Fitness trackers often have problems with accessory contamination, especially in the summer. Active lifestyle, sweat, dust and water leave marks on the surface of the silicone, making wearing the device unhygienic. If you are looking for an answer to the question of how to wash the wristband from the Xiaomi Mi Band 4 watch, it is important to understand that the material requires a delicate but careful approach.
Improper cleaning can damage the texture of the strap or even loss of color, which is especially critical for the brighter versions of the Xiaomi Mi Band 4. In this article, we will discuss effective methods for removing contaminants that will not harm the device.
Regular maintenance of accessories extends the life of the accessories and preserves the neat appearance of the gadget. We have prepared step-by-step instructions that will help you return the bracelet to its original purity in a matter of minutes.
Preparation for cleaning and selection of safe means
Before you start active, you need to prepare the workplace and the necessary tools. To clean the Xiaomi Mi Band 4 bracelet, you need a container of warm water, a soft sponge or microfiber fabric. The use of aggressive chemistry is unacceptable, as it can destroy the structure of the polymer.
The main active ingredient in most cases is a regular liquid soap or dishwashing agent, which is excellent for breaking down fat deposits formed from contact with the skin. It is important to avoid using solvents, acetone or alcohol in its pure form, as they can make the silicone sticky or cause a change in color.
For hard-to-reach places like tracker mounts, a soft toothbrush is great, it allows you to mechanically remove dirt without scratching the surface, and prepare a dry towel for final drying, so that there are no scuffs left on the device.
💡
Use only soft brushes with natural or soft synthetic bristles to avoid leaving micro scratches on the glossy parts of the strap.
Basic instructions for washing silicone strap
The cleaning process begins with removing the tracker from the strap. Although the Mi Band 4 has water protection, it's best not to risk electronics and disconnect the capsule. This will allow you to fully immerse the strap in water and thoroughly rinse the connection sites.
Soak the bracelet in soapy solution for 10-15 minutes, this will soften the long-standing dirt and sweat that has been ingrained into the pores of the material. After soaking, thoroughly rub the surface with a brush, paying special attention to the inside of the skin contact.
☑️ Procedure for cleaning
Wash all the soap under running water. Make sure there is no soap film left in the mounting holes, which can irritate the skin when worn. Wet the bracelet with a paper towel and leave to dry at room temperature.
💡
Careful rinsing is a critical step, as the residues of the detergent can cause an allergic reaction with prolonged contact with the skin.
Removal of persistent spots and darkening
Over time, light straps can darken or become covered with spots that are difficult to remove with regular soap, in which case baking soda comes to the rescue, mix it with a little water to a state of mush and apply it to problem areas.
Leave the soda paste for 5-10 minutes, then gently brush.The soda's abrasive particles act as a soft scrub, removing the top layer of contaminants without damaging the base.This method is particularly effective at removing traces from clothing or paint.
If soda doesn't work, you can use hydrogen peroxide. You can moisten the cotton-coated disc in solution and wipe the stains. Peroxide has a bleaching effect, but you should use it with caution so as not to damage the print on the bracelet.
⚠️ Warning: Do not use chlorine-containing bleachers ("White" and analogues). Aggressive chlorine can break down the molecular bonds in silicone, making the bracelet brittle and brittle.
Fighting foul smell
The bad smell of the bracelet is the result of bacteria multiplying in the pores of the material, and even if the strap is visually clean, it can emit a sweaty smell, and antibacterial agents are best for disinfection.
Soak the bracelet in a solution of water with a small amount of vinegar or lemon juice, an acidic medium neutralizes the alkaline compounds of sweat and kills bacteria, 15-20 minutes is enough to eliminate the source of the smell.
You can also use sprays to disinfect sports equipment, spray it on the inside of the bracelet and let it dry, and regular treatment will help prevent the appearance of odor in the future.
Comparison of cleaning methods: efficiency table
Different types of pollution require different approaches, and to make it easier for you to choose a method, we have compiled a comparison table of the effectiveness of different tools for the Xiaomi Mi Band 4.
| Type of pollution | Recommended remedy | Time of exposure | Efficiency |
|---|---|---|---|
| Sweat and fat | Liquid soap | 5-10 minutes | Tall. |
| Clothing stains | Soda + water | 10-15 minutes | Medium |
| Bacteria and smell | Vinegar solution | 15-20 minutes | Tall. |
| Persistent spots | Hydrogen peroxide | 5 minutes | Medium |
Use this table as a cheat sheet when choosing a cleaning method. Combining methods (e.g., soap first, then soda) can give the best result for heavily contaminated accessories.
What you can not do when cleaning
There are a number of things that can permanently damage your bracelet, especially avoiding hot water, and boiling water can deform silicone by changing its shape and size.
Don't use hard brushes with metal bristles or abrasive sponges for dishes. They will leave deep scratches in which dirt will accumulate even faster, the surface will become rough and unpleasant to the touch.
⚠️ Warning: Never dry the bracelet on a battery, heater or in direct sunlight.High temperature accelerates the aging of the material and fading of color.
It is also not recommended to use gasoline or kerosene to remove stains, these substances are toxic and can cause a chemical reaction with the bracelet material, making it unsuitable for wearing on the skin.
What to do if the bracelet has lost color?
Proper drying and storage
After washing, it is important to dry the bracelet properly. Shake it to remove excess water from the holes. Place the strap on a dry towel in the straightened form.
Make sure the device is completely dry before you put the tracker back in. Moisture inside the mount can lead to oxidation of the contacts and impaired charging. Usually, 1-2 hours at room temperature are enough to dry completely.
Keep spare bracelets in a dry place, protected from direct sunlight. It is not recommended to keep them in a rolled-up state for a long time, as this can lead to the appearance of crevices.
Silicone is a porous material, so perfect dryness before putting on the hand is the key to the absence of skin irritation.