How to open and connect headphones Xiaomi Bluetooth: instructions for beginners

Xiaomi wireless headphones are some of the most popular gadgets, thanks to their combination of price, sound quality and convenience. However, even with such simple devices, users often have questions about how to turn on pairing mode, why the phone can’t see the headphones, or what to do if one ear does not work. This article will help you understand everything from basic connection to solving typical problems.

We'll look at the synchronization process for different models, from the budget Redmi AirDots to the flagship Xiaomi Buds 4 Pro, and also give tips on how to optimize the connection. If you first encounter wireless headphones or switch from another brand, here you will find the answers to all the key questions. Whether you use a Xiaomi smartphone, iPhone or Windows device, the connection algorithm is universal, and we will break down the nuances separately.

Preparing headphones for the first connection

Before syncing headphones with your phone or laptop, they need to be activated correctly. Most Xiaomi models are switched off by default to save charge. To turn them on, it is usually enough to hold the power button (or touchpad) for 3-5 seconds until the indicator starts flashing white or blue.

It is important to note that different models may have their own characteristics:

• 🔋 Redmi AirDots 2/3, Xiaomi Buds 3: The button is located on the body of each earpiece, and you press and hold both at the same time.
• 🎧 Xiaomi Buds 4 Pro, FlipBuds Pro: touch control – touch and hold the panel on both headphones.
• 🔄 Xiaomi Mi True Wireless Earphones (first generation): button is inside the case, activation occurs when the lid is opened.

If the light doesn't flash, check the headphones' charge. Place them in the case for 10-15 minutes -- even the discharged devices should show signs of life after a short recharge. In some models (for example, the Buds 3T Pro), the case is equipped with a reset button, which can be used if the headphones do not respond to standard actions.

Step-by-step: how to connect headphones to the phone

The connection algorithm is the same for most smartphones, but we’ll look at the nuances for Android and iOS devices. Let’s start with Android (including Xiaomi, Redmi, POCO phones):

1. Open Settings → Bluetooth and activate the switch.
2. Make sure the headphones are in pairing mode (flashing indicator).
3. In the list of available devices, find the name of your model (for example, "Redmi AirDots 3 Pro") and tap it.
4. Confirm the connection if a pairing request appears.

For iPhone or iPad, the process is similar, but there are a couple of features:

• 📱 Headphones may require firmware updates through the Mi Home app (if it supports your model).
• 🔊 In some cases, the default sound goes only in one ear - this is solved in the Bluetooth settings (you need to select the "Stereo" mode").

If your phone can’t see the headphones, try the following:

1. Reboot the Bluetooth module on your phone (turn it off and turn it on again).
2. Reset the network settings on the headphones: to do this, hold the power button for 10-15 seconds until the indicator flashes red.
3. Check if the headphones are connected to another device (for example, a laptop).

⚠️ Note: If you connect your headphones to a Windows laptop, they may appear as "Audio Device" in the device manager without the model name. In this case, update the Bluetooth driver through Device Manager.

Common mistakes and their solutions

Even after a successful connection, users face typical problems, and consider the most common ones and how to fix them:

Particularly noteworthy is the problem of earphones being out of sync, where the left and right ears are working separately (e.g., one is connected as "Redmi"). AirDots_L", The second one is not visible, follow the following steps:

1. Place both headphones in the case and close the lid.
2. Wait 10 seconds, then take them out.
3. Hold the buttons on both headphones for 10 seconds until the indicators start flashing red.
4. Connect again via the phone’s Bluetooth menu.

💡

If the Xiaomi Buds 4 Pro headphones don't connect to the iPhone, try first syncing them to an Android device and then resetting through the Mi Home app.This often solves compatibility issues.

How to reset the settings of headphones Xiaomi to factory

If nothing works, you may need to completely reset your headphones, which removes all the devices that are attached and returns the factory settings, depending on the model.

• 🔄 Redmi AirDots 2/3, Xiaomi Buds 3: Place the headphones in the case, then hold the button on the case 15 seconds until the indicator flashes red.
• 🎵 Xiaomi Buds 4 Pro, FlipBuds Pro: touch and hold the touch panels on both headphones for 10 seconds (indicators will light up in red).
• 🔋 Mi True Wireless Earphones (First Generation): Press and Hold the button on the case for 20 seconds.

