How to connect wireless headphones Xiaomi: instructions for all models

Introduction: features of wireless headphones Xiaomi

Xiaomi’s wireless headphones have gained popularity thanks to a combination of affordable price, high-quality sound and convenient ergonomics, ranging from budget Redmi Buds to premium Xiaomi FlipBuds Pro with active noise cancellation. However, even with such devices, users often face difficulties when connecting first — especially if it comes to non-standard scenarios like synchronizing with multiple devices or restoring communication after a reset.

In this article you will find step-by-step instructions for all current Xiaomi headphone models (2020–2026 d.), including the features of the connection to Android, iOS, Windows/macOS even smart TV. We will also look at common errors (such as when headphones are not defined by the system) and give recommendations for optimizing sound.If you’ve just unpacked a new pair or are trying to revive old headphones after a long period of downtime, this guide will help you avoid common problems.

Preparing headphones for the first connection

There are several steps that must be taken before pairing with the device, both new headphones and those that have been previously used but have been dropped or lying idle for a long time.

First, check the charge level of the headphones and case. Most Xiaomi models (such as the AirDots 3 Pro or Buds 4) have indicators on the case: green/white light means enough charge, red light means recharging. If the indicator does not burn at all, connect the case to charge for 10-15 minutes before first use. Models with support for fast charging (such as the FlipBuds Pro 2) can require up to 30 minutes for a minimum level sufficient for pairing.

Next, remove the headphones from the case - they should automatically turn on and go to search mode (this is indicated by a flashing white / blue LED).

• 🔋 Make sure the headphones are properly placed in the case (contacts should come in contact with charging pins).
• 🔄 Try manually switching them to pairing mode: press the touchpad (or button) on both headphones for 5-10 seconds before the sound signal.
• 📱 For models with Mi support AI (Buds 5 Pro may need to be activated via the Mi Home app.

If the headphones were previously paired with another device, they may need to be reset.

1. Place both headphones in the case and close the lid.
2. Press and hold the button on the case (usually located behind or below) for 15-20 seconds until the indicator flashes red and white.
3. Remove the headphones - they will be ready for a new pairing.

💡

For Xiaomi Buds models 3T Pro and newer reset is done through the Xiaomi Earbuds app: go to Settings → Reset your headphones.

Connecting to a smartphone on Android

Interface with Android devices (including Xiaomi, Redmi smartphones, POCO) It usually goes through automatically with the support of the profile. LE Audio and Fast Pair (for new models). Consider the process with the example of Xiaomi 14 Pro with headphones FlipBuds Pro 2:

1. Open Settings. → Connected devices → Bluetooth (or swipe down the notification bar and hold the Bluetooth icon).

2. Make sure Bluetooth is on. The headphones should appear in the list of available devices called Mi True Wireless (or with a model, such as Redmi Buds). 5A).

3. Click on the headphone name. If you have a request for code confirmation (usually 0000 or 1234), enter it.

For models with Mi support AI (For example, Buds 5 Pro) after the connection will appear a notification about the possibility of installing a proprietary application Xiaomi Earbuds:

• 🎧 Equalizer and noise reduction settings.
• 🔋 Monitoring the level of charge of each headphone separately.
• 🔄 Firmware updates (critical for fixing plug-in bugs).

If the headphones are not displayed in the list of devices:

⚠️ Attention: On smartphones Xiaomi with a shell MIUI 14+ This can trigger background restriction for Bluetooth. → Annexes → Application management → Systemic → Bluetooth and allow auto-start.

Connecting to iPhone and other Apple devices

Xiaomi headphones are optimized for the ecosystem MIUI, You can use them successfully with an iPhone or an iPad, but there are nuances:

1. iOS does not work fast pairing (Fast Pair), so the headphones will have to connect manually through Settings → Bluetooth.

2 Functions like transparent mode or adaptive noise reduction (available in FlipBuds Pro 2) will only work in the basic version without fine-tuning.

3.To update the firmware will require an Android device with the installed Xiaomi Earbuds app.

Instructions for iPhone:

1. Open Settings → Bluetooth and turn on the module.
2. Remove the headphones from the case (they should flash white).
3. In the list of devices, find Mi True Wireless (or the name of your model) and tap to connect.
4. If requested PIN-code, try 0000 or 1234.

On an iPad or MacBook, the process is similar, but additional confirmation may be required in the system window. LE Audio Device is normal and does not affect the sound quality.

⚠️ Note: On Apple devices with a chip M1/M2 Possible problems with synchronizing sound in video (delay to video) 200 Solution: In Bluetooth settings on Mac, disable the "Use for Sound and Video" option for headphones.

Connection to Windows and macOS

Xiaomi’s wireless headphones are PC compatible, but they are often problems with older Bluetooth drivers or conflicts with other audio devices.

For Windows 10/11

1. Turn Bluetooth on via Startup → Parameters → Devices → Bluetooth and other devices.

2. Press "Add device" → Bluetooth.

3. Remove the headphones from the case (the indicator should flash) and select them from the list.

• 🔄 Reboot the Bluetooth adapter: in Device Manager, find Bluetooth Radio Modules, right-click and select Activate (if the option is active).
• 📥 Update drivers through Options → Windows Update or from the laptop manufacturer's website.
• 🚫 Remove all previously saved Xiaomi devices from the list of associated gadgets.

