How to connect Mi Air 2 headphones to Xiaomi phone: a complete guide to problem solving

Xiaomi Mi Air 2 wireless headphones (also known as Mi True Wireless Earphones 2) remain a popular choice among users of the Xiaomi ecosystem due to the balance of price, sound quality and battery life. However, even experienced smartphone owners sometimes have difficulties with first connecting or re-pairing devices. This article will help you understand everything from basic settings to solving rare bugs.

The Mi Air 2 features Bluetooth 5.0 and Qualcomm’s QCC3020 chip, which provides a stable connection to Xiaomi phones (especially on MIUI 12+). But even with modern protocols, users face challenges from missing headphones in the list of available devices to interrupting sound. We will detail each step, including hidden MIUI settings that can improve connection quality.

Preparation for connection: what to check before pairing

Before you start connecting, make sure both devices are ready to interact, often because of basic flaws that are easy to fix in advance.

On the Mi Air 2 headphone side, you need to:

• 🔋 Make sure that the charge of the case and the headphones themselves is at least 30% (the indicator on the case should flash white when opening).
• 📱 Check that the headphones are not in pairing mode with another device (if you previously connected to another phone, reset the settings).
• 🔄 Update the firmware of the headphones (if available) through the Mi Home or Xiaomi Wear app.

On the side of the Xiaomi smartphone:

• 📲 Enable Bluetooth in the Quick Settings Panel or through Settings → Connections → Bluetooth.
• 🔍 Make sure that there are no old Mi Air 2 records in the list of associated devices (remove them if there are any).
• 📱 Update. MIUI Up to the latest stable version (relevant for Android 10 models)+).

If you plug in your headphones for the first time, they automatically go into pairing mode when you remove them from the case, and if they've been connected to another device before, you'll need to reset them.

⚠️ Note: Mi Air 2 headphones do not support simultaneous connection to two devices.When you try to pair with a new phone, they will automatically break the connection with the previous one.

How to connect Mi Air 2 to Xiaomi

The pairing process takes no more than 1-2 minutes, if you follow a clear algorithm, and below is a universal guide for all Xiaomi models (including Redmi, POCO and Black Shark).

Step 1: Activate the pairing mode on the headphones

1. Take both headphones out of the case - they should automatically turn on (indicators will start flashing red and white).

2. If the headphones were previously connected to another device, reset:

• Put both earbuds in the case.
• Press and hold the button on the back of the case for 10 seconds until the indicator starts flashing red and white alternately.
• Take the headphones out of the case - they will go into pairing mode.

Step 2: Search and Connect via Bluetooth on Xiaomi

1. Open Settings → Connections → Bluetooth on your phone.

2. Make sure the Bluetooth slider is active (blue).

3.In the list of available devices, find Mi True Wireless Earphones 2 (or Mi Air 2) and tap it.

4. Confirm pairing if a request appears (on some versions) MIUI may require input PIN-code - by default 0000).

Headphones flash white | Phone has a notification "Device connected" |Sound played through headphones |Bluetooth settings displays charge level-->

If the headphones don’t appear in the list, try:

• 🔄 Reboot Bluetooth on your phone (turn off/on).
• 📱 Reboot the smartphone itself.
• 🔋 Check the charge of the case (at a discharge below 10%, the headphones may not turn on).

Customization of sound and microphone after connection

Once successfully paired, it is recommended to optimize the sound parameters for better perception. MIUI has hidden settings that will improve the quality of playback.

Optimization of sound profile

1. Go to Settings → Sound and vibration → Sound quality.

2. Select an HD Audio profile (for music) or Clear Voice (for calls).

3 Activate the option "Adaptive sound" - it automatically adjusts the volume depending on the ambient noise.

Setting up the microphone for calls

By default, the Mi Air 2 uses both headphones to capture voice, but this can be changed:

1. During the call, tap the "Sound Customization" icon in the call interface.

2. Select the "Hearphone microphone" (if the option is not available, upgrade MIUI to the latest version).

⚠️ Warning: If the caller hears echoes or interference, turn off the voice enhancement option in the microphone settings.This feature may conflict with Mi Air 2 noise reduction algorithms.

Solving common connection problems

Even after successful pairing, users are faced with common errors, and below are ways to fix them.

Problem 1: Headphones don’t appear in the Bluetooth list

Possible causes and solutions:

• 🔌 Headphones discharged: Place them in a case for 10-15 minutes to recharge.
• 📱 Conflict with other devices: Delete all Mi Air 2 entries in other gadgets' Bluetooth settings.
• 🔄 Firmware failure: Update your headphones via Mi Home (instructions in the next section).

Problem 2: The sound is interrupted or stuttered

This is typical of Bluetooth 5.0 when you're jamming from other devices.

• 📶 Change the codec: Go to Bluetooth Settings → Additionally. → Audio codec and select SBC instead AAC.
• 📱 Turn off Wi-Fi: At 2.4GHz, Wi-Fi and Bluetooth can interfere.
• 🔋 Check the charge: At levels below 20%, communication quality deteriorates.

Problem 3: Headphones are connected, but there is no sound

1. Check if the Mi Air 2 is selected as the audio output device in the notification panel.

2.Reboot your phone – sometimes MIUI doesn’t switch the audio route correctly.

3. In Settings → Applications → Application Management → Bluetooth clear cache and data.

💡

If the headphones connect to only one device (like a laptop but not a phone), reset the network on your phone: Settings → System → Reset → Network Reset. This will remove all saved connections, including Wi-Fi and Bluetooth.

Update to the Mi Air 2 firmware via Mi Home

The manufacturer periodically releases updates for Mi Air 2, which fix connection errors and improve sound, to update the firmware:

1. Install the Mi Home app from Google Play or the App Store.

2. Register or sign in to your Xiaomi account (required!).

3. Connect the headphones to the phone (they should be in the list of Bluetooth devices).

4. Open Mi Home, tap "Add Device" and select Mi True Wireless Earphones 2.

5 If an update is available, a notification will appear – confirm installation.

⚠️ Warning: Do not interrupt the update process or remove the headphones from the case. If the firmware fails, they may stop turning on and you will need to contact the service center.

After updating the firmware to version 2.7.0+, Mi Air 2 has low latency support (up to 88 ms) for games and videos – activated automatically when connected to Xiaomi phones on MIUI 13/14.

Mi Air 2 compatible with different Xiaomi models

Mi Air 2 headphones are officially supported by all Xiaomi, Redmi and POCO smartphones based on Android 8.0+.

On HyperOS phones (such as Xiaomi 14), connectivity is faster thanks to an optimized Bluetooth stack, but older models (such as Redmi 8) may have problems automatically reconnecting, in which case manually running device searches in Bluetooth settings will help.

Alternative ways of connecting (for experienced users)

If the standard method does not work, you can use additional tools.

Connection through Developer Mode

1. Activate Developer Mode: Go to Settings → About Phone and tap on MIUI Version 7 times.

2. Return to Settings → Additional → For developers.

3. Find the Bluetooth debugging option and turn it on.

4. Try to connect again - this sometimes helps with pairing failures.

Use of third-party applications

If the Mi Air 2 is not defined by the system, try apps like Bluetooth Auto Connect or Bass Booster (available on Google Play).

• 🔍 Forced to search for devices within range.
• 🔊 Set up the equalizer to improve sound.
• 🔄 Automatically reconnect when communication is broken.

💡

On root-righted phones, you can manually change the priority of Bluetooth codecs through a file /system/etc/bluetooth/bt_stack.conf. However, this is risky and can lead to unstable Bluetooth operation.

FAQ: Frequent questions about Mi Air 2 Xiaomi