Z Flip5. All steps are universal and will be suitable for devices released after 2018. If you have older equipment, note the special section at the end of the article.

1. Preparation of headphones and phone for connection

Before you start pairing, make sure both devices are ready to communicate.Missing this stage is the main reason why users can't connect Xiaomi headphones to Samsung.

For headphones:

• 🔋 Charge headphones to at least 30%. Discharged devices may not appear in the list available for connection. Check the charge level by the indicator on the case or through the mobile application (if supported).
• 📦 Many Xiaomi models automatically turn on when removed, but some (e.g. Xiaomi Air 2) SE) require manual activation of the button.
• 🔄 Reset if the headphones have already been paired with another device. To do this, hold the touchpad on both earphones for 10-15 seconds until the red/white indicator flashes.

For the Samsung phone:

• 📱 Update your firmware to the latest version. Go to Settings → Update and install all available updates. Older versions of Android (below 10) may not support modern Bluetooth protocols.
• 🔍 Turn off the power saving mode. It limits the Bluetooth module. Go to Settings. → Caring for the device → Battery → Power saving mode and deactivate it.
• 🎧 Remove old connections. If you've tried to connect these headphones before, but it didn't work, find them in the list of associated devices (Settings) → Connections → Bluetooth) and click "Forget».

⚠️ Note: If your Samsung phone supports dual audio, disable it before pairing.It may conflict with Xiaomi’s protocol, especially on Buds models. 3T Pro and newer.

Charge headphones up to 30%+

Reset the headphone settings (if previously paired)

Update the phone firmware

Turn off the power saving mode

Remove old Bluetooth connections

Disable Dual Audio (if any)-->

2. Standard Bluetooth connection

This is the most reliable and versatile way, and it works for 90% of users.

Step 1. Activate the pairing mode on the headphones:

• 🎵 For most models (Redmi Buds 4, Xiaomi Buds 3): Hold the touchpad on both headphones for 3-5 seconds until the white indicator flashes double.
• 🔄 For Haylou or Mi True Wireless>: press and hold the button on the case (if any) or the touch area on the headphones until the beep.

Step 2: Turn on Bluetooth on your Samsung phone:

1. Open Settings → Connections → Bluetooth.
2. Transfer the slider to the "On" position.
3. Click on “Search for Devices” (or “Add New Device”).

Step 3. Find the headphones in the list and pair:

• 🔍 The list should show an item with the name of your model (for example, Redmi Buds 5 or Mi True Wireless 2.
• ✅ Confirm the connection if a request appears (some Samsung phones may need input) PIN-code - usually 0000 or 1234).
• 🎶 After successful pairing, the headphones will connect automatically the next time you remove the case.

⚠️ Note: If Xiaomi headphones don’t appear in the list of devices, try rebooting the phone’s Bluetooth module. To do this, turn off Bluetooth, then go to Settings → Annexes → Three dots (menu) → Show system-based → Bluetooth, hit Stop and Clear Cache. After restarting your phone, try again.

Xiaomi Buds 4 Pro|Redmi Buds 5|Haylou GT7|Mi True Wireless 2|Another model|I don't know.-->

3. Solving Connection Problems

If the standard method didn't work, don't panic, and 80 percent of the time, it's solved by one of the following:

Problem 1: Headphones are not detected

• 🔌 Check that the headphones are not connected to another device (for example, a laptop or tablet.
• 📱 Reboot the Samsung phone and the headphones. To reboot the headphones, put them in a case for 10 seconds, then pull out.
• 🔄 Reset network settings on your phone: Settings → General. → Reset → Resetting network settings.

Problem 2: Connection is cut or the sound is interrupted

• 🎵 Check the Bluetooth codec. Go to Bluetooth Settings. → The gear badge next to the headphones → Sound quality and select AAC instead SBC Samsung Scalable Codec.
• 📶 Make sure there are no sources of interference: Wi-Fi routers (especially at 2.4 GHz), microwave ovens or other Bluetooth devices.
• 🔋 If the headphones are under 15%, they can automatically shut down.

Problem 3: The sound is only in one headphone

• 🔄 Reset the headphones: Put them in a case, then pull out and hold the touch panels for 10 seconds.
• 🎧 Check the sound balance in the phone settings: Settings → Sound and vibration → Stereo sound balance.
• 🔍 Make sure both earbuds are removed from the case at the same time.Some models (Redmi AirDots) may not sync if you pull them out one at a time.