If the sound is interrupted or distorted, try:

1. Open the Control Panel → Sound.


2. Find the headphones in the list, right-click → "Properties".




3. Go to the "Additional" tab and select the format "2 channels, 16 bits, 44100 Hz (CD-quality)".




4. Turn off all sound effects in the Improvements tab.

For macOS (Ventura/Monterey/Sonoma)

On a Mac, the connection is usually easier:

1. Open System Settings → Bluetooth.

2. Keep the headphones near the Mac (in search mode).

3. Press "Connect" next to the device name.

If the headphones are connected, but the sound is only in one channel:

⚠️ Attention: macOS Sonoma has a bug with mono sound for some Bluetooth devices.Solution: go to System Settings → Sound. → Exit, select headphones and set the sound balance in the middle (if the slider is shifted).

Connecting to Smart TV and other devices

Modern Smart TV (Android TV, WebOS, Tizen) support Bluetooth headphones, but there are some nuances here. TV or Redmi Smart TV process as simplified as possible:

1. Open Settings. → Devices → Bluetooth.

2. Turn on device search and select headphones from the list.

3. Confirm the pairing (if necessary, enter the PIN 0000).

On TVs of other brands (Samsung, LG, Sony may need additional action:

• 📺 On Samsung Tizen: Settings → Sound. → Sound output → Bluetooth Speaker.
• 🎮 Nana LG webOS: Settings → Sound. → Bluetooth devices (may need to restart) TV).
• 🖥️ Android. TV (Nvidia Shield: the path is similar to smartphones – via Bluetooth menu.

Important limitations:

• 🔊 Most of the time. TV You can not simultaneously output sound on headphones and built-in speakers.
• 🎬 Lip-sync can be up to 100-300ms latency — that's normal for Bluetooth, but critical for watching movies. Solution: use aptX Low Latency (if supported by your headphone model and your headphones). TV).

Solving Connection Problems

If Xiaomi headphones are not connected or are unstable, the reasons may be both software and hardware.

Headphones are not defined by the device

Checklist for diagnosis:

If the headphones are not displayed on any device:

1. Check the physical condition of the contacts in the case, they may have oxidized or contaminated.
2. Try charging the case from another cable/power supply (sometimes the problem is faulty) USB-port).
3. For models with Mi AI (For example, Buds 5 Pro try resetting through the Xiaomi Earbuds app: Settings → Reset your headphones. → Confirm.

The sound is interrupted or distorted

Causes and solutions:

For Android devices, also check the developer settings:

1. Activate the developer mode (7 taps by the build number in "About the phone").


2. Go to "Settings → System → For Developers".




3. Find the option "Bluetoothooth Codec" and select "aptX" or "AAC" instead of "SBC".




4. disable the "Absolute Volume" (Absolute Volume).

Headphones spontaneously turn off

If the connection is terminated after 5-10 minutes:

• 📱 On Android: Check the battery settings for the Bluetooth app – turn off optimization.
• 🖥️ On Windows: Turn off power saving mode for Bluetooth adapter in Device Manager.
• 🔋 The problem may be a discharged case battery – try using headphones without a case (if the model supports direct charging).

💡

If the headphones turn off during a phone call, check your Bluetooth settings. HD Voice on the mobile menu, sometimes in conflict with the Hands-Free profile (HFP).

Additional settings and optimization

Once connected successfully, you can improve sound quality and usability, and here are the key settings for different platforms:

On Android (with the Xiaomi Earbuds app)

The Xiaomi Earbuds app (available on Google Play) allows you to:

• 🎛️ Set up an equalizer (preset profiles: bass, vocals, classics).
• 🔇 Activate noise cancellation (ANC) transparency.
• 🔄 Update the headphone firmware (critical for fixing plug-in bugs).
• 🎧 Set up gesture control (e.g., double touch for playback/pause).

For dual-connected models (e.g. FlipBuds Pro 2):

1. Connect the headphones to the first device (for example, a smartphone).
2. Open up Xiaomi Earbuds → Double-connection.
3. Activate the mode and connect a second device (such as a laptop).

On iOS (without proprietary software)

On the iPhone, the functionality of the headphones is limited, but the basic settings are available:

• 🔊 Volume control: use buttons on headphones or slider in Control Point.
• 🎵 Change codecs: iOS automatically selects AAC (Best option for Xiaomi).
• 🔄 Headphone reset: Press the touchpad on both headphones for 10 seconds before flashing red.

On PC (Windows/macOS)

To improve the sound on the computer:

• 🎧 In Windows: Install Equalizer APO fine-tuning.
• 🍎 On Mac: Use the built-in equalizer in System Settings → Sound. → Exit.
• 🎮 For gamers: activate the “For Games” mode in Bluetooth settings (reduces latency).

If you use headphones for calls (such as in Zoom or Discord), check:

1. In the microphone settings, select "Hearphones (hands-free)" instead of "Inline microphone".


2. Turn off noise cancellation in the call app (it may conflict with ANC headphones).




3. For FlipBuds Pro 2: in Xiaomi Earbuds, activate Voice Call mode for better speech transmission.

FAQ: Frequent questions about Xiaomi headphones