How to wear Xiaomi AirDots: instructions with photos and comfort tips

Xiaomi AirDots wireless headphones (including the Pro, Pro 2, 3, SE and others) have become some of the most popular gadgets due to a combination of price, sound quality and convenience. However, even such compact devices require proper use — especially when it comes to wearing them. Wrong position in the ear can lead to loss during movement, deterioration of sound insulation or even discomfort with prolonged wear.

In this article, we will discuss a step-by-step algorithm for how to dress Xiaomi AirDots so that they sit tight, do not fall out and ensure maximum sound quality. We will also learn how to match the size of the instalments, check the tightness and avoid common mistakes. And for those who are faced with problems (for example, one earphone constantly falls out or the sound seems muffled), we have prepared practical solutions with explanation of the reasons.

Note that the manual is suitable for most models of the line, but there are nuances for AirDots Pro 2 (active noise cancellation) and AirDots 3 (with a modified body design), which we will also touch on.

1. Preparation of headphones for the first use

Before you wear Xiaomi AirDots, make sure they are ready to go, especially if you’ve just unpacked your device or haven’t used it in a while.

First, check the battery power, and if the headphones are dead, they can shut down at the most inopportune moment, or they can give low-charge warnings, which is distracting, to find out what the current charge is.

• 🔋 Open the case cover - the indicators on the front panel will show the level of charge of the headphones and the case itself.
• 📱 Connect headphones to your smartphone via Bluetooth – in the connection status (on Android or iOS) will display the percentage of charge of each headphone.

Second, update your firmware if you have an update available, and outdated software can cause problems with connection or sensors.

1. Put the headphones on the phone.
2. Open the Mi Home app (or Xiaomi Wear for new models).
3. Go to the device section and check for updates.

💡

If you have AirDots Pro 2 or newer headphones, use the Xiaomi Earbuds app – it has more settings to customize control and sound.

Finally, clean your earbuds and earbuds of dust or earwax.

• 🧴 Cotton swab soaked in alcohol (do not overdo it with moisture!).
• 🪥 Soft brush (for example, toothbrush) to clean the speaker grille.

2. How to choose ear-sized ambushes

One of the key factors of comfort and sound quality is the correct size of the mounts. Complete with Xiaomi AirDots, there are usually 3 pairs of silicone nozzles: S (small), M (medium), and L (large), Less commonly there are models with 4 sizes (added XL).

To determine your size:

1. Try to wear headphones with an M nozzle (it is installed by default).
2. If you feel pressure or pain after 10-15 minutes, take an L size.
3. If the headphones fall out when the head moves, try the S.

For the exact check:

Shake your head – the headphones should not move|Close your mouth and nose, then make the movement as if blowing your ears (Valsalva test) – if you hear “click”, the tightness is broken|Wear headphones for 30 minutes – no pain or redness in the ear canal-->

Importantly, different AirDots models may have different shapes, such as AirDots 3 having more oval nozzles, and Pro 2 having longer tails for better fixation.

3. Step-by-step instructions: how to insert Xiaomi AirDots into your ears

Now, to the process itself, follow this instruction to make the headphones as tight and comfortable as possible.

1. Take the earpiece with your right hand (for your right ear) and unfold it so that the microphone is pointing down and slightly forward (to your lips). Most models have an R (right) or L (left) label on their body.
2. Pull the earlobe down and back with your left hand, opening the ear canal for deeper entry.
3. Insert the earphone into the ear at an angle of ~45° (the earpiece nose should "look" forward), then slightly scroll it forward and upwards so that it "sit" on the antibody galis (the cartilage protrusion inside the ear).
4. Check the density of the fit: slightly pull the earphone down - if it does not move, everything is correct.

Repeat the same steps for the left ear, but mirror.

A critical mistake most users make is that they stick their headphones vertically, so they don't stick to the cartilage and fall out when they're moving, and the right angle of entry is the key to a stable landing.

4. Checking the leakage and sound quality

Once the headphones are on, make sure they provide sufficient passive noise protection.

1. Turn on the music at medium volume.
2. If you palm your ear with your earpiece, if the sound is almost unchanged, the tightness is good, if the sound is much quieter, the earpiece fits loosely.
3. Try changing the size of the nozzle or repeat the process of putting on.

For active noise cancellation (ANC) models (e.g. AirDots Pro 2):

• 🎧 Activate the mode. ANC in the application or through sensory control.
• 🔊 You should feel a slight "pressure" in your ears - this is normal (the effect is created by opposite sound waves).
• 🚇 On the subway or plane ANC It will reduce noise by 20-30 dB, but will not eliminate it completely.

If the sound seems to be muted or "deaf," perhaps the earbud speaker is filled with earwax. Clean it with a soft brush, as described in the first section.

💡

The tightness directly affects the quality of the bass, and if you land poorly, the low frequencies will blow out, and the music will lose volume.

5. Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when using Xiaomi AirDots.

Another common problem is the incoherence of the headphones (one goes off or only sounds in one).

• 🔄 Headphones are not reset to factory settings (hold the button on the case for 10-15 seconds until the red indicator flashes).
• 📱 Bluetooth settings on the phone have enabled the "Mono" mode (turn it off).
• 🔋 Different charge levels in headphones (charge both to 100%).

💡

If the headphones do not connect after reset, remove them from the list of conjugated devices on the phone, then reconnect again.

6. Tips for long-term wear without discomfort

Even perfectly matched headphones can cause fatigue when used for hours to come.

• ⏳ Take breaks every 60-90 minutes for 5-10 minutes, allowing your ears to breathe".
• 🧴 Use ear moisturizers (such as Remo-Wax) if you feel dry.
• 🎵 Alternate volume: Do not listen to music at maximum for more than 20 minutes in a row.
• 🧘 For sleep or long flights, choose models with soft foam bottles (for example, Comply Foam).

AirDots Pro 2 and AirDots 3 have a Transparency Mode feature that lets in ambient sounds, which is useful if you need to communicate without taking off your headphones or navigate in space (like running outside) activated by double touching the sensor.

Warning: If you feel congested ears or pain after wearing AirDots, this may be a sign of:

• 🩺 The sulphur cork (refer to the LORA).
• 🦻 Allergies to silicone (try hypoallergenic nozzles).
• 🔊 Too much pressure. ANC (turn off noise cancellation).

7. Features for different models Xiaomi AirDots

Although the principle of wearing most AirDots is similar, some models have unique nuances:

For touch-controlled models (e.g. Pro 2):

• 👆 One touch - playback/pause.
• 👆👆 Double touch – the next track (or activation) ANC).
• 👆👆👆 Triple touch - previous track.

Note: If the sensors are triggered by accident (for example, when scratching your ear), turn off some of the gestures in the settings of the Xiaomi Earbuds app.

Frequently asked questions