Modern wearables like the Xiaomi Mi Band 4 have become an integral part of the lives of millions of users, tracking activity and notifications. However, like any complex electronic device, the activity tracker can periodically crash, freeze or stop correctly synchronizing with a smartphone, in such situations, it becomes necessary to force the device to restart to restore its normal functioning.
Many owners mistakenly believe that this requires looking for a physical button on a case that the fourth generation bracelet simply does not have. Forced reboot in this case is carried out by software methods through a paired mobile device. Understanding the correct algorithms of actions through the Mi Fit (or Zepp Life) application avoids panic and bringing the gadget to the service center with minor software errors.
In this article, we will take a look at all the ways you can control your tracker power remotely, how to safely turn off your device, update your firmware to fix bugs, and what to do if your screen is out and doesn't respond to touch. Using the app's built-in features is key to your wearable assistant's long and stable operation.
Why Mi Band 4 might need a reboot
Fitness trackers are constantly waiting and intermittently communicating with the phone, which puts strain on their operating system. The interface or sensor freezes often due to the accumulation of temporary files or errors in the process of synchronizing data. When the bracelet stops responding to swipes or the screen does not light up when lifting the wrist, this is the first signal that you need to intervene.
Another common cause of failure is incorrect firmware updates or interrupted data transfer. If the new software is unsynchronized during the download process, the device may go into a reboot cycle or completely lock down. In such cases, standard screen control methods become unavailable, and an external trigger from the phone is required.
⚠️ Warning: If your bracelet is heated and no longer responsive, do not try to charge it immediately.Let the device cool down, as heating may indicate a short circuit or a critical power controller error.
Also worth considering is the influence of third-party factors, such as magnetic fields or static electricity, which can destabilize the electronics. The Mi Band 4 touch screen is sensitive to environmental changes, and software reset helps to calibrate the sensors again. Regular, at least once a month, reboot helps to clear the system cache and maintain a high interface response rate.
Preparation for remote bracelet management
Before you start any manipulation of the tracker software, you need to make sure that the communication link is ready - your smartphone. a stable Bluetooth connection is critical for successful transmission of control commands. Make sure that the phone is on Bluetooth and it is active, and the bracelet is in line of sight (no more than 1-2 meters).
The second important step is to check the version of the installed application. Mi Band 4 uses Mi Fit applications or its new analogue Zepp Life. The outdated version of the program may not contain the necessary protocols for correct reboot or reset settings, so visit the app store (Google Play or App Store) and update the software to the latest available version.
- 📱 Make sure that the smartphone is at least 20% charged so that it does not turn off during the data transfer process.
- 🔗 Check the list of paired devices in Bluetooth settings and make sure that Mi Band 4 is displayed as "Connected".
- 📶 Turn off the Flight mode on your phone, as it blocks the operation of wireless communication modules.
It is also worth checking for free space in the phone’s memory, as the app can create temporary logs during the device diagnosis. If you are using Android, make sure that the application is given all the necessary permissions to work with geolocation and Bluetooth, otherwise the connection with the bracelet can be unstable.
💡
Before starting any operations, take a screenshot of your current settings or data if they are important to you, as some types of resets can remove accumulated statistics.
Instructions: How to restart Mi Band 4 through the app
Since the Xiaomi Mi Band 4 body does not have a physical button, the reboot process is completely software-based. There are several methods, from simple shutdown to complete reset, and the choice of the specific method depends on the degree of “hang” of the device. The most gentle and recommended method is the use of the disconnect function in the application.
To do this, open the Zepp Life app (formerly Mi Fit) on your smartphone. Go to the device profile, usually the bracelet icon on the bottom menu or the Profile section. Find the device control item in the settings list and select the deactivation option. Once confirmed, the bracelet vibrates and goes out.
⚠️ Warning: Once disconnected through the app, the bracelet will not turn on on on its own. you will need to put it on the charger or perform an action that initiates the turn on (for example, connecting to the phone) to start it again.
If a standard shutdown doesn't work or the menu doesn't open, you can try the forced sync method. Press the data update button in the main application window. This process often causes the bracelet controller to restart its communication services, which is equivalent to a soft reset. In some cases, this shakes up the system and returns responsiveness to it.
