The Xiaomi Mi Band 6 fitness bracelet is one of the most popular wearables, but even it sometimes fails: it stops syncing, freezes on the logo or does not respond to touch. In 80% of cases, the problem is solved by a simple reboot, but not everyone knows how to do it correctly. Unlike smartphones, there is no usual power button, and the wrong actions can lead to data loss or even firmware damage.
In this article, we will discuss all the working ways to reboot the Mi Band 6, from a standard soft restart to a forced reset via a charger, and how to avoid typical errors (such as interrupting the upgrade process) and what to do if the bracelet does not respond at all.
When do I need to reboot Xiaomi Mi Band 6?
The bracelet does not require regular reboots, but there are situations when a reboot becomes a necessity:
- 🔄 Interface freeze: screen does not respond to swipes, buttons do not work, but backlight is on.
- 🔋 Synchronization problems: data is not transmitted to the Mi Fitness app (formerly Zepp) despite a stable Bluetooth connection.
- 📱 Errors after the update: the bracelet stopped showing notifications or settings were lost (for example, time or pedometer).
- 🔌 Misfunction of sensors: the pulsemeter gives out incorrect values, or the bracelet does not recognize activity.
- 🚨 Cyclical reboot: The device is constantly switched on and off on its own.
If the bracelet is simply dead and doesn't turn on after charging, the problem may be in the battery or cable - in which case rebooting won't help. Also, don't confuse the rebut (temporary shutdown) and factory reset (complete deletion of data).
⚠️ Note: If the bracelet is making a mistake E1 or E2 When you connect to a charger, it might indicate a hardware malfunction.
Method 1: Soft reboot through the bracelet menu
The safest method, which doesn't affect the stored data, is suitable if the bracelet screen responds to touch.
- Swipe your finger up the screen to open the main menu.
- Find the icon. ⚙️ Settings (usually at the bottom of the list) and tap it.
- Scroll down to Reboot (in English firmware - Reboot).
- Confirm the action by clicking the tick ✓.
The bracelet will turn off and on automatically in 10-15 seconds, which works on all firmware versions, including the Mi Band 6 NFC.
Sync with the app | Charge the bracelet to at least 20% | Make sure there is no moisture on your hand
-->
If Reboot is not on the menu, your firmware is outdated. Update it through the Mi Fitness app before you try again.
Method 2: Forced button reboot (if the screen is unresponsive)
When the bracelet freezes and doesn't respond to swipes, the hardware rebuke will help, and it uses a touch button under the screen to return to the menu.
Instructions:
- Remove the bracelet from your hand and make sure there is no moisture on the body.
- Press the touch button under the screen for 10-15 seconds.
- Wait until the screen goes out and then the Mi logo lights up again.
If the bracelet does not respond to the hold of the button, try to repeat the action by connecting it to the charge. Sometimes low battery charge blocks the forced rebuke.
⚠️ Attention: Do not use sharp objects (toothpicks, needles) to press, this can damage the sensor. Press your finger with effort, but without fanaticism.
Once a week | Once a month | Only after updates | Never hung | Another option-->
Method 3: Reboot through the charger
This method helps if the bracelet is not switched on at all or cyclically reloaded, and it will need an original charger (or certified counterpart).
Step-by-step:
- Connect the bracelet to charging and wait for the charge indicator (red light bulb) to appear.
- If the light is not on, try another cable or USB-port.
- Hold the touch button under the screen for 20-30 seconds.
- Release the button when the screen goes out. The bracelet will reset automatically.
If the bracelet never turns on after that, the problem may be a discharged battery. Leave it on charge for 1-2 hours, then try again.
What to do if the bracelet does not respond to charging?
Method 4: Reset via Mi Fitness (without data loss)
If the bracelet syncs with the phone but is unstable, you can initialize the reboot via the official app, which is softer than the hardware reboot and saves all the settings.
How to do this:
- Open the Mi Fitness app (or Zepp if you use the older version).
- Go to the Profile section → My devices and choose Mi Band 6.
- Slap the icon. ⚙️ Settings of the device.
- Scroll down and find the Reboot bracelet (or Restart device).
- Confirm the action.
It takes about 30 seconds, and once you restart, the bracelet automatically connects to the phone.
| Rebooting method | When to use | Is the data preserved? | Implementation time |
|---|---|---|---|
| Soft reboot via the menu | Bracelet responds to touch | Yes. | 10-15 sec. |
| Forced button rebuke | The screen is not responding. | Yes. | 20-30 sec. |
| Rebooting through charging | The bracelet is off. | Yes. | 30-60 sec. |
| Reset via the Mi Fitness app | Incorrect work with synchronization | Yes. | 20-30 sec. |
| Hard discharge (see next section) | Critical firmware errors | No. | 2-3 minutes |
Method 5: Hard reset to factory settings (extreme case)
This method erases all data from the bracelet, including:
- 📊 Activity statistics (steps, calories, sleep).
- ⚙️ Individual settings (alarm clocks, notifications).
- 🔒 Passwords and data NFC (if maintained).
Use it only if:
- The bracelet is cyclically reloaded.
- The screen or sensors are not working after the update.
- Other ways of rebooting didn't help.
Instructions for rigid discharge:
- Disconnect the bracelet from your phone in Bluetooth settings.
- Put him on charge.
- Hold the touch button for 40 to 50 seconds until the Mi logo and vibration appear.
- Release the button - the bracelet will reset and reset.
After that, you will need to reconnect the bracelet to the phone through the Mi Fitness application and configure it from scratch.
💡
Before a hard reset, try updating your firmware through an app, often solving problems without losing data.
⚠️ Note: On some firmware, a hard reset can lead to an error E3 (If the bracelet does not turn on after the reset, contact the service center.
Frequent Mistakes and How to Avoid Them
The wrong actions in rebooting can make the problem worse, and here are the typical user errors and their consequences:
- 🔌 Interrupting the Update Process: If you remove the bracelet from charging while installing the firmware, it may stop turning on (E1/E2).
- 💦 Moisture on contacts: Rebooting with wet hands or sweaty contacts leads to corrosion and unstable sensor performance.
- 🔋 Discharge to zero: If the bracelet is completely discharged, it may not be possible to turn on even after connecting to charging - it requires "acceleration" of the battery.
- 📱 Incompatible software: Installing firmware from Mi Band 5 or modified versions often causes freezes.
To minimize the risks:
- 🔄 Regularly (once every 1-2 months) perform a soft reboot to clean the cache.
- 📲 Update the firmware only through the official Mi Fitness app.
- 🚿 Avoid getting water on charging contacts (despite the claimed 5) ATM, Salt and chlorine can damage them).
💡
If the bracelet freezes after each update, roll back the firmware through the application or contact Xiaomi in support - this is a sign of incompatibility of your model with the new version of the software.