How to Reboot Xiaomi Band 5: All the Ways

Modern wearables like the Xiaomi Mi Band 5 often run for weeks without the need for user intervention, but even the most stable systems sometimes require restarting.If your activity tracker freezes, stops syncing data or just starts to work incorrectly, the standard solution is to reboot the device. Unlike smartphones, fitness bracelets don't have a physical on button, which can cause difficulties for beginners.

In this article, we will take a look at all the available methods for restarting the Mi Band 5, from soft reboot through menus to forced reset. Proper reboot helps clear the cache, fix software bugs and restore connection to the phone without losing accumulated data about your activity. It is important to understand the difference between a conventional shutdown and a complete reset, so as not to delete your achievements by accident.

Before we start taking radical measures, it's worth trying simple ways that don't require a charger connection. Soft reboot through the menu doesn't delete your data, keeping the pace and sleep statistics in the tracker's memory until the next synchronization. Let's take a step-by-step look at how to perform this operation in different ways.

Reboot through the device menu

The easiest and safest way to reboot the Xiaomi Mi Band 5 is to use the built-in menu of the bracelet itself.This method does not require a smartphone nearby or a charger connection, making it ideal for use in the field.

Once the screen is awake, you need to find the settings section directly on the bracelet display. Swipe left or right until you find the gear icon or More where the system options are hidden. Depending on the firmware version, the path may vary slightly, but the navigation logic remains the same for the entire Mi Band line.

Inside the settings menu, find the System or shutdown icon immediately. When you click on it, you'll see either Reboot or Power off. If you choose to turn off, the bracelet will go out, and you'll need to press the touchpad again to turn it on, which is equivalent to rebooting.

It's worth noting that if the touch screen of the wristband doesn't respond to touch, this method, unfortunately, will not help. In such cases, the system freeze requires the use of other, deeper methods of recovery.

Using the Mi Fit app to restart

If the wristband sensor works, but you prefer to control the device from the big screen of your smartphone, you can use the official Mi Fit (or Zepp Life) application, which is convenient because you immediately see the status of the connection and you can make sure that the command has been received by the device. Open the application on your smartphone and go to the Profile tab in the lower right corner.

From my device list, select your Xiaomi Mi Band 5. After you go to the bracelet menu, scroll down to the bracelet settings section. There you will find the option to Break Connection or Unbind. Although this action is primarily intended to untie the device, in some software versions it initiates a restart of sync services on the tracker itself.

However, a more direct method through the app is to search for the reboot function in the deep settings. Some software updates have a Reboot Band button that sends a command to reboot without breaking the connection. If there is no such button, you can try simply updating the data by pulling the screen down for synchronization, which often “revives” the hanging data processes.

⚠️ Note: When unlinking the device (Unbind), all unsaved data that has not yet been transferred to the server may be lost. Always make sure that the last synchronization was successful before breaking the connection.

Using the app also allows you to check for firmware updates, which often contain bug fixes that require frequent reboots. If your Mi Band 5 is behaving strangely, checking the software version is a must before any manipulation.

Forced reboot through the charger

When software methods fail and the bracelet screen fails to respond fully to touch, there is a time-tested "hardware" way. Xiaomi Mi Band 5, like many other electronic devices, responds to the power supply connection in a certain way that can be used to force awakening or reboot.

To do that, you'll need an original charger. Remove the tracker from the strap if it's still there, and plug it into the slap. USB-When the contacts are connected, the device must vibrate and the battery screen will light up. If the bracelet is in deep sleep or frozen, the power connection often causes the power controller to initiate a hardware reset.

If a simple connection didn't work, try this algorithm: plug the bracelet into charging, wait for the logo or charge indicator to appear, and then quickly disconnect it. Repeat this procedure 3-4 times in a row. This series of connections and shutdowns can force the power controller to restart if the software part is getting stuck.

It is important to use a good one. USB-A weak current from the computer may not start the wake-up process, whereas a powerful power supply from the smartphone will do the job more efficiently. Make sure the contacts on the back of the bracelet and charging are clean and not oxidized.

Full reset (Hard Reset)

If a conventional reboot doesn’t fix the problems, a factory reset may be required, a procedure known as Hard Reset that removes all user data, dial settings, and stored targets from the device, a last resort that should only be resorted to if other methods have failed.

To perform a full reset on the Mi Band 5, a combination of actions is usually used through the device menu. Go to Settings on the bracelet, find Factory Reset or Unbind. The system will ask for confirmation of action, since the consequences are irreversible without a backup in the application.

Once confirmed, the bracelet will clear your internal memory and reboot out of the box, you will have to re-bundle it with your smartphone via the Mi Fit app. All historical data that was previously synced to the cloud will remain safe in your account, but local data from the last days that did not sync will be lost.

Use a full reset only when you are sure that the problem is software-based and not solved by simply turning off. Frequently using Hard Reset unnecessarily can indicate a deeper hardware malfunction or poor firmware.

Diagnostics of sensor and screen problems

Often users are looking for a way to reboot because the touch screen stops working or it starts to "glut." The Xiaomi Mi Band 5 has a capacitive sensor that is sensitive to humidity, temperature and pollution. If the screen does not respond, try first to wipe it with a dry soft cloth.

In some cases, activating the Wrist Raise mode or turning it off in settings helps. If the screen lights up but does not respond to touch, the problem may be static electricity. Remove the bracelet from your hand, place it on a dry non-conductive surface (wood, plastic), and try rebooting through the menu if the sensor is partially working.

If the screen is on, but the image is distorted (artifacts, stripes), this may indicate damage to the matrix or plume. In this situation, software reboot is unlikely to help, and you will need a diagnosis in the service center. However, it is worth trying to restart the system to prevent software failure of the display driver.

⚠️ Warning: Don't try to disassemble the body of the Mi Band 5 yourself.The device has a sealed body, and a breach of integrity will result in loss of moisture protection.If the screen is broken or not working after reset, contact the specialists.

It is also worth checking whether Do Not Disturb (DND) mode is enabled, which can block the screen backlight when notifications are received, creating the illusion of a malfunction.

💡

If the sensor is not working in one hand, try putting the bracelet on the other hand or loosening the strap, and sometimes too tight fit or swelling of the tissues can affect the approach and touch sensor.

Frequently Asked Questions (FAQ)

💡

The most reliable way to resuscitate a fully got stuck bracelet is to wait for its complete discharge and subsequent charging.

In conclusion, proper operation and timely reboot of the Xiaomi Mi Band 5 will extend its life.Most problems are solved by the simple methods described above, without the need to contact the service.