How to restart Xiaomi Mi Band 5: all ways to reset and solve problems

Xiaomi Mi Band 5

restart

In this article, we will discuss all the official and hidden methods of rebooting the Mi Band 5, including soft reset, hard reboot and recovery via Mi Fit/Zepp. Also explain why the bracelet can “glut” and how to avoid repeated failures. If your gadget began to slow down after updating the firmware or does not turn on after discharging, here you will find working solutions.

⚠️ Warning: Don't confuse a soft reset with a hard reset. The first simply resets the bracelet without deleting the data, and the second erases all information, including training settings and passwords.

1.When do you need a Xiaomi Mi Band 5 reboot?

The Mi Band 5 is powered by Xiaomi’s proprietary firmware, and despite the optimization, it’s not immune to software failures. Here are the typical symptoms that restarts help:

• 🔄 Screen freeze – bracelet does not respond to swipes or taps, shows a black screen with a logo.
• 📵 Synchronization problems – data is not transmitted to the Mi Fit or Zepp app despite a Bluetooth connection.
• 🔋 Incorrect charge – the bracelet shows 100% charge, but suddenly turns off or, conversely, “stuck” at 1%.
• 🚨 Errors after the update – firmware installed, but artifacts appeared on the screen or the settings were lost.
• ⏱️ Lags and brakes – the interface reacts slowly, animations twitch.

Most often, failures occur due to:

1. Firmware conflict – if the update is interrupted or installed with an error.
2. Cache overflows – the bracelet stores temporary data, which over time “clog” the system.
3. Hardware problems - oxidation of charging contacts or battery wear.

💡 Tip: If the bracelet began to glittle after falling or getting moisture, a reboot may not help - here you need a diagnosis in the service center.

2.Soft reset is the safest way

This method doesn't delete data, and it's similar to rebooting a smartphone, which is suitable if the bracelet brakes but responds to touch.

Instructions:

1. Connect the Mi Band 5 to the charger (even if the charge is full).
2. Press and hold the touch button (below the screen) for 10-15 seconds.
3. Wait for the vibration and the appearance of the Mi logo - the bracelet will reboot.

⚠️ Warning: If the bracelet freezes again after a soft reset, this may indicate firmware damage, in which case a hard reset or flashing will be required.

Is the bracelet connected to charging?|Is the charge level sufficient (minimum 20%)?|Whether the charging contacts are clean?|Is Bluetooth on your phone disabled?-->

3 Hard reset – if the bracelet does not respond

If the Mi Band 5 is completely silent — it doesn't vibrate, it doesn't turn on, or it shows an endless load — forced reset will help, and it doesn't erase data, it resets current processes.

Method 1: Through a button (if the screen is not working)

1. Remove the bracelet from your hand and place it on a flat surface.


2. Press and hold the touch button for 20-25 seconds.




3. Release after double vibration - the bracelet will reset.

Method 2: Through the charger (if the button does not work)

1. Connect the bracelet to the charger.
2. Hold the button for 10 seconds, then release it.
3. Hold the button for another 10 seconds, and the logo should appear.

🔧 Technical nuance: If the bracelet does not respond even to a hard reset, the problem may be the power controller. In this case, try to leave it on charge for 1-2 hours - sometimes this "resuscitates" the device.

4. factory reset - complete cleaning

This method removes all data from the bracelet, including:

• 📊 Training settings and goals.
• 🔐 Passwords and screen unlocking.
• ⏰ Alarm clocks and reminders.
• 🎵 Musical notices.

How to reset:

1. Open the Mi Fit or Zepp app.
2. Go to Profile → My devices → Xiaomi Mi Band 5.
3. Select Untie the device (in Zepp - Delete the device).
4. Confirm the action - the bracelet will return to factory settings.

⚠️ Warning: Once reset, you will need to re-link the bracelet to your account through the app. If you forget your Mi Account password, restore it in advance, otherwise you will not be able to use the bracelet.

Alternative way (without phone):

1. Connect the bracelet to the charger.
2. Press and hold the button for 30 seconds until the reset menu appears.
3. Confirm your choice by pressing the button again.

💡

Resetting to factory settings is the last option, if other methods do not work, and then the bracelet will become "like new", but all personal data will be lost.

5.Reboot through firmware - if the bracelet is "brickled"

In rare cases, the Mi Band 5 may stop turning on due to a damaged firmware (for example, after an interrupted update), in which case forced flashing through official software will help.

Steps to recover:

1. Download the latest firmware version for Mi Band 5 from the official Zepp website (Support section).
2. Connect the bracelet to charging and make sure it is defined by the computer as a removable drive (if not, try another one). USB-port).
3. Copy the firmware file (usually with the.fw extension) into the bracelet root directory.
4. Disconnect the bracelet from the PC - the update will begin automatically.

⚠️ Critical information: If the bracelet is not defined as a removable disc, DO NOT try to flash it through third-party utilities (such as Mi Band Tools) – this can permanently disable the device.

In this case, contact the Xiaomi service center – they use special equipment for recovery.

6. How to avoid repeated failures?

To ensure that the Mi Band 5 is stable, follow these guidelines:

• 🔄 Update your firmware through the official app (do not use beta versions).
• 🔋 Do not discharge the bracelet "to zero" - recharge at 20-30% charge.
• 🚿 Avoid soap/shampoo – they can damage the sensor.
• 📱 Keep your data synced with Mi regularly Fit/Zepp (time 2–3 day-day).
• 🔌 Use the original charger – cheap analogues can bring the battery down.

💡 Useful tip: If you actively use notifications, do a soft reboot once a month - this clears the cache and prevents lags.

💡

Before long-term storage (e.g., during a vacation), charge the bracelet to 50% and turn it off via the Settings → Turn it off menu.

7. Frequent reboot errors and how to avoid them

Many users make these mistakes worse by making them:

1. Interrupting the process – if the bracelet vibrates during reset, do not release the button ahead of time.
2. Use of unofficial firmware – custom firmware often contains bugs that cause the bracelet to stop syncing with Mi Fit.
3. Charging from powerful adapters – Mi Band 5 is designed for current up to 1A. Connecting to charge from a smartphone (2A+) can reduce battery life.
4. Ignoring updates – outdated firmware conflicts with newer versions of applications, leading to crashes.

⚠️ Note: If after reset, the bracelet requested an unlock code, and you did not install it, this means that the device was previously linked to another Mi Account.

FAQ: Answers to Frequent Questions