Buying a new activity tracker is always a pleasant anticipation, but the first launch can baffle the unprepared user.The Xiaomi Mi Band 4 is a popular fitness bracelet that requires the correct initial configuration to work properly.Without being tied to a smartphone, the device is just a simple pedometer with a base screen.
The activation process takes no more than ten minutes if you prepare everything you need in advance. In this article, we will discuss in detail how to avoid typical pairing errors and how to unlock the full potential of the gadget. The correct configuration of the Mi Band 4 will ensure the accuracy of measurements and stable operation of notifications.
Before you start, make sure that the bracelet is charged at least 20-30%. This is a critical point, since the process of updating the firmware, which often occurs immediately after you connect, requires energy. If the battery runs down while writing system files, the device may stop responding to commands.
The basis of the Xiaomi ecosystem is a special application that acts as a control center. For Android owners, this is the Mi Fit application (Zepp Life) or Xiaomi Wear, and for iOS, the choice is limited only to official software from the manufacturer.
Once installed, you need to register for a Mi Account. Without an account, synchronizing data and storing training history are impossible. When registering, specify the correct region, as this depends on the list of available features and the server on which your data will be stored.
In the phone settings before launching the application, it is important to enable geolocation (GPS). The Bluetooth Low Energy protocols used by the bracelet require permission to access the location to find the device stably. Without GPS enabled, the phone simply will not see the tracker in the list of available gadgets.
- 📱 Download the Zepp Life or Mi Fitness app from the official store.
- 📝 Register an account by choosing the right region of residence.
- 📍 Turn it on. GPS Bluetooth in the settings of the smartphone operating system.
- 🔋 Charge the bracelet to at least 20% before first switching on.
⚠️ Note: Do not try to connect the bracelet directly through the Bluetooth menu in the phone settings. The pairing must occur exclusively within the application interface, otherwise the device may lock for third-party connections.
When the app is up and you're logged in, go to the Profile tab at the bottom right of the screen, and there's a new device add button, usually marked with a + icon or a "Add Device" sign, and the system will tell you to select the type of gadget -- click on the activity tracker image.
The app will start scanning the surrounding space, at which point, grab the bracelet in your hands and shake it slightly to wake the screen. The Mi Band 4 display should show a vibration signal and a Bluetooth icon, indicating readiness for (conjugation).
As soon as the list on the smartphone screen appears the inscription "Mi Band 4", click on it. On the tracker screen will appear a request for confirmation of communication, indicated by the symbol "√" or vibro signal. Press the touch button of the bracelet for confirmation, after which the automatic synchronization of time and date will occur.
☑️ Checklist of successful pairing
Sometimes the search process can take longer. If the phone doesn't see the device for more than 30 seconds, try rebooting Bluetooth on your smartphone or logging out of the app and logging in again. Also make sure the bracelet hasn't been previously linked to another account without an uncoupling.
Immediately after the first connection, the app will suggest updating the bracelet software. The firmware is the internal program of the device that manages all its functions. New versions often contain error fixes, new dials and improvements in the stability of the sensors.
The upgrade process takes 2 to 5 minutes depending on the version, during which time the screen of the bracelet will be turned off, and the phone will display the percentage of execution, it is strongly recommended not to interrupt this process or go far from the phone.
What to do if the update is suspended?
Once you update, check your notification settings immediately. From the device menu in the app, look for the "Application Notifications" section, where you can choose which programs you want to receive vibration signals on your wrist.
- 🔔 Turn on call display, SMS and messaging.
- 🚫 Disable notifications from unnecessary games or marketing apps.
- ⏰ Set up a reminder interval for a sedentary lifestyle.
- 🌙 Activate the “Do Not Disturb” mode at night.
⚠️ Note: Zepp Life must have permission to work in the background to work with notifications. Android operating systems often "kill" background processes to save energy, resulting in message loss.
One of the most important features for Russian-speaking users is to set Russian. By default, the Mi Band 4 can only display information in English or Chinese. To change this, you need to find the section “Bracelet settings” or “Device profile” in the application.
In the list of languages, select "Russian" or "Russian", and after confirming the selection, the localization file will be loaded onto the bracelet, and the menu interface and incoming messages will be displayed in Cyrillic, which makes it much easier to read long texts and navigate the menu.
If Russian is not available, make sure you have the latest version of the app and firmware installed. In some regions or firmware versions (for example, Chinese CN instead of Global), the list of languages may differ.
| Parameter | Default value | Recommended value | Where to change |
|---|---|---|---|
| Interface language | English / Chinese | Russian | Profile -> Language |
| Wrist lifting | Included. | Turned off (for savings) | Bracelet settings |
| Screen brightness | Medium | Auto or Minimum | Bracelet settings |
| Vibration. | Medium | By preference. | Bracelet settings |
You can also adjust the sensitivity of the wrist lift in this section, so if the screen lights up too often when you wave your hands, it's better to turn it off or set a minimum sensitivity, which will significantly extend battery life.
💡
To maximize charge savings, turn off constant pulse monitoring, leaving only periodic measurements every 10-30 minutes. This will add 2-3 days of work to the bracelet.
Dials allow you to personalize the look of the device. The app has a Store, where you can choose a static image or animated picture. The choice is huge, from classic watches to minimalist step indicators.
To set a new dial, go to the Dials section in your device profile. Choose your favorite design and click "Install." The download process takes about a minute, after which the image will appear on the Mi Band 4 screen.
Some users prefer to create their own faces from photos, and in the dial store you need to select the option of creating from a photo, download a picture from your phone and adjust the location of the time and date elements.
It's worth remembering that complex animated dials consume more energy than static black and white images. If autonomy is important to you, choose simple designs without unnecessary graphics.
Despite the simplicity, there are sometimes technical difficulties: the bracelet may not charge, not synchronize data or stop vibrating, most often the problem lies in the contamination of the contacts of the charger or the tracker itself.
If the bracelet doesn't respond to charging, wipe the metal contacts on the back with a soft dry cloth.Oxidation or sweat can prevent current from passing.Also try connecting the cable to another. USB-port.
In case of software failures, a full reset helps. In the application, in the device settings, find the item "Untie" or "Reset", and then on the bracelet itself in the settings menu (cogs), select "Reset". After that, the setup procedure will have to be reset.
💡
90% of connection problems are solved by restarting Bluetooth on the phone and re-authenticating the app.
If the screen goes out too quickly, check the screen timeout settings. However, it is worth considering that the Xiaomi Mi Band 4 has a small battery, and the constant operation of the display will quickly drain it. The optimal screen burning time is 5-10 seconds.