💡

If Xiaomi headphones are connected but the sound is distorted, try turning off the Adaptive Sound feature in Samsung settings (Settings) → Sound and vibration → Sound quality and effects. It can conflict with Xiaomi's noise-cancellation algorithms.

4. Connect via Mi Fit or Xiaomi Earbuds app

Some headphone models (such as Xiaomi Buds 3 Pro or Redmi Buds 4 Active) require an official app to work properly, which allows you not only to connect the device, but also to configure the equalizer, update the firmware or activate additional features like transparent mode.

Step 1. Install the application:

• 📱 For most models, Xiaomi Earbuds is suitable (available on Google Play).
• 🏃 For fitness headphones (Haylou) GT1) Use Mi Fit.
• ⚠️ Do not install apps from third-party sources – they may contain malicious code.

Step 2. Connect the headphones through the app:

1. Open the app and allow access to location and Bluetooth.
2. Click “Add device” and select your model from the list.
3. Follow the instructions on the screen. You usually need to confirm the connection on your phone and headphones (touchbar holding).

Step 3: Set the parameters:

• 🎛️ In the “Sound” section, select a pre-equalizer or create your own.
• 🔄 Update your headphone firmware if a new version is available (important to fix Samsung compatibility bugs).
• 🎧 Activate Low Lag Mode (if any) to watch videos or games.

⚠️ Note: Xiaomi Earbuds app may not work correctly on Samsung phones with a One shell UI 5.1 and newer due to Bluetooth access restrictions API. If the app doesn't see the headphones, try turning off battery optimization for it in your phone's settings.

5. Alternative ways of connecting

If none of these things worked, try one of these methods, which are less convenient, but sometimes help in difficult situations.

Method 1: Connecting through Developer Mode

On some Samsung phones (especially those with custom firmware), standard Bluetooth can block the connection of Xiaomi devices.

1. Activate Developer Mode: Go to Settings → The phone. → Information about the software and 7 times click on "Assembly Number».
2. Back to Settings → Developer mode and find the Bluetooth Debugging option. Turn it on.
3. Try reconnecting the headphones.

Method 2: Using a third-party Bluetooth stack

Apps like Bluetooth Auto Connect or BassBooster can trick a system into recognizing Xiaomi headphones, but this is not safe, because they require advanced permissions and can collect data.

Method 3: Connecting via another phone

If you have a second smartphone (even on iOS), try connecting your headphones to it first and then to Samsung. Sometimes this resets the stuck Bluetooth settings.

💡

If Xiaomi headphones connect to other devices but not Samsung, the problem is almost always the phone’s firmware. Try updating it or resetting the network settings.

6.Tune the sound after connection

Successful pairing is only half the battle, and in order for sound to be clear, without delay or distortion, you have to adjust the parameters correctly.

Optimization of the Bluetooth codec:

• 🎵 Go to Settings. → Connections → Bluetooth → The gear badge next to the headphones → Sound quality.
• 🔄 Choose. AAC (prioritize for music) or SBC (Avoid Samsung Scalable Codec – it’s optimized for Galaxy Buds headphones.

Equalizer setting:

• 🎛️ In the Xiaomi Earbuds app, select Preset Bass or Rock for powerful sound, Voice for podcasts.
• 🔊 In the phone settings (Sound and vibration) → Turn off all effects if the sound is distorted.

Low delay mode:

For games or videos, activate it in the Xiaomi Earbuds app or in your phone's Bluetooth settings. Note that this may slightly reduce sound quality, but synchronizes picture and audio.

7. Features of connection for old models

If you have a Samsung phone older than 2018 (e.g., a Galaxy) S8, Galaxy A5 2017 or Xiaomi first-generation headphones (Mi AirDots, Redmi AirDots) may require additional action.

For Android phones 8-9:

• 📱 Update your firmware to the latest available version. Even if the official updates don't come, check the custom firmware on the forums (for example, check the custom firmware, XDA Developers).
• 🔄 Use the Bluetooth Repair app to reset the Bluetooth module.
• 🎧 Connect your headphones in mono mode (only one headphone) if the stereo isn’t working.

For headphones Xiaomi 2018-2019:

• 🔋 These models often require a full discharge and charge before first connecting.Discharge the headphones to 0%, then charge to 100%.
• 📦 Check that the case is charged - some old models (Mi AirDots Youth) do not turn on when the case is discharged.

⚠️ Note: Xiaomi Mi AirDots Basic (2019) does not support Bluetooth 5.0 and may not connect to Samsung One phones UI 3.0+. In this case, only replacing headphones or rolling back the phone firmware will help.

8. Frequent questions and answers