☑️ Algorithm of rebooting through the application
It's important to understand the difference between simply turning off and rebooting. When you turn off the device, you turn it off. Rebooting involves a cycle of turning off and then automatically turning on. In the case of the Mi Band 4, after the "Disable" command in the application, the device turns off. To complete the "Reboot" cycle, just put the bracelet on charging or tap the touch area (if it reacts), and it will turn on with a clean process memory.
Resetting settings to factory via phone
When soft reboot techniques fail to address critical errors, a full reset may be required, which returns the device to its original state by removing all user data, dial settings, and stored statistics, a radical measure, but often the only one possible in case of serious software failures.
You can reset through the app menu. In your Mi Band 4 profile, find Unbind or Reset. The app will warn you that all data will be deleted. Once confirmed, the bracelet will clear the internal memory and return to factory settings as if you had just taken it out of the box.
There is also an alternative way through the menu of the bracelet itself, if the sensor is partially responsive: swipe across the screen to the last menu (usually "More" or "More"), find the gear icon and select "Reset". However, if you are looking for a way to do this through the phone because of a broken screen, use the "Sever Communication" feature in the app - it initiates a reset on the device side.
| Parameter | Soft reset | Reset to factory |
|---|---|---|
| Data retention | Data is retained | All data is deleted |
| Implementation time | 10-20 seconds | 30-60 seconds. |
| Risk of losing settings | No. | High-pitched |
| When to use | With small hangings | When selling or making critical mistakes |
After the reset procedure, you'll need to re-connect the bracelet to your phone. The Zepp Life app will suggest you set the device up as new or restore data from a cloud backup if it was created earlier, a great way not only to fix bugs, but also to refresh the interface if it was slow.
What happens to health data after a reset?
Updating the firmware as a method of eliminating errors
Often the Mi Band 4 is unstable because of software bugs that developers have already fixed in new versions of software. Updating firmware is not just a way to get new features, but also an effective method of treating "big" behavior. If the bracelet behaves strangely, checking for updates should be one of the first steps you take.
The update process is initiated through the app. Go to the device profile, and if a new version is available, you will see a red dot or notification. Click on Update firmware. It is important that at this point the bracelet is charged at least 20% and the phone has a stable Internet connection to download the data packet.
During the upgrade, the bracelet screen will show the progress bar or the Mi logo. It is strictly forbidden to interrupt this process, turn off the phone or carry the bracelet away from the smartphone. Interrupting the firmware recording can lead to the "firing" of the device when it stops turning on at all. Wait for a message about the successful completion and automatic restart of the tracker.
- 🔄 The update often corrects errors in the operation of the pulsemeter and pedometer.
- 📡 Improves Bluetooth connection stability and response speed.
- 🔋 Optimizes energy consumption by extending the operating time from a single charge.
If the update doesn't start or gets stuck at a certain percentage, try restarting the smartphone and trying again. Sometimes the app cache interferes with the correct download of the firmware files. In rare cases, removing and re-installing the Zepp Life app helps.
💡
Regular firmware updates are the best prevention of software failures, as new versions contain bug fixes found in previous releases.
Solving synchronization and connection problems
There are situations where the bracelet seems to be on, but the phone doesn't see it or loses communication all the time, which is often perceived by users as a need to reboot, although the problem may be a conflict of Bluetooth addresses. To solve this problem, the application has a function "Search for the device" or "Find the bracelet".
If the bracelet doesn’t respond to the application’s commands, try removing it from the list of conjugated devices in the phone’s Bluetooth settings (forget the device), and then re-search through the app, which forcibly breaks old, possibly corrupted communication protocols and establishes a new, clean communication channel.
⚠️ Note: Do not remove your device from your Bluetooth settings without first breaking the connection in the Zepp app itself. Life/Mi This can cause the application to “lose” the bracelet and have to perform a complete data reset.
It’s also worth checking if the list of connected devices on your phone is overloaded. If you have a lot of gadgets (earphones, watches, cars) connected, your phone may not have time to poll them all. Temporary disconnection of other devices can help establish a stable connection with the Mi Band 4.