How to Reboot Xiaomi Amazfit Bip Watch: 5 Ways to Work (Including Hard Reset)

When do I need to reboot the Amazfit Bip smartwatch?

Smart watches Xiaomi Amazfit Bip (and their modifications – Bip S, Bip U, Bip) GTS/GTR) Although firmware is stable, it sometimes fails, and a reboot of the device may be required in several typical situations:

First, if the watch freezes on the logo when it's turned on or stops responding to touches on the screen. Second, if you're not synchronizing correctly with the Mi Fit/Zepp app, when your steps, pulse, or notifications aren't updated. Finally, rebooting helps after a failed firmware update when the device starts to brake or discharge quickly. It's important to understand that a regular reboot (soft reboot) and a full factory reset (hard reset) are different procedures with different consequences.

In this article, we will discuss all the current ways to reboot the Amazfit Bip line, including hidden button combinations and recovery via PC, and you will learn how to avoid data loss when resetting and what to do if the watch does not respond to any manipulation.

Method 1: Soft reboot (reboot) through the menu

The safest method is to programmatically reboot through the system menu, which does not delete user data (steps, training, settings), but simply restarts the system, which is suitable if the Amazfit Bip watch responds to touch, but operates unstablely.

Instructions:

• 📱 Open the main menu of the watch by swiping up the screen.
• ⚙️ Find the Settings icon (cog) and tap it.
• 🔄 Scroll down to the System point. → Reboot.
• ✅ Confirm the action by touching OK.

The watch will turn off and automatically turn on after 10-15 seconds.If after the reboot the problem persists (for example, notifications do not sync), try updating the firmware through the Zepp app or reset settings (see the next section).

💡

If the menu does not include "Reboot", upgrade the firmware to the latest version of the watch. In older versions of the software, this item may not be available.

Method 2: Hard reset (forced reboot)

If the Amazfit Bip screen doesn’t respond to touch or the watch freezes on the logo, a forced reboot will be required, which works on all models of the line, including the Bip S and Bip U, but does not reset settings.

How to do this:

1. 🕒 Press the physical button on the right side of the body.
2. 🕝 Hold it for 15-20 seconds until the screen goes out and starts to reboot.
3. 🔋 If the watch does not react, connect it to the charger and try again.

Note: Amazfit GTS/GTR models use a touch zone on the body instead of a button – pinch it in a similar way. If the watch freezes again after a forced reboot, this may indicate firmware damage or hardware failure (for example, a bloated battery).

Method 3: Reset to factory settings (Hard Reset)

Note: This method completely removes all data from the watch, including:

• 📊 Activity statistics (steps, exercise, sleep).
• ⚙️ User settings (dials, notifications, alarm clocks).
• 🔒 Linking to Mi Account Fit/Zepp.

Resetting to factory settings is advisable if:

• 🐢 The watch slows down after updating the firmware.
• 🔄 Cannot connect to the phone despite repeated attempts.
• 📵 The screen flashes or displays artifacts.

Instructions for Amazfit Bip/Bip S:

1. 🔋 Charge the watch to at least 50% (resetting at low charge can cause the device to be thrown away).
2. 📱 Go to Settings. → System system → Resetting settings.
3. ✅ Confirm the action by selecting Yes.

For Bip U/GTS models, the path may be different: Settings → About → Reset. Once reset, the watch will automatically reset and offer to undergo the initial setup, as after purchase.

Battery charge > 50% | Sync with the application | Remember/photograph dial settings | Untie the watch from the Zepp account (optional)

-->

Method 4: Reboot via the Zepp (Mi Fit) app

If the Amazfit Bip watch is synced to the phone, you can initiate a reboot or reset via an official app, a method that is convenient when physical access to the watch is limited (for example, if it is in a case or on the hand of another person).

Step-by-step:

1. 📲 Open the Zepp app (formerly Mi Fit) on your smartphone.
2. 🔍 Find your watch in the list of devices and tap it.
3. ⚙️ Go to the Device Settings → Additionally.
4. 🔄 Choose Reboot or Reset settings (depending on the action you need to take).

The advantage of this method is the ability to back up data before reset. In the Device Management section of Zepp, there is an option Export data, which will allow you to save your activity history to a.csv or.gpx file.

💡

Resetting via the app is safer than through the clock menu, as it allows you to pre-save data to the cloud.

Method 5: Recovery via PC (for power users)

If the Amazfit Bip is not turned on or is getting stuck in bootloop mode, it may require computer flashing, a technique that requires technical skills and is only suitable for models based on the Nordic nRF52832 chip (first generation Bip).

Tools required:

• 🖥️ PC Windows/macOS.
• 🔌 Firmware cable (usually used) USB-TTL adapter).
• 📁 Firmware for your model (downloads from forums) 4PDA or XDA Developers).
• 🛠️ NRF Connect or Amazfit Bip Tools.

The short algorithm:

1. 🔌 Connect the watch to the adapter while observing the slack (GND, TX, RX, VCC).
2. 📥 Download the firmware in.hex or.bin format.
3. 🖱️ In nRF Connect, select a port and flash the device.

⚠️ Warning: Wrong firmware can permanently damage your watch, a method that is only recommended if you are confident in your actions or follow a proven instruction with confirmed reviews.

Frequent Mistakes and How to Avoid Them

Even when following instructions, users often make mistakes that can make the problem worse, and here are the most common ones:

• ⚡ Low charge reset: If the battery is discharged below 20%, the watch may not turn on after reset.Always charge the device before manipulation.
• 🔄 Interrupting the process: If you have started resetting or updating your firmware, do not turn off the clock from charging or press buttons until the process is complete.
• 📱 Unsynchronized data: Before resetting, make sure that all data (training, sleep) is uploaded to the Zepp app.

Another common problem is that the watch doesn't turn on after reset, 90 percent of the time it's due to a battery that's dead, and then you plug it into a charger and wait 10 to 15 minutes, and if the charger doesn't show up, try another charger or cable, and if that doesn't work, the power controller may have failed, and you'll need repairs.

⚠️ Warning: After resetting to factory settings, the Amazfit Bip watch may require re-association to your account. If you forget your Mi Account or Zepp password, restore it in advance, or you risk losing access to your device.

FAQ: Answers to Frequent Questions