After reset, the headphones will automatically go into pairing mode. If this does not happen, remove them from the case and hold the power buttons for 5 seconds. Note: after reset, you may need to re-tuning the control gestures and noise reduction level (if the model supports these functions).

⚠️ Attention: On models with ANC (When you're reset, you can get the microphones calibrated, and to restore that, you can place the headphones in your ears and turn on the mode. ANC 30 seconds – the system will automatically reconfigure.

Connection Optimization: How to Improve Bluetooth Stability

Even after a successful connection, users often experience stuttering sounds or sudden communication breaks, which can be related to both the headphone settings and the phone's features. Here are some tips for improving stability:

• 📶 Use Bluetooth 5.0 or later. On older smartphones (such as Bluetooth 4.2), there may be delays in sound.
• 🎵 Turn it off. ANC and transparent mode, if not used – these functions increase the load on the connection.
• 🔋 Watch your charge level: When the headphone battery is below 20%, the connection may become unstable.
• 📱 Close the background apps on your phone, especially those that use Bluetooth (fitness trackers, smartwatches).

For models with Mi Home support (such as Xiaomi Buds 4 Pro), it is recommended to update the firmware through the application.

1. Put the headphones on the phone.
2. Open Mi Home and select your model from the list of devices.
3. Go to the Settings section → Update the firmware.
4. If a new version is available, follow the instructions on the screen.

Xiaomi Buds 4 Pro and newer headphones support LHDC 4.0 technology, which provides high-resolution sound (up to 96 kHz/24 bits), but it requires a smartphone that supports this codec (for example, Xiaomi 12/13 series or POCO F4). If your phone does not support LHDC, the headphones will automatically switch to standard AAC or SBC.

Connection to several devices: laptop, PC, TV

Xiaomi headphones can be connected not only to a smartphone, but also to other gadgets.

Laptop or PC on Windows

The connection algorithm is standard:

1. Open the settings → Devices → Bluetooth.
2. Activate Bluetooth and click "Add Device".
3. Select headphones from the list and confirm the pairing.

If the sound is only in one ear, check the sound settings:

1. Right-click on the sound icon in the tray.
2. Select "Open sound parameters".
3. In the "Exit" section, make sure that you select "Stereo".

MacBook or iMac

On Apple devices, additional configuration may be required:

• 🍎 Go to System Settings → Bluetooth.
• 🔗 Connect the headphones, then open System settings → Sound.
• 🎧 Exit tab – select your headphones and set the sound format "AAC" (for better compatibility).

Bluetooth TV

Not all TVs support Bluetooth Low Energy, which Xiaomi headphones use.

• 📺 Check if there is a “Bluetooth” item on the TV menu (on Xiaomi) TV It's in the Settings. → Connections).
• 🔌 If Bluetooth is not available, use a Bluetooth transmitter (e.g., Xiaomi Bluetooth Audio Receiver) connected to a 3.5mm port or a Bluetooth transmitter. HDMI ARC.

💡

To connect to your TV, choose headphones that support the aptX Low Latency codec (such as the Xiaomi Buds 4 Pro) to avoid audio delay.

How to check the originality of headphones Xiaomi

The market is full of fake wireless headphones, especially popular models like the Redmi AirDots, and here are a few ways to distinguish the original from the replica:

• 📦 Packaging: The original box has a holographic sticker with a serial number that can be checked on Xiaomi's website.
• 🔊 Sound: Counterfeiting often lacks codec support AAC and aptX, which makes the sound "empty" and without bass.
• 📱 Original headphones (such as Buds 4 Pro) are recognized in the Mi Home and allow you to update the firmware.
• 🔋 Charging: The case of the original headphones is charged in 1-1.5 hours, fakes – 3 hours or more.

To check the serial number:

1. Find the sticker on the cover or in the documentation.
2. Go to the Mi Verify website.
3. Enter the serial number and the captcha.

If the site gives an error or the data do not match, you are a fake.

⚠️ Attention: Counterfeiting often has a simplified control scheme (for example, no gesture support) and quickly fails. ANC — in replicas, noise reduction is either absent or works with strong background noise.

FAQ: Answers to Frequent Questions