The Xiaomi Amazfit Bip remains one of the most popular fitness trackers thanks to its combination of affordable price, long autonomy and wide functionality. However, many users face difficulties in the first setup, from connecting to a smartphone to calibrating sensors. This article will help you understand all the nuances from basic settings to hidden features that the manufacturer does not always advertise.
It is important to understand that Amazfit Bip works in conjunction with the official Mi Fit app (or Zepp for new versions), and it is through this that most of the settings are carried out. While some functions – such as changing the dial or adjusting notifications – require special attention. We will consider the process Step-by-step, taking into account the latest firmware updates and the characteristics of different regions (including restrictions for Russian users).
If you’re just unpacking your watch or want to recheck your current settings, start with the sync section, and for advanced users, the Advanced Settings section will be helpful, where you’ll learn how to increase battery life or adjust weather display without notice.
1.Preparation for the first setup: what to do before turning on the clock
Before you start setting up the Amazfit Bip, make sure you have everything you need:
- 📱 Smartphone on Android 5.0+ or iOS 10.0+ (iPhone functionality is limited)
- 🔋 Charger with a charger USB-port (includes a cable with a magnetic connector)
- 🌐 Stable Internet connection (for downloading applications and updates)
- 📌 Xiaomi or Zepp account (can be created during setup)
Pay special attention to regional restrictions: In 2023, Xiaomi separates services for different countries: for example, in Russia, only the Mi Fit app is officially supported, while in Europe and the United States, the more modern Zepp is available. This affects the available features – for example, Zepp has more options for dials and sleep analytics.
Also check the firmware version of the watch, which is outdated, and which may cause synchronization failures, to see the current version:
- Click on the physical clock button to open the menu.
- Go to Settings. → About the device.
- Check out the line Software Version (current for 2026 - 1.1.6.XX and above).
⚠️ Note: If the firmware version is below 1.1.5.00, be sure to update the watch through the app before setting up. In older versions there are bugs with notification synchronization and GPS.
2. Synchronization with the phone: step-by-step instructions
The process of connecting the Amazfit Bip to a smartphone takes no more than 5 minutes, but requires exact following the instructions. Consider the process using the Mi Fit application (for Zepp, the steps are similar, but with a different interface).
Step 1: Installation of the application
- 📲 Download Mi Fit from Google Play or App Store.
- 🔐 Register an account (you can use email, phone number or Google/Facebook).
- 📱 Allow all application requests: access to notifications, location, contacts.
Step 2. Connect the clock
- Turn on the Amazfit Bip by pressing the button for 3 seconds.
- In the Mi Fit app, click Profile → Add Device → Watch → Amazfit Bip.
- Follow the instructions on the screen: Confirm the pairing on the watch (press the button) and the phone.
- Wait until the synchronization is complete (it can take up to 2 minutes).
The watch is displayed in the list of devices in Mi Fit|
A dial (not a download logo) appeared on the watch screen |
The appendix shows battery charge information |
App has requested permission to notify-->
Step 3: Set up the main parameters
After connecting, the application will offer:
- 👤 Enter personal data (gender, age, weight, height) – this is necessary for the correct calculation of calories and steps.
- 🏃♂️ Select activity goals (e.g. 10,000 steps per day).
- 🔔 Set up notifications (see next section).
⚠️ Note: If the watch is not connected, try: Reboot the Amazfit Bip (click the button on the button) 10 Turn off Bluetooth on your phone and turn it back on. Remove the watch from the device list in your phone's Bluetooth settings and repeat pairing. 3. By default, the Amazfit Bip shows notifications from all smartphone applications, which quickly drains the battery and clogs the screen with unnecessary information. You can configure filtering via Mi Fit or directly in the system. Android/iOS. Method 1: Through the Mi Fit app, Open Mi Fit and select your watch. Go to Notifications → Notification management. Turn on the Tool to Show notifications. Select the apps you want to see alerts from on your watch (e.g. WhatsApp, Telegram, Calls). Method 2: Through phone settings (Android) 📱 Open the Settings. → Annexes → Mi Fit → Notifications. 🔔 Enable permission to display notifications. 🔕 Disable unnecessary apps in the list Other notifications. Notification type How displayed on the clock Impact on the battery Call Name of the caller + Reject/Respond buttons (on iPhone alert only) Low Messages (SMS, Message text (up to 120 characters) Average calendar Event name + Time Low System Notifications (Updates, Ads) App icon High (Frequent Alerts) Important: On iPhone, notifications only work for incoming calls and SMS. Alerts from third-party messengers (such as Viber or Telegram) are not supported due to Apple restrictions. 💡To prevent notifications from being duplicated on your watch and phone, in Android settings, turn off the Repeat Notifications option for apps that are already showing on the Amazfit Bip. 4. Personalization: dials, widgets and interface One of the main advantages of the Amazfit Bip is the ability to customize the appearance. The watch supports interchangeable dials, customization of the order of widgets and even changing fonts (in some firmware). 🎨 In the Mi Fit app, go to the Device Profile → Dials. 🔍 Choose your favorite option from the ones offered (usually free). 3–5 piece). 