How to reboot headphones Xiaomi Mi True Wireless: all ways to reset and restore

Xiaomi Mi True Wireless Earphones (including Basic, 2, Lite, and AirDots) sometimes require a forced reboot, which can be necessary for freezes, Bluetooth connection problems, sensors malfunctioning, or after a failed firmware update. Unlike smartphones, where reboot is intuitive, with wireless headphones, the process has its own nuances — especially when it comes to resetting before factory settings.

In this article, we’ll look at all the current reboot options, including soft reset (without data loss), hard reset (with factory reset) and recovery via the Mi Home app. You’ll also learn how to distinguish between a freeze from a discharged battery, and what to do if the headphones don’t respond to buttons. Instructions are suitable for most models of the line, but with their features in mind — for example, the Mi True Wireless Earphones 2 and AirDots Pro have different reset button locations.

1.When do you need to reboot Xiaomi headphones?

Not every crash requires a complete reset, but here are typical situations where a reboot will really help:

• 🔄 Headphones do not turn on or off after pressing the sensor/button.
• 🎧 One of the headphones (left or right) does not connect to the phone, although the second one works.
• 🔊 The sound is interrupted, wheezing or delays appear when playing.
• 📱 Headphones are not defined in the list of Bluetooth devices or permanently disabled.
• 🔋 After updating the firmware, glitches appeared (for example, gesture management does not work).

If the problem occurs after a fall or moisture, rebooting is unlikely to help — it requires a diagnosis of the hardware, and do not reset the headphones for no reason: it can lead to loss of the associated devices in memory.

⚠️ Attention: If the headphones are zero, they may not respond to the buttons for 5-10 minutes after connecting to the charging case. Wait until the indicator on the case flashes red (meaning charging is underway), and only then try to reboot.

2. Soft reboot (without resetting settings)

This is similar to "rebooting a computer" -- it cleans up temporary data, but it doesn't remove the interfaces and settings, it's good for eliminating minor glitches.

Instructions for all Xiaomi Mi True Wireless models:

1. Put both headphones in the charging case and close the lid.
2. Wait 10 seconds, then open the lid.
3. Remove the headphones and hold the touchpad on both headphones simultaneously for 10-15 seconds.
4. Release when the headphones flash red and white (or only white, depending on the model).

After that, the headphones will automatically reboot and be ready to plug in. If the lights don't blink, check the battery power - the headphones may be dead.

Put your headphones in your case for 10 seconds | Make sure the case is charged (indicator is on) | Get your headphones out and hold your sensors for 10+ seconds | Wait for the lights to flash-->

3. Hard reset to factory settings

This method removes all the paired devices from the headphone memory and returns them to their original settings.

• 🔗 Headphones connect to other devices (for example, after buying used ones).
• 🔄 The soft reboot didn't help.
• 📱 Headphones are not defined by any device.

The following is a step-by-step guide for Xiaomi Mi True Wireless Earphones 2 / AirDots Pro:

1. Place both headphones in the charging case and close the lid for 5 seconds.
2. Open the lid and get the headphones out.
3. Press and hold the touchpad on both headphones simultaneously for 20 seconds.
4. Release when the indicators start flashing red and white alternately (this is a reset signal).
5. Close the case cover for 10 seconds, then open the headphones ready for a new setup.

For Xiaomi Mi True Wireless Earphones Basic / Lite: the process is similar, but it takes 15 seconds to hold the sensors, and the indicator flashes only white.

⚠️ Warning: After a hard reset, the headphones will lose all the saved connections. You will have to re-match them with your phone, tablet or laptop through Settings. → Bluetooth.

💡

If the headphones don’t connect after reset, try connecting the right headphone (main) first and then the left one – some Xiaomi models require this kind of consistency.

4.Reboot via the Mi Home app (for stitched models)

If your Xiaomi Mi True Wireless headphones support the Mi Home app (like AirDots Pro or Mi True Wireless Earphones 2), you can try rebooting them software-based, a method that is useful if physical buttons don't respond.

How to reboot through Mi Home:

1. Open the Mi Home app and make sure the headphones are connected to the phone.
2. Go to the Profile section → My devices and choose your headphones.
3. Press three points (⋮) in the upper right corner and select Device Settings.
4. Scroll down and find the option to Reset or Reset settings.
5. Confirm the action and wait for the process to be completed (the headphones will turn off and turn on again).

If there is no reboot button in the Mi Home, then your model does not support this function, in which case use physical methods (soft or hard reset).

5. Features of the reboot for different Xiaomi models

Not all Xiaomi Mi True Wireless headphones reboot the same way, and the table below shows the key differences for popular models:

Important: In models that support ANC (active noise reduction), such as the AirDots Pro 2, resets can take up to 25 seconds - this is normal.

6.What to do if the headphones are not rebooted?

If none of these things work, the problem may be bigger than it looks.

1. Check the charge: Connect the case to charge for 30 minutes, even if the indicator is on. Sometimes the battery discharges to a level at which the headphones do not respond to the buttons.
2. Clean contacts: Wipe metal contacts on headphones and in a case with an alcohol napkin - oxidation can block charging.
3. Try another case: If possible, check the headphones with a charging case from another couple (for example, a friend).
4. Update your firmware: Connect your headphones to Mi Home and check for updates. Sometimes the bugs are eliminated after you install the latest version of the software.

⚠️ Warning: If the headphones have fallen into the water or been hit hard, rebooting won't help - it needs professional diagnosis.

Mi True Wireless Earphones Basic|Mi True Wireless Earphones 2|Mi AirDots Pro|Mi True Wireless Earphones Lite|Another model-->

7.How can we avoid problems in the future?

To avoid having to reboot your headphones regularly, follow these tips:

• 🔋 Keep the battery from running out. Charge the case when the indicator shows ≤20%.
• 📱 Update your firmware regularly through Mi Home (if the model is supported).
• 🧹 Clean headphones and case from dust and moisture – this prevents the oxidation of contacts.
• 🔗 Do not connect headphones to too many devices at the same time (optimally – 2-3 gadgets).

Also avoid using headphones in extreme temperatures (below 0°C or above 40°C) – this can damage the battery and electronics.

💡

Regular reboots (every 1-2 months) help avoid the accumulation of temporary firmware errors, even if the headphones are stable.

FAQ: Frequent questions about the reboot Xiaomi Mi True Wireless