📥 Click Download and apply - the dial will be updated on the clock within a period of time 10 To install custom dials (not from the official store) you will need: Download the dial file in.bin format (for example, from the AmazfitWatchFaces site). Place the file in the folder Mi Fit/WatchFace phone-on. In the Mi Fit app, update the list of dials (pull the screen down). ⚠️ Attention: Unofficial dials may contain errors that will cause the watch to reboot. Before installing, check the reviews of a particular file. Configure widgets on the Amazfit Bip, widgets are available for quick access to functions. To change their order: On the clock, swipe up from the home screen to open the widget list. Press and hold the button to enter edit mode. Use left/right swipes to swap widgets. Press the button again to save the changes. How to return a standard dial if the watch is glitchy? If after installing the custom dial, the Amazfit Bip begins to slow down or not respond to presses, reset it to factory: 1. In Mi Fit, select any official dial and apply it. 2. If the clock does not respond, reset through Settings. → About the device → Reset (activity data will be stored in the application). 5. Fitness settings: pedometer, pulsemeter, GPS The Amazfit Bip is positioned as a fitness tracker, so getting the sensors right is critical for data accuracy. Let's look at the key parameters. Pedometer calibration The default watch counts the steps with error. ±10% To improve accuracy: Take exactly 100 steps (measure on a flat surface). → Settings → Calibrate steps. Enter the actual number of steps (100) and save. ❤️🔥 Enable continuous pulse measurement in Settings → Heart monitoring → Frequency of measurements → Every 1-5 minutes. 📊 To save battery, select Manual mode (pulse will be measured only on request). 🚨 Set up high/low pulse alerts in Notifications → Heart rate warnings: Use of GPS Built-in GPS In Amazfit Bip, you can track routes without your phone. To enable: On the watch, select a sports mode (e.g., Running). → Hold the button to start recording the workout with GPS. Turn off the battery to save money. GPS In the training settings, if not needed. function Accuracy Impact on the battery ±5-10% (after calibration) Low wear the watch on your wrist, not in your pocket ±3-5 beats/min (at rest) High (at continuous measurement) Use the "Every 10 minutes" mode" GPS ±10 meters (in the city) Very high Include only for training 💡For maximum accuracy, wear a watch 2-3 fingers above the wrist and hold your hand tightly but not tightly. Relaxed sensor position reduces the accuracy of the pulsemeter by 20-30%. 6. Advanced settings: how to extend battery life and unlock hidden features Amazfit Bip standard settings are not always optimal. Here are some tricks that will help increase autonomy and add useful features. Optimize power consumption 🔋 Turn off automatic brightness (in Settings) → Display. → Brightness → Manual) and set the value of 2-3. 🌙 Enable sleep mode (in Settings) → Sleep mode at night – this will turn off the display and notifications. 📵 Reduce the frequency of data synchronization with the phone to 1 time per hour (in Mi Fit). ❄️ Turn off vibration for unnecessary notifications (in Settings) → Notifications → Vibration. Hidden functions 🔍 Phone search: Select the clock menu → Find the phone – the smartphone will emit an audio signal. 📸 Camera Control: In Mi Fit, enable Camera Control to use the watch as a selfie remote. 🌦️ Weather for 3 days: swipe down on the home screen to see the forecast (you need to turn on Mi Fit). 🎵 Music control: while playing the track, a player with the "Pause"/"Next Track" buttons will appear on the phone. Reset to factory settings If the watch starts to glitches (not synced, not responsive to presses), reset: On the clock, go to Settings → About the device → Reset. Confirm the action by pressing a button. After rebooting, re-synchronize the clock with your phone. ⚠️ Attention: Reset will delete all data from the watch, but the information in Mi Fit (steps, training) will remain. If the reset does not help, check the physical condition of the button - its jamming is a common cause of "hangs." 7. Even after setting up correctly, Amazfit Bip users face typical problems. Here's how to solve them: Problem Possible cause Clocks not synced Bluetooth crash, outdated firmware Reboot watch and phone, update Mi Fit and watch firmware Not coming notifications No permissions from Mi Fit Check notification settings in phone and app Battery goes down fast Constant pulse measurement, high brightness Turn off continuous pulse, reduce brightness, turn off GPS It's not working. GPS Weak signal, outdated firmware Update the software, wait 1-2 minutes before training in the open space Clocks do not vibrate Disabled vibration in settings Include in Settings → Notifications → Vibration If the watch is not on: Put it on charge for 30 minutes (even if the indicator is not on). Press and hold the 15-20 second button for forced reset. If the screen remains black, check the charging contacts for contamination (wipe with alcohol). 💡If the watch slows down after the firmware update, reset and do not restore the backup from Mi Fit – sometimes it contains outdated data that causes conflicts. FAQ: Questions about the Amazfit Bip: Can I swim with an Amazfit Bip? Yes, the watch has 5 protections ATM, But you don't want to go deeper than 50 meters or expose your watch to hot water (like a sauna) and then rinse the body with fresh water and dry it. How do you update your firmware on the Amazfit Bip? Updates come automatically through Mi Fit, but you can check manually: Open Mi Fit and select your watch. → Update firmware. If a new version is available, click Update and wait until it is completed (don't turn off Bluetooth!). Important: During the upgrade, the watch battery should be charged at least 50 times%. Why does the Amazfit Bip show the wrong number of steps? The pedometer error is related to: Incorrect calibration (see section 5). Wearing a watch not on the hand (for example, in a pocket); Intense hand movements (for example, when working with dumbbells). For accuracy, wear a watch on your leading hand (right-handed) and calibrate it every 1-2 months. Can I answer my calls with the Amazfit Bip? No, there's no speaker and no microphone on the Amazfit Bip. The watch can only: Show an incoming call (name/number); Decline a call (on Android); Vibrate when you call. For direct calls from the watch you need models richer, for example, Amazfit GTR 3. How to reset activity data to Mi Fit? To zero out the statistics of steps, calories or sleep: Open Mi Fit and go to Statistics. Click on the icon ⚙️ In the upper right corner, select Reset and confirm. Attention: This will only delete data on the phone. The statistics for the current day will remain on the clock until the next synchronization.